Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways User Guide

MultiVOIP User Guide Technical Configuration (Analog)
201
In each field, enter the values that fit your particular system. 

MultiVOIP User Guide Technical Configuration (Analog)
202
The SNMP Parameter fields are described in the table below.
SNMP Parameter Definitions
Field Name Values Description
Enable SNMP
AgentY/N Enables the SNMP code in the
firmware of the 
MultiVOIP.  This
must be enabled for the 
MultiVOIP
to communicate with and be
controllable by the
MultiVoipManager software.
Default:  disabled
Trap Manager Parameters
Address 4 places; n.n.n.n
n = 0-255IP address of MultiVoipManager
PC.
Community
Name-- A...

MultiVOIP User Guide Technical Configuration (Analog)
203
11. Set Regional Parameters  (Phone Signaling Tones & Cadences). ).
This dialog box can be reached by pulldown menu, keyboard
shortcut, or sidebar.
Accessing “Regional Parameters”
Pulldown Icon
Shortcut Sidebar
     Ctrl + R 

MultiVOIP User Guide Technical Configuration (Analog)
204
The Regional Parameters screen will appear. For the country selected,
the standard set of frequency pairs will be listed for dial tone, busy
tone, ‘unobtainable’ tone (fast busy or trunk busy), and ring tone.
In each field, enter the values that fit your particular system. 

MultiVOIP User Guide Technical Configuration (Analog)
205
The Regional Parameters fields are described in the table below.
“Regional Parameter” Definitions
Field Name Values Description
Country/
RegionUSA, Japan, UK,
CustomName of a country or region that
uses a certain set of tone pairs for
dial tone, ring tone, busy tone, and
‘unobtainable’ tone (fast busy
tone). In some cases, the tone-pair
scheme denoted by a country name
may also be used outside of that
country.  The “Custom” option
(button) assures...

MultiVOIP User Guide Technical Configuration (Analog)
206
 
“Regional Parameter” Definitions (cont’d)
Field Name Values Description
Cadence
(msec) On/Offn/n/n/n
four integer time
values in
milli-seconds;
zero value for
dial-tone
indicates
continuous toneOn/off pattern of tone durations
used to denote phone ringing,
phone busy, connection
unobtainable (fast busy), and  dial
tone (“0” indicates continuous
tone).  Default values differ for
different countries/regions.
Although most cadences have only
two...

MultiVOIP User Guide Technical Configuration (Analog)
207
12. Set Custom Tones and Cadences (optional).  .   The Regional
Parameters dialog box has a secondary dialog box that allows you to
customize DTMF tone pairs to create unique ring-tonesdial-tones,
busy-tones or “unobtainable” tones (fast busy signal) for your system.
This screen allows the user to specify tone-pair attributes that are not
found in any of the standard national/regional telephony toning
schemes.  To access this customization...

MultiVOIP User Guide Technical Configuration (Analog)
208
The Custom Tone-Pair Settings fields are described in the table below.  
Custom Tone-Pair Settings Definitions
Field Name Values Description
Tone Pairdial tone,
busy tone,
ring tone,
‘unobtainable’
toneIdentifies the type of telephony
signaling tone for which
frequencies are being specified.
TONE PAIR VALUESAbout Defaults:  US telephony
values are used as defaults on
this screen.  However, since this
dialog box is provided to allow
custom...

MultiVOIP User Guide Technical Configuration (Analog)
209
Custom Tone-Pair Settings Definitions
Field Name Values Description
Cadence 1 integer time
value in
milli-seconds;
zero value for
dial-tone
indicates
continuous toneOn/off pattern of tone durations
used to denote phone ringing,
phone busy, and  dial tone (“0”
indicates continuous tone).
Cadence 1 is duration of first
period of tone being “on” in the
cadence of the telephony signal
(which could be ring-tone, busy-
tone, unobtainable-tone, or dial-...

MultiVOIP User Guide Technical Configuration (Analog)
210
13. Set SMTP Parameters (Log Reports by Email).  The SMTP
Parameters screen is applicable when the VOIP administrator has
chosen to receive log reports by email (this is done by selecting the
“SMTP” checkbox in the Others screen and selecting “Enable SMTP”
in the SMTP Parameters screen.).  The SMTP Parameters screen can
be reached by pulldown menu, keyboard shortcut, or sidebar.
Accessing “SMTP Parameters”
Pulldown Icon
Shortcut Sidebar
 Ctrl +...