Multi-Tech Systems Multivoip Model Mvp400/800 Standalone Voice/ip Gateway Quick Start Guide

31 Configuring  the MultiVOIP
15. Enter the Voice Channel number corresponding to the
phone number entered.
16. Enter a description in the H.323 ID box to identify the
phone number.  For this example, you could enter a
description such as “Jerry’s Desk”.
17. Enter the Port IP Address of the MultiVOIP you are
currently configuring in the IP Address box.
18. Click OK when you are finished.  The Phone Directory
Database dialog box displays with your second entry in
the window. 

MultiVOIP Quick Start Guide
3219. Repeat this process for all channels and then click OK in
the Phone Directory Database dialog box.
Note: When entering multiple channels, you can also click
Copy From in the Add/Edit Phone Entry, enter the
phone number you want to copy, click OK in the COPY
FROM dialog box.  Change the information as needed,
and click OK in the Add/Edit Phone Entry dialog box.
20. The following dialog box displays.  Click OK to download
setup.
21. Once the setup program receives a...

33 Configuring  the MultiVOIP
23. Check to ensure that the BTG LED on the MultiVOIP 400/
800 is Off after the download is complete. This may take
several minutes as the MultiVOIP 400/800 reboots.
24. You are returned to the Multi-Tech Installation CD screen
from which you can load the Acrobat Reader to your PC.
This allows you to view and/or print the User Guide by
clicking the Install Manuals icon. 

MultiVOIP Quick Start Guide
34
Building a Proprietary Phonebook Directory
To build your proprietary MultiVOIP 400/800 Phone
Directory (in an H.323 environment without the
GateKeeper option enabled), select the Proprietary
Phonebook option, then configure the “Master” MultiVOIP
400/800 and then add the “Slave” MultiVOIP 400/800s (or
other H.323 endpoints). Configuring the “Slave” MultiVOIP
400/800 is discussed later.
The first MultiVOIP 400/800 to be configured is designated
the “Master” and contains the...

35 Configuring  the MultiVOIP
Note: The Slave Status button displays the Slave VOIP
Status dialog box used for viewing phone number, IP
address, status, and description of slave units.  See
“Configuring Your Slave MultiVOIP 400/800s” for details.
1. Click Add to begin building your phone directory database.
The Add/Edit Phone Entry dialog box displays.
2. Enter the unique phone number of the local device in the
Phone Number box (for example, 101) and indicate that
the local device is connected to Channel...

MultiVOIP Quick Start Guide
36Note: Hunting is a series of telephone lines organized in
such a way that if the first line is busy the next line is
hunted and so on until a free line is found. For this
example, assign the phone entry to HUNT GROUP #1.
Once you have assigned this entry to a Hunt Group (or
NO HUNT), you must enter the IP Address of the Master
MultiVOIP 400/800 in the IP Address box (for example,
204.022.122.118).
Note: The Port box becomes active as you begin to enter
the IP Address. The...

37 Configuring  the MultiVOIP
6. To configure Channel 2 on the Master MultiVOIP 400/800,
click Add and the Add/Edit Phone Entry dialog box
displays again.
7. Enter the phone number for the MultiVOIP 400/800 in the
Station Information group Phone Number box.  For
example, 102.
8. Enter a description in the Description box for the remote
MultiVOIP 400/800 phone number for Channel 2. For
example, “New York Office 2.” Then, enter the voice
channel number in the Voice Channel box. 

MultiVOIP Quick Start Guide
389. In the Station Identification group, select HUNT GROUP
#1 from the Hunt Group list, enter the New York Office 2’s
IP Address (204.022.122.118), and accept the H.323
industry standard Port value (1720) used to communicate
with other H.323 endpoints.
10. Click OK and you are returned to the Phone Directory
Database dialog box which now includes the second
number and related information in the Phone Number list.
Note: When entering multiple channels, you can also click
Copy...

39 Configuring  the MultiVOIP
11. Add all other phone numbers (slave units and stand-alone
units) to the Phone Directory database. To add Channel 1
of the Slave MultiVOIP 400/800, click Add.  The Add/Edit
Phone Entry dialog box displays again.
12. Enter the phone number for the “Slave” MultiVOIP 400/800
in the Phone Number box.  For example, 201.
13. Click inside the Description box and enter a description
for the remote MultiVOIP 400/800 phone number for
Channel 1.  For example, “London Office 1”.
14....

MultiVOIP Quick Start Guide
40
16. To add Channel 2 of the Slave MultiVOIP 400/800, click
Add.  The Add/Edit Phone Entry dialog box displays
again.
17. Enter the phone number for the remote (Slave) MultiVOIP
400/800 in the Station Information group Phone
Number box.  For example, 202.
18. Enter a description for the remote MultiVOIP 400/800
phone number for Channel 2 in the Description box. For
example, “London Office 2”.
19. In the Station Identification group, select HUNT GROUP
#2 from the Hunt Group...