MSI X58 Proe Manual

Intel ICH10R SATA RAID▍MS-7522

C-19
Intel ICH10R SATA RAID▍MS-7522

memory n the machne, and the usage pattern of the array. Heavly scattered wrtes 
are bound to be more expensve.
RAID 10 (Mrrored Strpes) :
A RAID 1 array of two RAID 0 arrays.
Strp Szes:
Select the desred strp sze settng. As  ndcated, the optmal settng s 128KB. Se
-
lectng any other opton may result  n performance degradaton....

C-20
Intel ICH10R SATA RAID▍MS-7522
Intel ICH10R SATA RAID▍MS-7522

(3) Select Member Hard Drve(s)
Then select the member dsk (the target dsk) that you wsh to use and then clck “-->” 
to move t to the “Selected” field. Then clck “Next” to contnue.
Please note that the exstng data on the selected hard drve(s) wll be deleted perma
-
nently. Do not forget to back up all the mportant data before contnung. 

Intel ICH10R SATA RAID▍MS-7522

C-21
Intel ICH10R SATA RAID▍MS-7522

(4) Specfy Volume Sze
Specfy the amount of avalable array space to be used by the new RAID volume. You 
may enter the amount n the space or use the slder to specfy. It  s recommended you 
use 100% of the avalable space for the optmzed usage. For RAID 0 volume,  f you do 
not specfy 100% of the hard drve space, the rest hard drve space wll be worked as 
RAID...

C-22
Intel ICH10R SATA RAID▍MS-7522
Intel ICH10R SATA RAID▍MS-7522

(6) Start Mgraton 
The mgraton process may take up to two hours to complete dependng on the sze of 
the  dsks  beng  used  and  the  strp  sze  selected.  A  dalogue  wndow  wll  appear  stat
-
ng  that  the  mgraton  process  may  take  consderable  tme  to  complete,  meanwhle  a 
popup  dalogue  at  the  taskbar  wll  also  show...

Intel ICH10R SATA RAID▍MS-7522

C-23
Intel ICH10R SATA RAID▍MS-7522

recovery voLuMe creation
Important
Creatng a recovery volume wll permanently delete any exstng data on the drve se-
lected as the recovery drve. Back up all mportant data before begnnng these steps.
Ths opton may or may not be avalable dependng on your system configuraton. If you do not see the opton lsted, refer to Recovery Volume Creaton n...

C-24
Intel ICH10R SATA RAID▍MS-7522
Intel ICH10R SATA RAID▍MS-7522

Recovery Volume n Advanced Mode Creaton■
Important
Creatng a recovery volume wll permanently delete any exstng data on the drve se-
lected as the recovery drve. Back up all mportant data before begnnng these steps.
To create a recovery volume n Advanced mode, use the followng steps:
Open the Intel Matrx Storage Console. (Start --> All Programs --> Intel Matrx...

Intel ICH10R SATA RAID▍MS-7522

C-25
Intel ICH10R SATA RAID▍MS-7522

Modfy the recovery volume name f you wsh.
Select a hard drve to be used as the master hard drve for the recovery volume.5.
6.
Select a hard drve to be used as the recovery hard drve for the recovery volume.7. 

C-26
Intel ICH10R SATA RAID▍MS-7522
Intel ICH10R SATA RAID▍MS-7522

Select an update polcy.8.
Select Fnsh to begn recovery volume creaton.9. 

Intel ICH10R SATA RAID▍MS-7522

C-27
Intel ICH10R SATA RAID▍MS-7522

degraded raid array
A RAID 1, RAID 5 or RAID 10 volume s reported as degraded when one of ts hard drve 
members fals or  s temporarly dsconnected, and data mrrorng  s lost. As a result, the 
system  can  only  utlze  the  remanng  functonal  hard  drve  member.  To  re-establsh 
data  mrrorng  and  restore  data  redundancy,  refer  to  the...

C-28
Intel ICH10R SATA RAID▍MS-7522
Ext Intel RAID Opton ROM, and then reboot to Wndows system.
When prompted to rebuld the RAID volume, clck ‘Yes’.
The  Intel(R)  Storage  Utlty  wll  be  launched.  Rght-clck  the  new  hard  drve  and 
select ‘Rebuld to ths Dsk’. The ‘Rebuld Wzard’ wll be launched whch wll gude 
you through the process of rebuldng to the new hard drve.5.
6.
7.