MSI X58 Proe Manual

Overclockng Center▍MS-7522

B-7
Overclockng Center▍MS-7522

In  each  settng  menu,  you  can  select  desred  values  for  manual  overclockng.  Smply 
clck the rght sde of the button whch arranges an arrow sgn, and a drop-down menu 
wll appear below the button, then select a value.
Clck  the  arrow  sgn and  the  drop-down 
menu wll appear.
In  the  “System  Warnng”  block,  you  can  set  the  maxmum  CPU/  system...

B-8
Overclockng Center▍MS-7522
After you adjust the values n settng menu, you can save t for future use.
Clck  the  Save  button,  and  enter  a  name n 
the empty box. Then, clck Save button agan 
to save the settngs.
Important
It provdes you to save up to 20 user settngs. 
Clck the Load button and choose a saved user settng to load the settngs for the sys-tem.
Clck  the  Load  button,  and 
choose a saved user settng....

C-C-1
Ths  appendx  wll  assst  users 
n  configurng  and  en
-
ablng RAID functonalty on platforms
Appendx C
Intel ICH10R SATA 
RAID 

C-2
Intel ICH10R SATA RAID▍MS-7522
Intel ICH10R SATA RAID▍MS-7522

introduction
The ICH10R provdes a hybrd soluton that combnes 6 ndependent SATAII ports for 
support of up to 6 Seral ATAII (Seral ATAII RAID) drves.
Seral  ATAII  (SATAII)  s  the  latest  generaton  of  the  ATA  nterface.  SATA  hard  drves 
delver blsterng transfer speeds up to 3 Gb/s. Seral ATA uses long, thn cables, mak
-
ng  t...

Intel ICH10R SATA RAID▍MS-7522

C-3
Intel ICH10R SATA RAID▍MS-7522

bioS configuration
The  Intel  Matrx  Storage  Manager  Opton  ROM  should  be ntegrated  wth  the  system 
BIOS on all motherboards wth a supported Intel chpset. The Intel Matrx Stroage Man-
ager  Opton  ROM  s  the  Intel  RAID mplementaton  and  provdes  BIOS  and  DOS  dsk 
servces. Please use  +  keys to enter the “Intel
® RAID for Seral ATA” status 
screen,...

C-4
Intel ICH10R SATA RAID▍MS-7522
Intel ICH10R SATA RAID▍MS-7522

After  pressng  the    and    keys  smultaneously,  the  followng  wndow  wll  ap-pear:
Create RAID Volume Select opton 1 Create RAID Volume” and press  key. The followng screen 
appears. Then  n the Name field, specfy a RAID Volume name and then press the 
 or  key to go to the next field.
Use  the  arrow  keys  to  select  the  RAID  level  best  suted  to  your  usage  model  n...

Intel ICH10R SATA RAID▍MS-7522

C-5
Intel ICH10R SATA RAID▍MS-7522

In the Dsk field, press  key and the followng screen appears. Use  
key to select the dsks you want to create for the RAID volume, then clck  
key to finsh selecton.3.
Then  select  the  strp  value  for  the  RAID  array  by  usng  the  “upper  arrow”  or 
“down  arrow”  keys  to  scroll  through  the  avalable  values,  and  pressng  the 
  key  to  select  and  advance  to  the  next...

C-6
Intel ICH10R SATA RAID▍MS-7522
Intel ICH10R SATA RAID▍MS-7522

Important
Snce you want to create two volumes (Intel Matrx RAID Technology), ths default sze (maxmum)  needs  to  be  reduced.  Type  n  a  new  sze  for  the  first  volume.  As  an  ex-
ample:  f you want the first volume to span the first half of the two dsks, re-type the sze 
to be half of what  s shown by default. The second volume, when created, wll automat
-
cally...

Intel ICH10R SATA RAID▍MS-7522

C-7
Intel ICH10R SATA RAID▍MS-7522

Delete RAID Volume 
Here  you  can  delete  the  RAID  volume,  but  please  be  noted  that  all  data  on  RAID 
drves wll be lost. 
■
Important 
If your system currently boots to RAID and you delete the RAID volume n the Intel RAID 
Opton ROM, your system wll become unbootable.
Select opton 2 Delete RAID Volume  from the man menu wndow and press  
key  to  select  a  RAID  volume  for...

C-8
Intel ICH10R SATA RAID▍MS-7522
Intel ICH10R SATA RAID▍MS-7522

Reset Dsks to Non-RAID 
Select  opton  3  Reset  Dsks  to  Non-RAID  and  press    to  delete  the  RAID 
volume and remove any RAID structures from the drves. The followng screen  
appears:
■
Press  key to accept the selecton.
Important
You wll lose all data on the RAID drves and any nternal RAID structures when you 
perform ths operaton.
Possble reasons to “Reset Dsks to...