MSI X 370 User Manual

							
 
2-19
Introductions  
Bottom Side View    
   
 
 
 
 
 1.  Battery Lock/ Unlock Button  Battery cannot be moved when the button is positioned on lock status. Once the button is slid to 
unlock position, the battery is removable. 
 
2. Battery Pack 
This notebook will be powered by the battery pack when the AC adapter is disconnected. 
 
3. Battery Release Button 
It is a bounce-back device as a preparation for releasing the battery pack. Slide it with one hand 
and pull the battery pack carefully with the other. 
1.  Battery Lock/ Unlock Button 
2. Battery Pack 
3. Battery Release Button  
4. Ventilator 
1
2
3
4
4 
						

							
 
2-20
Introductions  
4. Ventilator  The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 
   
						

							
 
 
 
 
 
 
 
 
CHAPTER 3 
Getting Started 
 
 
 
 
   
						

							
 
3-2
Getting Started  
Power Management   Connecting the AC power It is strongly recommended to connect the AC/DC adapter to the notebook and use the AC power 
while using this notebook for the first time.  When the AC power is connected, recharging the 
battery will start immediately.     
Note that the AC/DC adapter included in the package is approved for your notebook; using other 
adapter model may damage either the notebook or other devices attached to it. 
 
Do not cover the AC/DC adapter since it may produce a certain heat while in use.    Always be 
aware of heat coming from the AC/DC adapter in use. 
 
 
 
 
 
 
 
 
 
  
						

							
 
3-3
Getting Started  
Connecting the AC Power
 
1.  Unpack the package to find the AC/DC adapter and power cord. 
2.  Attach the power cord to the connector of the AC/DC adapter.  3.  Plug the DC end of the adapter to the notebook, and the male end of the power cord to the  electrical outlet. Disconnecting the AC Power
 
When you disconnect the AC/DC adapter, you should: 4.  Unplug the power cord from the electrical outlet first. 
5.  Unplug the connector from the notebook. 
6.  Disconnect the power cord and the connector of AC/DC adapter. 
7.  When unplugging the power cord, always hold the connector part of the cord. Never pull the  cord directly! 
 
 
 
 
 
 
 
 
  
 
2 
3
3
6
4
6 
						

							
 
3-4
Getting Started  
Using the Battery Power This notebook is equipped with a high-capacity Li-ion battery pack. The rechargeable Li-ion battery 
pack is an internal power source of the notebook. 
 
Be aware of that this battery pack may be damaged if users try to disassemble the battery pack on 
their own.    Also, note that the limited warranty to the battery pack may also lose its efficacy when 
this battery pack is disassembled not by an authorized machinist. 
 
To prevent explosion caused by improper battery replacement, use the same or equivalent type of 
battery recommended by the manufacturer only. 
 
Always keep the battery which is not in use in a safe place. 
 
Please follow your local laws and regulations to recycle the unused battery pack. 
 
 
 
 
 
  
						

							
 
3-5
Getting Started  
Releasing the Battery Pack
 
It is always recommended to have another battery in reserve for enough power supply.    Please 
contact your local dealer to buy a battery pack that is compliant to your notebook.    To remove the 
battery pack, following the steps below:   
  1.  Make sure the notebook is turned off, and 
the AC power is disconnected. 
 
2.  Press the lock/unlock button to the unlocked  position. 
 
3.  Locate the battery release button on the  bottom side. 
  4.  Push and hold the release button to the  battery releasing direction as shown on 
the bottom side. 
 
5.  Carefully slide out the battery pack a bit to  the location with “open” mark. 
  6.  Take the battery pack out of the battery tray. 
 
2 3 
5
4 
6 
						

							
 
3-6
Getting Started  
Replacing the Battery Pack
 
To insert the battery pack, following the steps below: 
  1.  Align the front edge of the battery  pack to the location with “open” 
mark shown aside the battery tray 
 
2.  Place the battery pack into the  battery tray vertically with correct 
orientation. 
 
 
3.  Fasten the battery pack by 
pressing it forward to the “Lock” 
position 
 
 
  4.  Press the lock/unlock button to  the Lock position to make sure 
the battery pack is securely 
fastened. 
 
3
2 
1
4  
						

							
 
3-7
Getting Started  
Battery Safety Tips
 
Replacing or handling the battery incorrectly may present a risk of fire or explosion, which could 
cause serious injury.  Š  Only replace the main battery pack with the same or equivalent type of battery. 
Š   Do not disassemble, short-circuit or incinerate batteries or store them to temperatures above 
+60° C (+140° F). 
Š   Do not temper with batteries.    Keep away from the reach of children. 
Š   Do not use rusty or damaged batteries. 
Š   Dispose of batteries according to local regulations.  Check with your local solid waste 
officials for details about recycling options or for proper disposal in your area.  
Conserving Battery Power
 
Efficient battery power is critical to maintain a normal operation.  If the battery power is not 
managed well, the saved data and customized settings may be lost. 
To optimize battery life and avoid a sudden power loss, read the tips below:  Š  Suspend system operation if the system will be idle for a while or shorten the suspend timer’s 
time period. 
Š   Turn off the system if you won’t be using it for a period of time. 
Š   Disable unnecessary settings or remove idle peripherals. 
Š   Connect an AC/DC adapter to the system whenever possible. 
  
						

							
 
3-8
Getting Started  
Charging the Battery Pack
 
The battery pack can be recharged while it is installed in the notebook.    Please pay attention to the 
following tips before recharging the battery:  Š  If a charged battery pack is not available, save your work and close all running programs and 
shut down the system or Save-to-Disk. 
Š   Plug in an external AC/DC adapter. 
Š   You can use the system, suspend system operation or shut down and turn off the system 
without interrupting the charging process. 
Š   The battery pack uses Lithium-ion battery cells that have no “memory effect.”  It is 
unnecessary to discharge the battery before recharging.    However, to optimize the life of 
battery, we suggest that consuming the battery power completely once a month is necessary. 
Š   If you do not use the notebook for a long time, it is suggested to remove the battery pack from 
your notebook.    This may be helpful to extend your battery life. 
Š   The actual charging time will be determined by the applications in use.