MSI X 370 User Manual

							
 
2-9
Introductions  
1.  Webcam/ Webcam LED    Š  This built-in Webcam can be used for picture taking, video recoding or conferencing, and 
any other interactive applications.   
Š   Webcam LED indicator, next to the webcam, grows white when webcam function is 
activated; LED goes out when this function is turned off. 
 
2.  Power Button / Power LED 
 
Š   Press the power button to turn the notebook power ON and OFF.   
Š   Glowing white when the notebook power is turned on. 
 
3. Keyboard  The built-in keyboard provides all the functions of a full-sized keyboard.     
Quick Launch [Fn] Buttons 
Press the quick launch touch sensor to activate the specific applications or tools.     
With the help of these quick launch buttons, users will be able to do work more efficiently.
 
 + 
User Defined  Š
  Press and hold the  Fn button, and then press the  F4 button to 
launch the User Defined application.  
						

							
 
2-10
Introductions  
 
 + 
ECO Engine 
(Power Saving)  Š
  Press and hold the  Fn button, and then press the  F5 button 
repeatedly to switch among various power saving modes provided 
by  ECO Engine , or to turn this function off recurrently. 
Š   Refer to the Power Management section in chapter 3 of this 
manual for the detailed information of this ECO Engine, Power 
Saving Function. 
Š   Note that ECO Engine is an optional function. 
 + Webcam  Š
  Press and hold the  Fn button, and then press the  F6 button to turn 
the  Webcam  function on.    Press again to turn it off.  + 
WirelessLAN  Š
  Press and hold the  Fn button, and then press the  F8 button 
repeatedly to turn the  Wireless LAN   function on or off 
recurrently.  
 + 
Bluetooth   (optional)  Š
  Press and hold the  Fn button, and then press the  F9 button to turn 
the  Bluetooth  function on.    Press again to turn it off.   
 
  
						

							
 
2-11
Introductions  
4. Touchpad  This is the pointing device of the notebook. 
 
5. Internal Microphone  There is built-in microphone and its function is the same with microphone. 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							
 
2-12
Introductions  
Front Side View
    
 
 
     
1. Status LED 
 
Bluetooth 
(optional)
 
Bluetooth  Š   Bluetooth LED indicator glows white when Bluetooth function is 
enabled.  
Š   Note:  The Bluetooth Function may be optionally supported depending 
on the model users purchased.  
Š   Warning:  For flight safety consideration, make sure this LED indicator 
goes out when you are in flight.  
Š   Contact the local distributor for further information if necessary.  
 
Wireless LAN Wireless LAN 
 
Š   Glowing white when wireless LAN function is enabled.   
Š   LED indicator goes out when this function is disabled. 
Š   Warning:  For flight safety consideration, make sure this LED indicator 
goes out when you are in flight.     
Š   Contact the local distributor for further information if necessary.  
 
1. Status LED 
1 
						

							
 
2-13
Introductions  
 
Sleep State:  
Š   Blinking white when the system is in Sleep state. 
Š   Glowing white when the system is activated.     
Š   LED goes out when the system is turned off. 
 
Battery Status 
Š   Glowing white when the battery is being charged.   
Š   Glowing amber when the battery is in low battery status.   
Š   Blinking amber if the battery fails and it is recommended to replace a 
new battery. Consult the local dealer for purchasing an equivalent type 
of battery recommended by the manufacturer. 
Š   Battery LED goes out when it is fully charged or when the AC/DC 
adapter is disconnected. 
 
Hard Disk/ Optical Drive Device In-use (optional):   
Blinking white when the system is accessing the hard disk drive or the 
optical drive device. 
 
Num Lock:  Glowing white when the Num Lock function is activated. 
 
Caps Lock:  Glowing white when the Caps Lock function is activated. 
 
Scroll Lock:  Glowing white when the Scroll Lock function is activated.  
  
						

							
 
2-14
Introductions  
Left Side View     
   
 
 
   
1. HDMI Connector  HDMI (High Definition Multimedia Interface) is a new interface standard for PCs, displays and 
consumer electronics devices that supports standard, enhanced and high-definition video, plus 
multi-channel digital audio on a single cable. 
 
2. RJ-45 Connector  The Ethernet connector is used to connect a LAN cable for network connection. 
 
3. VGA Port  The 15-pin-D-sub VGA port allows you to connect an external monitor or other standard 
VGA-compatible device (such as a projector) for a great view of the computer display. 
 
 
 
1. HDMI Connector 
2. RJ-45 Connector  
3. VGA Port 
4. Card Reader 
 
3
2
1
4 
						

							
 
2-15
Introductions  
4. Card Reader   The built-in card reader may support various types of memory card, such as MMC (Multi-Media 
Card), SD (Secure Digital), SDHC (SD High Capacity), or SDXC(extended Capacity)cards. 
Contact the local dealer for further and correct information and be noted that  the supported 
memory cards may vary without notice.
 
 
 
 
 
 
 
 
 
 
 
  
						

							
 
2-16
Introductions  
Right Side View          
  
 
   
1. USB Port The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse, 
keyboard, modem, portable hard disk module, printer and more. 
 
2. Audio Port Connectors   Make high quality sound blaster with stereo system and Hi-Fi function supported.   
Mic-in:  Used for an external microphone.  
Line In:  Used for an external audio device.  
 
 
 
Headphone-out:  A connector for speakers or headphones. 
 
 
 
1. USB Port 
2.  Audio Port Connectors 
3. Power Connector  
3
2
1 
						

							
 
2-17
Introductions  
3. Power Connector  To connect the AC adapter and supply power for the notebook. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							
 
2-18
Introductions  
Rear Side View    
 
  1. Battery Pack  
This notebook will be powered by the battery pack when the AC adapter is disconnected.   
 
 
 
 
 
 
 
 
 
1. Battery Pack 
1