MSI Router RG54G3 User Manual

 
56  1.Enable DHCP server. 
2.WAN setting: static IP address. 
3.LAN IP address: 192.168.1.254/24. 
4.Set RADIUS server IP. 
5.Set RADIUS server shared key. 
6.Configure WEP key and 802.1X setting. 
  The following test will use the inbuilt 802.1X authentication method such as ,EAP_TLS, 
PEAP_CHAPv2(Windows XP with SP1 only), and PEAP_TLS(Windows XP with SP1 only) using the Smart 
Card or other Certificate of the Windows XP Professional. 
 
3. DUT and Windows 2000 Radius Server Setup  3-1-1.  Setup...

 
57     4. We will change EAP type to fit the variable test condition. 
 
Figure 2: Enable IEEE 802.1X access control  

 
58   
Figure 3: Smart card or certificate properties   
4. Windows 2000 RADIUS server Authentication testing:   
4.1DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.) 
1. Download and install the certificate on PC1. (Fig 4) 
2. PC1 choose the SSID of DUT as the Access Point. 
3. Set authentication type of wireless client and RADIUS server both to  EAP_TLS. 
4. Disable the wireless connection and enable again. 
5. The DUT will send the users certificate to the RADIUS server,...

 
59    
Figure 4: Certificate information on PC1 
   
Figure 5: Authenticating   
 
 
 
 
  

 
60    
Figure 6: Authentication success 
 
4.2DUT authenticate PC2 using PEAP-TLS. 
1. PC2 choose the SSID of DUT as the Access Point. 
2. Set authentication type of wireless client and RADIUS server both to  PEAP_TLS. 
3. Disable the wireless connection and enable again. 
4.The DUT will send the users certificate to the RADIUS server, and then  send the message of authentication result to PC2. 
5. Windows XP will prompt that the authentication process is success or fail   and end the authentication...

 
61   
A
A
A p
p
p p
p
p e
e
e n
n
n d
d
d i
i
i x
x
x  
 
  C
C
C  
 
   
 
  W
W
W P
P
P A
A
A -
-
- P
P
P S
S
S K
K
K  
 
  a
a
a n
n
n d
d
d  
 
  W
W
W P
P
P A
A
A  
 
 
   
 
Wireless Router: LAN IP: 192.168.123.254 
             WAN IP: 192.168.122.216 
Radius Server: 192.168.122.1 
UserA : XP Wireless Card:Ti-11g 
Tool: Odyssey Client Manager 
Refer to:  www.funk.com   
Download:  http://www.funk.com/News&Events/ody_c_wpa_preview_pn.asp  
    

 
62   
Or Another Configuration:
 
    
WPA-PSK 
 
In fact, it is not necessary for this function to authenticate by Radius Server, the client and 
wireless Router authenticate by themselves. 
 
Method1: 
1. Go to the Web manager of Wireless Router to configure, like below: 
    
 
2. Go to Odyssey Client Manager, first choose  “Network ” 
 Before doing that, you should verify if the software can show the wireless card. 
 Open  “Adapters ”    

 
63     
 
3. Add and edit some settings: 
    

 
64  4. Back to Connection: 
 Then Select 
“Connect to network ” You will see:   
 
Method2: 
1. First, patch windows XP and have to install  “Service package 1 ” 
Patch: 
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=5039ef4a-61e0 -4c44-94f0-c25c9de0ace9  
2. Then reboot. 
3. Setting on the router and client: 
 Router:   
 
 
 
 
Client: 
Go to  “Network Connection ” and select wireless adapter.  

 
65  Choose 
“View available Wireless Networks ” like below: 
Advanced à choose  “1kk ”