MSI Router RG54G3 User Manual

 
36  After configure Rule 1
à 
   
 
Schedule Enable 
Selected if you want to Enable the Scheduler.  
Edit  
To edit the schedule rule.  
Delete  
To delete the schedule rule, and the rule# of the rules behind the deleted one will decrease one automatically. 
Schedule Rule can be apply to Virtual server and Packet Filter, for example:  

 
37  Exanple1: 
Virtual Server  –  Apply Rule#1 (ftp time: everyday 14:10 to 16:20)    
Exanple2:  Packet Filter  –  Apply Rule#1 (ftp time: everyday 14:10 to 16:20).    

 
38  4.4.8 Virtual Server 
 
This product ’s NAT firewall filters out unrecognized packets to protect your Intranet, so all hosts behind this product 
are invisible to the outside world. If you wish, you can make some of them accessible by enabling the Virtual Server 
Mapping. 
A virtual server is defined as a  Service Port, and all requests to this port will be redirected to the computer specified 
by the  Server IP .  Virtual Server  can work with Scheduling Rules , and give user more flexibility on...

 
39  4.4.9 DMZ 
 
 
 
IP Address of DMZ Host 
DMZ (DeMilitarized Zone) Host is a host without the protection of firewall. It allows a computer to be exposed to 
unrestricted 2-way communication for Internet games, Video conferencing, Internet telephony and other special 
applications.  
NOTE: This feature should be used only when needed.  
Non-standard FTP port 
You have to configure this item if you want to access an FTP server whose port number is not 21. This setting will be 
lost after rebooting....

 
40  4.4.10 Special AP 
 
 
 
Some applications require multiple connections, like Internet games, Video conferencing, Internet telephony, etc. 
Because of the firewall function, these applications cannot work with a pure NAT router. The  Special Applications 
feature allows some of these applications to work with this product. If the mechanism of Special Applications fails to 
make an application work, try setting your computer as the  DMZ host instead. 
1.   Trigger : the outbound port number issued...

 
41  4.5 Administration  
 
 
4.5.1 Change Password   
You can change Password here. We  strongly recommend you to change the system password for security reason.  

 
42  4.5.2 Firmware Upgrade 
 
 
 
You can upgrade firmware by clicking  Firmware Upgrade button. 
 
4.5.3 Backup Setting   
You can backup your settings by clicking the  Backup Setting button and save it as a bin file. Once you want to 
restore these settings, please click  Firmware Upgrade button and use the bin file you saved.  

 
43  4.5.4 Reset to factory default 
 
 
You can also reset this product to factory default by clicking the  Reset to default button. 
 
4.5.5 Reboot   
You can also reboot this product by clicking the  Reboot button. 
 
4.5.6 System Time    

 
44  Get Date and Time by NTP Protocol 
Selected if you want to Get Date and Time by NTP Protocol.  
Time Server 
Select a NTP time server to consult UTC time  
Time Zone 
Select a time zone where this device locates.  
Set Date and Time manually 
Selected if you want to Set Date and Time manually.  
Set Date and Time manually 
Selected if you want to Set Date and Time manually. 
Function of Buttons 
Sync Now:
 Synchronize system time with network time server 
Daylight Saving: Set up where the location...

 
45  perform remote administration. If the specified IP address is 0.0.0.0, any host can connect to this product to perform 
administration task. You can use subnet mask bits /nn notation to specified a group of trusted IP addresses. For 
example, 10.1.2.0/24.  
NOTE: When Remote Administration is enabled, the web server port will be shifted to 88. You can change web 
server port to other port, too. 
Administrator Time-out 
The time of no activity to logout automatically. Set it to zero to disable this...