MSI K8n Sli H Manual

							MSI FeatureMS-7100 ATX Mainboard
4-2Before using this utility, it is required to have all the integrated peripherals/cards (LAN
card, Wireless LAN card, MegaStick... etc.) and all the necessary drivers (onboard
LAN driver, audio driver, CoreCenter, Live Update... etc.) installed correctly.
The icon representing each item will be lit up if it is inserted/installed correctly and
properly. Otherwise, the icon will remain gray and user is not able to view the
functionality/connection of that item.Main
Introduction:
Click on each icon appearing above to enter the sub-menu to make further configuration.
MSIClick on this button to link to MSI website:
http://www.msi.com.tw.
Quick GuideClick on this button and the quick guide of DigiCell will be displayed for you
to review.
H/W DiagnosticIn this sub-menu, it provides the information of each DigiCell button for you to
check if the representing peripherals/cards/drivers are correctly installed.
Comm.In this sub-menu, you can see the configuration details for communication
products, including the status, strength, speed and channel of the connec-
tion of the Ethernet LAN & Wireless LAN.
Software Access PointIn this sub-menu, you can change your connection mode to different ones,
and configure the advanced settings for each mode, such as the authentica-
tion encryption... etc. 
						

							Introduction to DigiCell4-3Live UpdateYou can take advantage of  Live Update to detect and update BIOS and
drivers online.
Core CenterYou can take advantage of  Core Center to monitor the health status of your
system and to overclock under Windows OS if your system supports
overclocking function.
MEGA STICKIf you have your MEGA STICK connected to your system, this icon will be lit
up.  Click this blue icon to turn DigiCell into a MP3 player, and then you can load
media files from your MEGA STICK or the system, and edit the preferred
playlist.
Audio Speaker SettingIn this sub-menu, you can configure and test the multi-channel audio function,
speakers, sound effect and environment.
Power on AgentIn this sub-menu, you can configure date, time and auto-executed programs
of the power-on, power-off and restarting features.MSI Reminds You...
Click on back button in every sub-menu and it will bring you back to the
main menu. 
						

							MSI FeatureMS-7100 ATX Mainboard
4-4H/W DiagnosticIn the H/W Diagnostic sub-menu, you can see the information, status and note of
each DigiCell. You may double check the connection and installation of the item
marked as gray.
You may also click on the Mail to MSI button to send your questions or suggestions
to MSI’s technical support staff. 
						

							Introduction to DigiCell4-5Communication
In the Communication sub-menu, you can see the status of all the LAN / WLAN /
Bluetooth on the screen if the hardware is installed. The first icon indicates the
onboard LAN on your system, the second icon indicates the wireless LAN status,
and the third one is the information about the bluetooth on your system.  Click on each
item for details.
This icon indicates the information and connection status of onboard LAN,
which is read-only.
The second icon indicates the wireless connection. You may click this icon
to configure the advanced settings in the WLAN Card Mode dialogue box
(see the image on p.4-8). Please note that it is only available when the
Software Access Point is set to WLAN Card Mode.
The third icon indicates the connection using bluetooth devices. If your
system has connected to the bluetooth device, the icon will light up. 
						

							MSI FeatureMS-7100 ATX Mainboard
4-6Software Access Point
In the Software Access Point sub-menu, you can see the status of communicating
on your system and choose the desired software access point mode by clicking on
the desired icon, in which the default settings are configured for your usage. The
default software access point mode is set to WLAN Card Mode. For more ad-
vanced security settings and channels switching, click on “Setting” button to enter
its sub-menu.
Terminology
Here are the introduction of WLAN / AP communication terminology.
WEP KeyIn the wireless network environment, the administrator can set up password
(Network Key) to protect the network from being attacked or unauthorized
access. When building the network, you can set up 4 sets of WEP keys,
which can be 5 characters (10 hex-adecimal digital) or 13 characters (26
hex-adecimal digital) and specify one of them to use.
Ad-hoc ModeAn Ad-hoc network is a local area network or other small network, especially
one with wireless or temporary plug-in connections, in which some of the
network devices are part of the network only for the duration of a communi-
cations session. Users in the network can share files, print to a shared
printer, and access the Internet with a shared modem. In this kind of network,
new devices can be quickly added; however, users can only communicate
with other wireless LAN computers that are in this wireless LAN workgroup,
and are within range.
Infrastructure ModeThe difference between Infrastructure network and Ad-hoc network is that
the former one includes an Access Point. In an Infrastructure network, the
Access Point can manage the bandwidth to maximize bandwidth utilization.
Additionally, the Access Point enables users on a wireless LAN to access an
existing wired network, allowing wireless users to take advantage of the
wired networks resources, such as Internet, email, file transfer, and printer
sharing. The scale and range of the Infrastructure networking are larger and
wider than that of the Ad-hoc networking. 
						

							Introduction to DigiCell4-7Access Point Mode
Click on “Setting” button of the Access Point Mode and the following screen will
display.IP Sharing
Click on this icon to enable/disable the IP sharing. The default of this setting is disabled.
Enabling/disabling IP sharing depends on the different situation. For example:
1.If your family and you are getting on Internet at home with multi computers, and
your ISP only provides one IP for you, you may need to enable IP Sharing
function in order to use this one IP to get on Internet with multi computers
simultaneously.
2.If you are getting on Internet in office, usually the LAN card will automatically get
the IP this computer uses. In this case you don’t have to enablethis function.
SSID
Means Service Set Identifier, a unique name shared among all points in a wireless
network. It must be identical for all points in the network. Then the card will be able
to connect to an access point with the same SSID.
Channel
Specifies the operating radio frequency channel in Infrastructure mode, which
should be set to an available one (ex: with less traffic to ensure the stable and better
connection).
Associated Client List
This option is to display information of stations that are currently associated to your
wireless gateway.
Association Control
This option allows you to control which PC can connect to the wireless LAN. If youDisabled.Enabled. 
						

							MSI FeatureMS-7100 ATX Mainboard
4-8WLAN Card Mode
Click on “Setting” button of the WLAN Card Mode for the WEP status of your APs.
If the AP you are selecting (the highlighted one) is not encrypted (Disabled shown in
the Encryption column), the screen will display as below. You can click “Connect”
to make connection to that AP, click “Cancel” to close this dialogue box, or click
“Refresh” button to update the available WLAN connections.
If the network you are selecting is encrypted (WEP shown in the Encryption column),
the screen will display as below. You need to enter the correct WEP key defined by
AP in the specified WEP Key 1~4 fields to make the connection.enable this feature, only PCs with MAC address located in Association Control List
can connect to the wireless LAN.
MAC Address
MAC stands for Media Access Control. A MAC address is the hardware address of
a device connected to a network.
Security
This option allows you to enable/disable the authentication function.
Authentication
Open:Communicates the key across the network.
Shared:Devices must have identical WEP settings to communicate. 
						

							Introduction to DigiCell4-9Live Update
Click on the Live Update icon in the main menu and the Live Update program will be
enabled.
The  Live Update 3™ is a tool used to detect and update your
BIOS/drivers/VGA BIOS/VGA Driver/OSD/Utility online so that you
don’t need to search for the correct BIOS/driver version through-
out the whole Web site. To use the function, you need to install the
“MSI Live Update 3” application.  After the installation, the “MSI
Live Update 3” icon (as shown on the right) will appear on the
screen.
Double click the “MSI Live Update 3” icon, and the following screen
will appear:
Five buttons are placed on the left column of the screen. Click the desired button to
start the update process.
Live BIOS – Updates the BIOS online.
Live Driver – Updates the drivers online.
Live VGA BIOS – Updates the VGA BIOS online.
Live VGA Driver – Updates the VGA driver online.
Live OSD – Updates the firmware of the OSD products online.
Live Utility – Updates the utilities online.
If the product you purchased does not support any of the functions listed above, a
“sorry” message is displayed. For more information on the update instructions, insert
the companion CD and refer to the “Live Update Guide” under the “Manual” Tab. 
						

							MSI FeatureMS-7100 ATX Mainboard
4-10MEGA STICK
In the MEGA STICK sub-menu, you can configure the settings of MSI MEGA STICK
and the media files (*.m3u, *.mp3, *.wav, *.cda, *.wma) on your system.Basic Function
Here you can edit your own play list with the buttons “load”, “save”, “delete”,
“shuffle”, “repeat” & “print”.
LoadTo load media files or the playlist of mp3 files (*.m3u) on your system or
on your MEGA STICK.
SaveTo save a loaded playlist of mp3 files (*.m3u) on your system or on
your MEGA STICK.
DeleteClick on the media files in the Play List: field and use “Delete” button
to remove the media file from the play list. You may remove multi media
files simultaneously by using “Ctrl” to select multi files.
ShuffleTo play the media file in the Play List: in a random order.
RepeatTo repeat the selected files in the Play List:.
PrintThis button has 2 functions:
1.To print out the details of current play list through your printer with
the following information:
Song title --- Song length --- Singer name
2.To save the details of current play list and save the file in the plain
text file format in the \\Program files\MSI\DigiCell\MyMusic.txt for
your reference. The MyMusic.txt file is with the following information:
Song title --- Song length --- Singer name