MSI K8n Sli H Manual

MSI FeatureMS-7100 ATX Mainboard
4-2Before using this utility, it is required to have all the integrated peripherals/cards (LAN
card, Wireless LAN card, MegaStick... etc.) and all the necessary drivers (onboard
LAN driver, audio driver, CoreCenter, Live Update... etc.) installed correctly.
The icon representing each item will be lit up if it is inserted/installed correctly and
properly. Otherwise, the icon will remain gray and user is not able to view the
functionality/connection of that item.Main...

Introduction to DigiCell4-3Live UpdateYou can take advantage of  Live Update to detect and update BIOS and
drivers online.
Core CenterYou can take advantage of  Core Center to monitor the health status of your
system and to overclock under Windows OS if your system supports
overclocking function.
MEGA STICKIf you have your MEGA STICK connected to your system, this icon will be lit
up.  Click this blue icon to turn DigiCell into a MP3 player, and then you can load
media files from your MEGA STICK or the...

MSI FeatureMS-7100 ATX Mainboard
4-4H/W DiagnosticIn the H/W Diagnostic sub-menu, you can see the information, status and note of
each DigiCell. You may double check the connection and installation of the item
marked as gray.
You may also click on the Mail to MSI button to send your questions or suggestions
to MSI’s technical support staff. 

Introduction to DigiCell4-5Communication
In the Communication sub-menu, you can see the status of all the LAN / WLAN /
Bluetooth on the screen if the hardware is installed. The first icon indicates the
onboard LAN on your system, the second icon indicates the wireless LAN status,
and the third one is the information about the bluetooth on your system.  Click on each
item for details.
This icon indicates the information and connection status of onboard LAN,
which is read-only.
The second icon indicates...

MSI FeatureMS-7100 ATX Mainboard
4-6Software Access Point
In the Software Access Point sub-menu, you can see the status of communicating
on your system and choose the desired software access point mode by clicking on
the desired icon, in which the default settings are configured for your usage. The
default software access point mode is set to WLAN Card Mode. For more ad-
vanced security settings and channels switching, click on “Setting” button to enter
its sub-menu.
Terminology
Here are the introduction...

Introduction to DigiCell4-7Access Point Mode
Click on “Setting” button of the Access Point Mode and the following screen will
display.IP Sharing
Click on this icon to enable/disable the IP sharing. The default of this setting is disabled.
Enabling/disabling IP sharing depends on the different situation. For example:
1.If your family and you are getting on Internet at home with multi computers, and
your ISP only provides one IP for you, you may need to enable IP Sharing
function in order to use this one...

MSI FeatureMS-7100 ATX Mainboard
4-8WLAN Card Mode
Click on “Setting” button of the WLAN Card Mode for the WEP status of your APs.
If the AP you are selecting (the highlighted one) is not encrypted (Disabled shown in
the Encryption column), the screen will display as below. You can click “Connect”
to make connection to that AP, click “Cancel” to close this dialogue box, or click
“Refresh” button to update the available WLAN connections.
If the network you are selecting is encrypted (WEP shown in the...

Introduction to DigiCell4-9Live Update
Click on the Live Update icon in the main menu and the Live Update program will be
enabled.
The  Live Update 3™ is a tool used to detect and update your
BIOS/drivers/VGA BIOS/VGA Driver/OSD/Utility online so that you
don’t need to search for the correct BIOS/driver version through-
out the whole Web site. To use the function, you need to install the
“MSI Live Update 3” application.  After the installation, the “MSI
Live Update 3” icon (as shown on the right) will...

MSI FeatureMS-7100 ATX Mainboard
4-10MEGA STICK
In the MEGA STICK sub-menu, you can configure the settings of MSI MEGA STICK
and the media files (*.m3u, *.mp3, *.wav, *.cda, *.wma) on your system.Basic Function
Here you can edit your own play list with the buttons “load”, “save”, “delete”,
“shuffle”, “repeat” & “print”.
LoadTo load media files or the playlist of mp3 files (*.m3u) on your system or
on your MEGA STICK.
SaveTo save a loaded playlist of mp3 files (*.m3u) on your system or on
your MEGA...