MSI Hetis 865gv-e Manual

5-3Using Audio Function3.Click Next to start installing files into the system.
4.Click Finish to restart the system.Select this
option 

5-4 Chapter 5Using the Back Panel
In addition to a default 2-channel analog audio output function, the audio
connectors on the Back Panel also provide 4- or 6-channel analog audio output
function if a proper setting is made in the software utility.
Read the following steps to have the Multi-Channel Audio Function
properly set in the software utility, and have your speakers correctly con-
nected to the Back Panel.
Configuration in the Software Utility1.Click the audio icon  from the window tray at the...

5-5Using Audio Function2 345
6 

5-6 Chapter 5
Connecting the SpeakersWhen you have set the Multi-Channel Audio Function mode properly in
the software utility, connect your speakers to the correct phone jacks in
accordance with the setting in software utility.
n 2-Channel Mode for Stereo-Speaker Output
Refer to the following diagram and caption for the function of each
phone jack on the back panel when 2-Channel Mode is selected.1MIC2Line In3Line Out (Front channels)Back  Panel3121MIC2 *Line Out (Rear channels)3Line Out (Front...

5-7Using Audio Function3121Line Out (Center and
Subwoofer channel)2 *Line Out (Rear channels)3 *Line Out (Front channels)
* Both Line In and MIC function
are converted to Line Out function
when 4-Channel Mode for 6-Speaker
Output is selected. n 6-Channel Mode for 6-Speaker Output
Refer to the following diagram and caption for the function of each
jack on the back panel when 6-Channel Mode is selected.Back  Panel
If  the Center and Subwoofer speaker exchange their audio
channels when you play video or...

5-8 Chapter 5To ensure that 4- or 6-channel audio operation works properly, you may
need to test each connected speaker to make sure every speaker work properly.
If any speaker fails to make sound, then check whether the cable is inserted
firmly to the connector or replace the bad speakers with good ones.
Testing Each Speaker
1.Click the audio icon  from the window tray at the lower-right corner of
the screen.
2.Click the Speaker Test tab.
3.The following window appears.  Select the speaker which you...

5-9Using Audio Function4.The tested speaker will show in bright color.
5.While you are testing the speakers in 6-Channel Mode, if the sound coming
from the center speaker and subwoofer is swapped, you should select
Swap Center/Subwoofer Output to readjust these two channels.Select this functiontested speaker 

5-10 Chapter 5The KaraOK function will automatically remove human voice (lyrics)
and leave melody for you to sing the song.  Note that this function applies
only for 2-channel audio operation.
Playing KaraOK
1.Click the audio icon  from the window tray at the lower-right corner of
the screen.
2.In the Sound Effect tab, select Voice Cancellation under “KaraOK.”
3.Click OK to close this window.2
35.4 Playing KaraOK