Motorola Vip 1910 9 Manual

 
 
 
 
  
viaTV_STBmanual_M1910_EN.doc Page 11 (Total 38) 
 
5.5  Sound and subtitles  
Depending on the set-top box model, you may be asked to set the initial language for the broadcasted TV 
programs – sound and subtitles. The prerequisite is that the program is broadcast in two (or more) 
languages. The languages and subtitles may be easily set up for every program – the yellow 
button refers to sound, the blue one to subtitles.  More information on the subject is provided at the 
end of the manual...

 
 
 
 
  
viaTV_STBmanual_M1910_EN.doc Page 12 (Total 38) 
 
The initial screen of the Portal (original design):  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The initial screen of the Portal (new design):
  
  

 
 
 
 
  
viaTV_STBmanual_M1910_EN.doc Page 13 (Total 38) 
 
7  Map of the Portal (original design) 
The entire contents of the Portal, including submenus and an outline of the logic where you can get by 
clicking, looks as follows:  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
7.1  The meaning of the individual items:  
7.1.1 Television  
Activates the EPG (Electronic program Guide). The EPG serves as an advanced teletext as far as 
information on the programs is concerned. Within the scope of approx. one...

 
 
 
 
  
viaTV_STBmanual_M1910_EN.doc Page 14 (Total 38) 
 
 
Complete EPG looks as follows (a vertical EPG) 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Or as follows (a horizontal EPG):  
 
day channel 
program 
a hint what can be controlled by the color buttons  

 
 
 
 
  
viaTV_STBmanual_M1910_EN.doc Page 15 (Total 38) 
 
The program of the TV channel, which you are watching, is displayed as the initial one with respect to the 
actual time.  
 
Operation of the full EPG is as follows:  
 PAN buttons (arrows) left / right – switching between days (can be seen at the very top)  
 Cursor keys (arrows) left / right –  switching between channels (can be seen under it); only in the 
vertical display form  
 Cursor and PAN buttons (arrows) left / right  – shift in...

 
 
 
 
  
viaTV_STBmanual_M1910_EN.doc Page 16 (Total 38) 
 
This section serves only to play recorded content. For recording, press the red button 
during a program or use the Enhanced TV menu. 
7.1.4 Games 
Tetris, Solitaire 
These concern popular easy games known from 
computers. The instructions are provided directly on  
the screen.  
7.1.5 Radio 
Activates the EPG (Electronic program Guide) for radio 
stations. However, no EPG data for radio is available. 
7.1.6 Settings 
Various settings and...

 
 
 
 
  
viaTV_STBmanual_M1910_EN.doc Page 17 (Total 38) 
 
 
To order a package press the green button and then enter the purchase PIN. 
 
To cancel your package, proceed analogically. Remember that when ordered, the some 
packages must be active for at least one month. It is not possible to cancel it earlier. 
Newly ordered channels should appear in the list immediately and their content should be 
available within approximately 15 minutes. 
TV channels offered in Self-Care cannot be ordered or...

 
 
 
 
  
viaTV_STBmanual_M1910_EN.doc Page 18 (Total 38) 
 
 STB settings  
Various set-top box settings: 
o STB information 
Displays basic information on the set-top box – its serial number, IP and MAC address, 
etc. For the purpose of the standard operation, it is not relevant for a common user.  
o Video output setup (scart connector only) 
This item sets the video output for the scart connector, see the figure. In the left part, the 
output format is to be set, in the right part, the TV standard....

 
 
 
 
  
viaTV_STBmanual_M1910_EN.doc Page 19 (Total 38) 
 
On the left, you select the actual type of your television set (the screen format) either  
the classical square-like 4:3 or the wide rectangular-like 16:9. 
  
On the right, you select customization of the picture if the program is broadcast in another 
that the actual definition (e.g. if you have the 4:3 television set and the program (typically 
a film) is broadcast as 16:9 and vice versa).  
 
For the 4:3 television sets, your...

 
 
 
 
  
viaTV_STBmanual_M1910_EN.doc Page 20 (Total 38) 
 
8.1.2 Pause playback 
Pauses playback of the current program, for example 
if you need to leave the TV. To continue playback, 
enter the Enhanced TV menu again and use the 
Unpause playback button, which is now displayed 
instead of the Pause playback button. Select the 
button and confirm with OK. Playback will start from 
where it was paused (delayed). To return to the real-
time broadcast (live) use the back to live broadcast 
button....