Motorola S10 Manual

Quick Start Guide
MOTOROLAS10-HD 

Congratulations
1
CongratulationsYour MOTOROLA S10-HD Stereo Bluetooth® 
Headphones take music to the next level.
We’ve crammed all of the main features of 
your headphones into this handy guide, and in 
a matter of minutes we’ll show you just how 
easy your headphones are to use.
So go on, check it out.
More information
On the web: www.motorola.com/supportCaution: Before using your headset for the 
first time, please read the important  Safety, 
Regulatory & Legal  information at the back 
of this guide. 

Your headphones
2Your headphonesthe important parts
Microphone
Õ\ForwardÔBack
Play/P ause
9Volume Up
Ear Speakers
CallÏVolume Down
MicroUSB
Charging
Port
(on back)
  Power  and Status Light
(underneath back) 

Charge it
3
Charge itlet’s get you up and running
While your headphones are charging, you 
won’t be able to use them.
After charging, be sure to close the flap that 
covers your charging port.
Note: Your battery is designed to last the life of 
your product. It should only be removed by a 
recycling facility. Any attempt to remove or 
replace your battery will damage your 
headphones.
Status Light Red = charging
Blue = fully charged 

Basics
4Basicsa few essentials to get you startedTu r n  o n  &  o f f
Wear  itUse both hands to 
gently rotate the 
headphones over your 
head, place ear hooks 
over your ears, and 
insert the speakers into 
your ears for a snug fit.
 Power 
Press and hold to turn on/off. 

Basics
5
When fitted properly, the back of your 
headphones normally “float” over your neck.
Tip:  Try out all the supplied ear cushions to get 
a comfortable fit and optimal performance. 

Pair & conne ct
6Pair & connectconnect and goPair & connect with your phone  1 Turn off any Bluetooth devices previously 
paired with your headphones.
2 Turn on the Bluetooth feature on your 
phone.
3 Turn on your headphones (see “Turn on & 
off” on page 4).
The status light becomes steadily lit in blue.
Note: When prompted fo r the passkey, 
enter  0000.
When connected, you see the status light 
rapidly flash in blue and red.
For daily use, make sure your headphones are 
turned on, and your phone’s...

Pair & conne ct
7
Test your connection  1 Ensure your headphones are turned on.
2 Play music on your phone.
If connected for music, you hear it on the 
headphones.
3 Dial a phone number and press the  Call/
Send  key.
If connected for calls, you hear ringing on 
the headphones.
Note: To pair your headphones again, press 
and hold the   (power) key until the status 
light becomes steadily lit in blue. 

Listen to music
8Listen to musicwhen music is what you need
Note: Some features are phone/network 
dependent.Control your tunesUse the music buttons on your headphones to 
control music playback.To . . .
play music Press 
Å.
pause/resume 
music Press Å.
go to next song Press Ä.
fast-for ward song Press and hold 
Ä.
rewind song Press and hold Ã.
go to previous song Press 
Ã.
stop music Press and hold 
Å.