Motorola Micom 2 Manual
Have a look at the manual Motorola Micom 2 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
Programming the Radio
43
Alternate Display Time-out (ADT)
This menu sets the time-out time of the menu display. You define the
number of seconds that elapse before the display returns to the
previous screen.
To set the time-out time:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[PRMT].
3.Pressto scroll to the ADT option.
4.Press[ADT].
5.Press
Press
Press
Press[] to increment the displayed value by 1.
[1], to quick-set the value to 1.
[10], to quick-set the value to 10.
6.Press
to...](http://img.usermanuals.tech/thumb/52/104703/w64_micom-2-manual-1524735781_d-65.png "Page 66
Programming the Radio
43
Alternate Display Time-out (ADT)
This menu sets the time-out time of the menu display. You define the
number of seconds that elapse before the display returns to the
previous screen.
To set the time-out time:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[PRMT].
3.Pressto scroll to the ADT option.
4.Press[ADT].
5.Press
Press
Press
Press[] to increment the displayed value by 1.
[1], to quick-set the value to 1.
[10], to quick-set the value to 10.
6.Press
to...")
![Page 67
MICOM-2E-ALE Owner’s Manual
44
Setting Radio Options
MICOM-2E offers three programmable radio options:
· Tuner (TUNE)
· Accessory (ACC)
· ALE
To set the radio option:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[OPTS].
3.Press the function key beneath the option of your choice:
TUNE - toggles the tuner.
ACC - sets the accessory setting.
ALE - toggles ALE option on/off.
4.Press to confirm,to cancel.](http://img.usermanuals.tech/thumb/52/104703/w64_micom-2-manual-1524735781_d-66.png "Page 67
MICOM-2E-ALE Owner’s Manual
44
Setting Radio Options
MICOM-2E offers three programmable radio options:
· Tuner (TUNE)
· Accessory (ACC)
· ALE
To set the radio option:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[OPTS].
3.Press the function key beneath the option of your choice:
TUNE - toggles the tuner.
ACC - sets the accessory setting.
ALE - toggles ALE option on/off.
4.Press to confirm,to cancel.")
![Page 68
29
Programming the Radio
MICOM-2E is already configured for use at the time of purchase.
However, at times, it is necessary to change the configuration. The
following sections relate to MICOM-2E’s Programming mode.
You can find your radio parameter and change it by pressing a
function key under the parameter name, or you can press
the scroll arrow keys to scroll through the parameters.
To enter Programming mode:
1.Pressto display the Menu screen.
2.Pressto scroll to the second Menu screen.
3.Press[PROG]...](http://img.usermanuals.tech/thumb/52/104703/w64_micom-2-manual-1524735781_d-67.png "Page 68
29
Programming the Radio
MICOM-2E is already configured for use at the time of purchase.
However, at times, it is necessary to change the configuration. The
following sections relate to MICOM-2E’s Programming mode.
You can find your radio parameter and change it by pressing a
function key under the parameter name, or you can press
the scroll arrow keys to scroll through the parameters.
To enter Programming mode:
1.Pressto display the Menu screen.
2.Pressto scroll to the second Menu screen.
3.Press[PROG]...")
![Page 70
Programming the Radio
31
To copy a channel’s parameters to another channel:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[CHAN].
3.Press[GET].
4.Enter the number of the channel to which you want
to copy the parameters with the keypad.
5.Select the source channel.
6.Press
[STOR].
Note that the channel number is flashing, which indicates that you can
change it or leave it at the current number.
7.Enter the number of the channel to which you want
to copy the parameters with the keypad....](http://img.usermanuals.tech/thumb/52/104703/w64_micom-2-manual-1524735781_d-69.png "Page 70
Programming the Radio
31
To copy a channel’s parameters to another channel:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[CHAN].
3.Press[GET].
4.Enter the number of the channel to which you want
to copy the parameters with the keypad.
5.Select the source channel.
6.Press
[STOR].
Note that the channel number is flashing, which indicates that you can
change it or leave it at the current number.
7.Enter the number of the channel to which you want
to copy the parameters with the keypad....")
![Page 71
MICOM-2E-ALE Owner’s Manual
32
To delete a channel from MICOM-2E:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[CHAN].
3.Press[ERAS].
4.Enter the number of the channel to which you want
to delete.
If you need to backspace, press [BACK].
If you want to clear the display, press
[CLR].
5.Press
to confirm.](http://img.usermanuals.tech/thumb/52/104703/w64_micom-2-manual-1524735781_d-70.png "Page 71
MICOM-2E-ALE Owner’s Manual
32
To delete a channel from MICOM-2E:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[CHAN].
3.Press[ERAS].
4.Enter the number of the channel to which you want
to delete.
If you need to backspace, press [BACK].
If you want to clear the display, press
[CLR].
5.Press
to confirm.")
![Page 72
Programming the Radio
33
Setting the Tx Power Level
Four power levels are possible for a programmed channel:
· LOW
· MED
· HIGH
· MAX
To set the channel’s Tx power level:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press
[CHAN].
3.Press[PWR].
4.Press the function key that appears below the power
level of your choice: Low, Med(ium), High,
Max(imum).
5.Press to confirm,to cancel.](http://img.usermanuals.tech/thumb/52/104703/w64_micom-2-manual-1524735781_d-71.png "Page 72
Programming the Radio
33
Setting the Tx Power Level
Four power levels are possible for a programmed channel:
· LOW
· MED
· HIGH
· MAX
To set the channel’s Tx power level:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press
[CHAN].
3.Press[PWR].
4.Press the function key that appears below the power
level of your choice: Low, Med(ium), High,
Max(imum).
5.Press to confirm,to cancel.")
![Page 74
Programming the Radio
35
Choosing the Band Type
MICOM-2E has two band types:
· USB - upper side band
· LSB - lower side band
To set the channel band:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[CHAN].
3.Pressto scroll to the BAND option.
4.Press[BAND].
5.Press the function key beneath the band option of your choice.
6.Press
to confirm,to cancel.](http://img.usermanuals.tech/thumb/52/104703/w64_micom-2-manual-1524735781_d-73.png "Page 74
Programming the Radio
35
Choosing the Band Type
MICOM-2E has two band types:
· USB - upper side band
· LSB - lower side band
To set the channel band:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[CHAN].
3.Pressto scroll to the BAND option.
4.Press[BAND].
5.Press the function key beneath the band option of your choice.
6.Press
to confirm,to cancel.")
![Page 75
MICOM-2E-ALE Owner’s Manual
36
Setting the Operating Mode
MICOM-2E offers three operating mode options:
· SSB - single side band
· AME - amplitude modification equivalent
· PLT - pilot mode
To set the operating mode:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[CHAN].
3.Pressto scroll to the MODE option.
4.Press[MODE].
5.Press the function key beneath the mode of your choice.
6.Press
to confirm,to cancel.](http://img.usermanuals.tech/thumb/52/104703/w64_micom-2-manual-1524735781_d-74.png "Page 75
MICOM-2E-ALE Owner’s Manual
36
Setting the Operating Mode
MICOM-2E offers three operating mode options:
· SSB - single side band
· AME - amplitude modification equivalent
· PLT - pilot mode
To set the operating mode:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[CHAN].
3.Pressto scroll to the MODE option.
4.Press[MODE].
5.Press the function key beneath the mode of your choice.
6.Press
to confirm,to cancel.")
![Page 76
Programming the Radio
37
Using Automatic Gain Control (AGC)
MICOM-2E offers two AGC speeds: SLOW and FAST.
To set the AGC speed:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[CHAN].
3.Pressto scroll to the AGC option.
4.Press[AGC].
5.Press the function key beneath the AGC speed of your choice.
6.Press
to confirm,to cancel.](http://img.usermanuals.tech/thumb/52/104703/w64_micom-2-manual-1524735781_d-75.png "Page 76
Programming the Radio
37
Using Automatic Gain Control (AGC)
MICOM-2E offers two AGC speeds: SLOW and FAST.
To set the AGC speed:
1.Enter the Radio Programming menu (steps 1-4 on
page 29).
2.Press[CHAN].
3.Pressto scroll to the AGC option.
4.Press[AGC].
5.Press the function key beneath the AGC speed of your choice.
6.Press
to confirm,to cancel.")
MICOM-2E-ALE Owner’s Manual 32 To delete a channel from MICOM-2E: 1.Enter the Radio Programming menu (steps 1-4 on page 29). 2.Press[CHAN]. 3.Press[ERAS]. 4.Enter the number of the channel to which you want to delete. If you need to backspace, press [BACK]. If you want to clear the display, press [CLR]. 5.Press to confirm.
Programming the Radio 33 Setting the Tx Power Level Four power levels are possible for a programmed channel: · LOW · MED · HIGH · MAX To set the channel’s Tx power level: 1.Enter the Radio Programming menu (steps 1-4 on page 29). 2.Press [CHAN]. 3.Press[PWR]. 4.Press the function key that appears below the power level of your choice: Low, Med(ium), High, Max(imum). 5.Press to confirm,to cancel.
MICOM-2E-ALE Owner’s Manual 34 Setting the Frequency MICOM-2E offers four frequency options: · Simplex Frequency (SMPX) - transmits and receives on the same frequency. · Duplex Frequency (DPLX) - transmits on one frequency and receives on a different frequency. · Receiving Only Frequency (RXO) - defines a frequency for reception only. · Transmitting Only Frequency (TXO) - defines a frequency for transmission only. To set a channel’s frequency: 1.Enter the Radio Programming menu (steps 1-4 on page 29). 2.Press[CHAN]. 3.Pressto scroll to the FREQ option. 4.Press[FREQ]. 5.Press the function key beneath the frequency option of your choice. 6.Enter the frequency of your choice with the keypad. 7.Presstwice to confirm,to cancel.
Programming the Radio 35 Choosing the Band Type MICOM-2E has two band types: · USB - upper side band · LSB - lower side band To set the channel band: 1.Enter the Radio Programming menu (steps 1-4 on page 29). 2.Press[CHAN]. 3.Pressto scroll to the BAND option. 4.Press[BAND]. 5.Press the function key beneath the band option of your choice. 6.Press to confirm,to cancel.
MICOM-2E-ALE Owner’s Manual 36 Setting the Operating Mode MICOM-2E offers three operating mode options: · SSB - single side band · AME - amplitude modification equivalent · PLT - pilot mode To set the operating mode: 1.Enter the Radio Programming menu (steps 1-4 on page 29). 2.Press[CHAN]. 3.Pressto scroll to the MODE option. 4.Press[MODE]. 5.Press the function key beneath the mode of your choice. 6.Press to confirm,to cancel.
Programming the Radio 37 Using Automatic Gain Control (AGC) MICOM-2E offers two AGC speeds: SLOW and FAST. To set the AGC speed: 1.Enter the Radio Programming menu (steps 1-4 on page 29). 2.Press[CHAN]. 3.Pressto scroll to the AGC option. 4.Press[AGC]. 5.Press the function key beneath the AGC speed of your choice. 6.Press to confirm,to cancel.
MICOM-2E-ALE Owner’s Manual 38 Setting the Band Width MICOM-2E offers four band width options: · 2700 · 3300 · LSM - Low Speed Modem · CW - Continuous Wave To set the channel band width: 1.Enter the Radio Programming menu (steps 1-4 on page 29). 2.Press[CHAN]. 3.Presstwice to scroll to the BW option. 4.Press[BW]. 5.Press the function key beneath the band width of your choice. 6.Press to confirm,to cancel.
Programming the Radio 39 Setting Radio Parameters Baud Rate (BAUD) MICOM-2E offers four baud rate options: · 1.2 - 1200 bps · 2.4 - 2400 bps · 4.8 - 4800 bps · 9.6 - 9600 bps To set the baud rate: 1.Enter the Radio Programming menu (steps 1-4 on page 29). 2.Press[PRMT]. 3.Press[BAUD]. 4.Press the function key beneath the baud rate of your choice: 1.2 = BAUD - 1200 2.4 = BAUD - 2400 4.8 = BAUD - 4800 9.6 = BAUD - 9600 5.Press to confirm,to cancel.
MICOM-2E-ALE Owner’s Manual 40 Data Power (DPWR) MICOM-2E offers four data power levels: · LOW · MED · HIGH · MAX To set the data power level: 1.Enter the Radio Programming menu (steps 1-4 on page 29). 2.Press[PRMT], Radio Parameters. 3.Press[DPWR], Data Power. 4.Press the function key beneath the DT power level of your choice. 5.Press to confirm,to cancel.