Motorola Mc3090z Owners Manual

MobileRFID Functionality 3 - 9
Run/Stop RFID
To stop RFID service, tap Stop in MobileRFID menu.
Figure 3-12RFID Stopped
To restart RFID, tap Run in MobileRFID menu.  

3 - 10 MC919Z Integrator Guide Supplement 

Chapter 4 RFID Sample Application
Introduction
The RFID Application CS_RFID3Sample6.exe provides an overview of how the application works and assists 
application developers in developing custom applications. 
The mobile computer can read, write, lock, kill, and program Gen2 tags. Each tag contains the EPC number (64 or 
96 bits), CRC, and kill code. The mobile computer can also collect data by decoding in-range EPC Gen2 RFID 
tags. 
Initiating the read command within the sample application causes the...

4 - 2 MC919Z Integrator Guide Supplement
Launching the RFID Sample Application
Select RFID Demo in the Start menu to start the RFID sample application.
Figure 4-1RFID Demo Icon
Figure 4-2RFID Sample Application Window
In the sample application window:
•Tap the Start Reading button to initiate the tag read. Tap Stop Reading to terminate tag reading.
•Use the Mem Bank drop-down to select a tag memory bank to read. The default memory bank is EPC 
(None). Other options are TID, Reserved, and User. 

RFID Sample Application 4 - 3
Connection
Tap Connection to display the reader IP and port number. 
Select Disconnect to disconnect the reader.
Figure 4-3Connection Window 

4 - 4 MC919Z Integrator Guide Supplement
Capabilities
Select Menu > Capabilities to view the capabilities of the connected reader.
Figure 4-4Capabilities Window 

RFID Sample Application 4 - 5
Configuration Menu Options
The Configuration Menu includes the following options: 
•Tag Storage Settings 
•Antenna 
•RF Mode 
•Singulation 
•Power On/Off Radio 
•Reset to Factory Defaults 
Tag Storage Settings
Select Menu > Config > Tag Storage Settings to view/configure tag storage settings. 
Figure 4-5Tag Storage Settings Window 
The Tag Storage Settings window includes the following fields: 
•Maximum Tag Count - The maximum number of tags to store in the DLL.
•Max Tag ID...

4 - 6 MC919Z Integrator Guide Supplement
Antenna
Select Menu > Config > Antenna to view/configure the antenna. 
Figure 4-6Antenna Configuration Window
The Antenna Configuration window includes the following fields: 
•Antenna ID - Select an antenna ID to update the configuration values in the other fields.
•Receive Sensitivity (dB) - Lists the reader-supported values for the selected antenna.
•Transmit Power (dBm) - Lists the reader-supported values for the selected antenna.
•Hop Table Index - Updates the...

RFID Sample Application 4 - 7
RF Mode
Select Menu > Config > RF Mode to view/configure the RF mode for each antenna.
Figure 4-7RF Mode Window
The RF Mode window includes the following fields:
•Antenna ID - Select an antenna ID to update the configuration values in the other fields.
•Tari Value - TARI specified in nsec.
•RF Mode Table - RF mode table configured for the current antenna.
•Apply - Select to apply configuration changes.  

4 - 8 MC919Z Integrator Guide Supplement
Singulation
Select Menu > Config > Singulation to view/configure the singulation control settings for each antenna. 
Figure 4-8Singulation Control Settings Window
This Singulation settings window includes the following fields: 
•Antenna ID - Select an antenna ID to update the configuration values in the other fields.
•Session - The session number for the inventory operation.
•Tag Population - The approximate tag population in the RF field of the antenna.
•Tag...