Motorola Mbp38s2 Manual

Getting Started11
ENGLISH
1. Connect the micro USB plug of the power adapter to the Parent Unit and 
the other end to a suitable electrical outlet. Only use the enclosed power 
adapter (5V DC / 1500mA) with the micro USB plug.
2. Press and hold the 
0 POWER ON/OFF button for 1 second to turn ON the 
Parent Unit.
3. Once the Baby and Parent Units are switched on, the display on the Parent 
Unit will show the video captured by the Baby Unit.
4. If there is no connection or you are out of range, the unit...

12Getting Started
2.3 Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to 
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures 
below:
1. Press the 
M button of the Parent Unit and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until   is highlighted, and 
the  del/   add/   view/   scan menu will pop up.
3. Press the + UP button...

Using the Baby Monitor13
ENGLISH
3. Using the Baby Monitor
3.1 Setting up
•  Place the Baby Unit in a convenient location (e.g. on a table) and point the 
camera lens towards the area you want to monitor.
•  Adjust the angle of the Baby Units head by rotating the camera up, down, left 
and right until you are satisfied with the image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the babys reach! If there is interference with 
the picture or sound, try moving the units to different...

14Using the Baby Monitor
3.6 Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby 
Unit will be displayed at the top of the LCD screen. The readings will turn RED if 
the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will 
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading 
will change to LL °C / °F if the temperature goes below 1°C / 34°F. 

Parent Unit Menu Options15
ENGLISH
4. Parent Unit Menu Options
4.1 Volume
1. Press the Volume button - or + to adjust the volume level, the   icon will 
pop up and you can select the desired volume level from level 0~8. (The 
default volume level setting is level 5.) 
4.2 Brightness
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until   is highlighted.
3. Press the + UP button or - DOWN button to select the desired brightness 
level from level 1 ~ 8. (The...

16Parent Unit Menu Options
4.6 Camera Control
4.6.1 Add (pair) a camera
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until   is highlighted, and 
the  del/   add/   view/   scan menu will pop up.
3. Press the + UP button or - DOWN button to select  add, and press the O button to confirm.
4. Camera   will pop up, press the + UP button or - DOWN 
button to select the desired Camera, and press the O button to start 
searching for a camera unit. The green...

Parent Unit Menu Options17
ENGLISH
4.6.3 Delete a camera
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until   is highlighted, and 
the  del/   add/   view/   scan menu will pop up.
3. Press the + UP button or - DOWN button to select  del, and press the O button to confirm.
4. Camera   will pop up, press the + UP button or - DOWN 
button to select the desired Camera, and press the O button to delete 
that registration.
Note:
You are not allowed to delete...

18Parent Unit Menu Options
4.9 Video
You can record a video of your baby with this function. The videos will be stored 
on the SD Memory Card, so please ensure the memory card has enough free 
memory.
1. Press the 
M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until   is highlighted.
3. Press the + UP button or - DOWN button to select  , and press O 
button to start video recording, press O button to stop.
4. Press the + UP button or - DOWN button to select   and...

Disposal of The Device (environment)19
ENGLISH
5. Disposal of The Device (environment)
At the end of the product lifecycle, you should not dispose of 
this product with normal household waste. Take this product to 
a collection point for the recycling of electrical and electronic 
equipment. The symbol on the product, users guide and/or 
box indicates this. 
Some of the product materials can be reused if you take them to 
a recycling point. By reusing some parts or raw materials from used products 
you...

20Cleaning
6. Cleaning 
Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth. 
Never use cleaning agents or abrasive solvents.
Cleaning and care
•  Do not clean any part of the product with thinners or other solvents and 
chemicals – this may cause permanent damage to the product which is not 
covered by the warranty.
•  Keep the Baby Monitor away from hot, humid areas or strong sunlight, and 
dont let it get wet.
•  Every effort has been made to ensure high standards of...