Motorola I830 User Guide

93
Updating Satellite Almanac Data
Stand still. If possible, stand still until your phone
is finished determining your location. Moving
your phone at a walking pace while your phone
is calculating your approximate location may
substantially decrease GPS performance.
In a car. When using the GPS Enabled feature in
a car, position your phone so that the GPS
antenna has good access to GPS signals
through the car’s windows. Typically, the GPS
antenna has best access to GPS signals in a car
when placed near...

94GPS EnabledSetting Privacy OptionsYour phone’s GPS privacy options control whether
Java applications on your phone or other software
applications may view the location of your
phone.You may set your phone to one of these
GPS privacy options.
Note:Privacy options do not apply to the
transmission of location information
during emergency 911 calls.
To set your GPS privacy options:
1From the main menu, selectGPS > Privacy.
2If your GPS PIN security feature is enabled,
enter your GPS PIN. (See “Setting the...

95
Using GPS with Map Software
To change your GPS PIN:
1From the main menu, selectSettings >
Security > Change Password > GPS PIN.
2Enter the current GPS PIN.
Note:When you receive your phone, your GPS
PIN is 0000.
3PressAunderOk.
4Enter the new 4- to 8-digit GPS PIN.
5PressAunderOk.
6Enter the new 4- to 8-digit GPS PIN to confirm.
7PressAunderOk.
Using GPS with Map SoftwareYou can use the GPS feature of your phone to
provide approximate location data to a laptop
computer or similar device that is...

96GPS EnabledGetting StartedTo connect your phone to your laptop or other
device:
1Open the connector cover.2With the phone’s display facing up, insert the
data cable’s connector into the accessory
connector, until you hear a click.
3InsertthedataplugintotheCOMportofyour
laptop or other device.
Make sure no other application is using the COM
port selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
Bits per second: 4800
Data bits: 8
Parity: None
connector...

97
Using GPS with Map Software
Stop bits: 1
Flow control: Hardware
To set your phone to send location information to
your laptop or other device:
1From the main menu, selectGPS > Interface.
2SetNMEA OUTtoOn.
Your phone is now sending location data to your
laptop or other device.
To stop your phone from sending location data to
your laptop or other device:
SetNMEA OUTtoOff.
Each time you power your phone on,NMEA OUT
is automatically set toOff. 

98DatebookDatebook stores up to 250 events. You can store
events over a 13 month period — 12 months after
and 1 month before the current date.
A Datebook event contains:
A subject — A name you assign to the event.
You can also enter a phone number, Direct
Connect number, or Talkgroup number here.
After the event is stored, you can call this
number from Datebook or when you get a
reminder of this event.
A location — The location of the event. You can
also enter a phone number, Direct Connect
number, or...

99
Creating Events
In week view, events appear as markers
corresponding to their times.
In month view, days with events appear with a
marker in the corner.
To view an event:
1Select the day the event occurs.
2Select the event.
To change the current view:
1While viewing Datebook, pressm.
2Select the view you want.
Note:Day view is the default setting.
Navigating DatebookTo scroll through Datebook:
Scroll left and right using the navigation key.-or-
In week view and month view, press*or#....

100Datebook
2To assign a subject to the event:
SelectSubject.
Enter the name. See “Entering Text” on page
33.-or-
PressAunderBrowseto choose from
common event names.-or-
Enter a phone number, Direct Connect number,
or Talkgroup number. After the event is stored,
you can call this number.
When you are finished, pressO.
3Ifyouwanttoassignalocationtotheevent:
SelectLocation.
Enter the location. See “Entering Text” on page
33.-or-
Enter a phone number, Direct Connect number,
or Talkgroup number. After the...

101
Editing Events
8If you want to create a reminder for this event:
SelectReminder.
Select the reminder time you want.-or-
SelectCustomto enter a reminder time.
Note:If an event has no start time, you can not
create a reminder for it.
9If you have entered all the information you want
for this event, pressAunderDone.-or-
Ifyouwanttoassignaringtone,aprofile,ora
Java application to the event, see “Assigning
More Options”.
Assigning More OptionsTo assign more options before storing an event:
1If you have...

102Datebook
To copy an event to another date:
1Select the day the event occurs.
2Select the event.
3Pressm.
4SelectCopy.
5PressAunderYe sto confirm.
6Enter the date you want.
7PressO.
8Ifyouwanttochangemoreinformation,follow
the applicable instructions in “Creating Events”
on page 99 to edit the various fields.Deleting Events1Select the day the event occurs.
2Select the event.
3Pressm.
4SelectDelete.
5If the event is not a recurring event, pressOor
pressAunderYe sto confirm.-or-
If the event is a...