Motorola I30sx User Guide

123
Settings
Vo i c e  M a i l — sets type of notification for Voice Mail messages.
Net Alert — sets type of notification for Net Alert messages.
Ring Style and Notification Type
When you set SilentAll to On, your phone notifies you of all types of calls, 
messages, and alerts on your phone’s screen.
When you set SilentAll to Off, the following features display after SilentAll on 
the Ring/Volume screen, enabling you to set notification options for each:
Line 1 — sets the ring style and type of...

124
nextel.com TIP: To hear the ring style you have selected, press the volume 
control buttons on the side of your phone.
Notification Types
When you set a notification type, you have these options:
Ring — the phone rings to notify you.
Silent — the phone does not ring to notify you.
To set a notification type:
Phone Setup
Phone Setup sets some basic phone features. Access Phone Setup to set the 
following options:
Line — enables you to choose Line 1 or Line 2 as the active line for 
outgoing calls....

125
Settings
Any Key — when turned on, enables you to answer calls by pressing any 
key on the alphanumeric keypad.
Network ID — sets the phone’s network IDs. Use only under the direction 
of a Nextel Customer Care Representative.
In Call Setup
In Call Setup sets the in-call timer, message notification, and call waiting 
features.
The In Call Timer option turns the following features on and off:
Display — the duration of each call displays on the phone’s screen.
Minute Beep — an audible beep occurs...

126
nextel.com
The Unlock code is required to enable the phone lock feature, to unlock the 
phone, and to set a new Unlock code. Your default Unlock code is 0000.
Phone lock provides two options for locking the phone:
Lock Now locks the phone immediately after you set the option.
Auto Lock locks the phone the next time the phone is powered on.
Setting Keypad Lock
The i30sx Phone includes a keypad lock feature that enables you to lock the 
phone’s keypad to avoid inadvertently pressing or placing calls....

127
Settings
Initial Setup
Initial Setup enables you to control a variety of your phone’s features that you 
may want to modify when you first get your phone:
Time/Date Format — sets the format in which the time and date display 
on your phone.
Ye a r — sets the current year.
Auto Redial — turns the automatic redial feature on and off.
Backlight — controls how long your phone’s backlight stays on.
Sensor - controls the photo sensor to activate the backlight when your 
phone is in poor lighting...

128
nextel.com
To set the time and date format, or turn time and date display on or off:
Setting Auto Redial
When Auto Redial is set to On, if you receive a System Busy, Try Later 
message while making a call, the phone will redial the number automatically. 
You will hear a ring-back tone when a successful call is placed.
When Auto Redial is set to Off, you must press and hold 
s to redial the last 
number dialed.
1Press q, then scroll to Settings. Press C under SELECT. Press 
R to scroll to Initial...

129
Settings
Setting Backlight Timer
The backlight illuminates the display when you receive or make calls or use the 
phone in poor lighting conditions. You can set the amount of time that the 
backlight stays on to 5, 10, 20, or 30 seconds, or set it to stay on continuously or 
stay off at all times.
NOTE: Setting the backlight to stay on continuously will decrease the 
amount of time you can use the phone before recharging the 
battery.
Setting Photo Sensor
To conserve battery power, the photosensor...

130
nextel.com
Adjusting Status Light
The status light is located on the top of the phone. It illuminates when the phone 
is on. See “Status of Your i 30sx Phone” on page 25. You can turn the status 
light feature on or off from the Initial Setup screen.
Setting Contrast
You can set the contrast of your phone’s display to be lighter or darker. Use T 
to increase or decrease the contrast.
Setting Scrolling
You can set your phone to scroll through menus and lists in either of two ways:
Up/Down — when you...

131
Settings
Feature Reset
Feature Reset returns all your phone’s settings to their original defaults. Use 
only under the direction of a Nextel Customer Care Representative.
Setting Baud Rate
You can set your phone’s baud rate from the Initial Setup screen. Scroll to the 
Baud Rate option and then choose the baud rate you want, or choose Auto to 
set your phone to automatically choose the appropriate baud rate.
Setting TTY Mode 
TTY Setup enables you to set your options for using your phone with a...

132
nextel.com
“HCO off please” — to turn off HCO mode.
NOTE: TTY device manufacturer’s proprietary feature such as Turbo-
Code, High-Speed, and Interruption are not supported by your 
phone. These features must be turned off or disabled to use 
your TTY device with your phone.
Setting TTY Baud Rate
By default, your phone’s TTY baud rate is set to 45.45, the baud rate required 
for TTY calls within the U.S. To make calls outside the U.S., set your TTY baud 
rate to 50.0.
To change the TTY baud rate:...