Mitsubishi Xd400u Data Projector User Manual

 EN - 11
ENGLISH
Projector + video equipment having a DVI-D terminal (For XD480U / XD450U only)
You can project high-quality images by connecting the DVI terminal of this projector to video equipment having a 
DVI-D output terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data 
that are output from DVD players. 
•  For connection to the DVI-D terminal, use a commercially available DVI cable. 
•  Select DVI  as the input source. 
•  Only RGB signals are...

EN - 12
Projector + Computer
For computer with Mini D-SUB
•  The signal inputted to the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) IN-2 terminal is not outputted from the 
COMPUTER OUT terminal. 
•  Make sure to connect computer with DVI cable before starting computer. If connecting computer with DVI cable 
after starting the computer, the image signal may not be outputted from DVI terminal of computer.
•  Plug the power cord of the projector in the wall outlet fi rst, and then boot up the computer.
•  When...

 EN - 13
ENGLISH
Preparation
1.  Tilt up the project to the appropriate angle. 
2.  Press the foot adjustment buttons next to the adjust-
ment feet (rear), and the adjustment feet will come 
out. 
3.  Release the buttons to lock the adjustment feet (rear) 
to that position.
4.  Rotate the adjustment feet (rear) for fi ne adjustment.
After using the projector:
5.  Put the adjustment feet (rear) back into the projector 
by pressing the foot adjustment buttons.
Important: 
•  If necessary, rotate the...

EN - 14
Basic operation
•  Images may not be projected with good quality in 
an extremely hot or cold environment. (This is not a 
product malfunction.) 
4.  Adjust the focus by turning the focus ring.
5.  Choose your desired external input source using  the 
COMPUTER or VIDEO button.
•  The input source is switched between COMPUT-
ER 2 and DVI at every press of the COMPUTER 
2 button on the remote control. (For XD480U / 
XD450U only)
•  The input source is switched between COM-
PUTER 1, COMPUTER 2 and...

 EN - 15
ENGLISHVOLUME     10
Volume from the speaker
Press the VOLUME + or - button to change the volume 
from the speaker.
The volume control bar will appear on the screen.
•  The volume control bar will disappear about 10 sec-
onds after the VOLUME button is released.
•  The VOLUME buttons dont function while the menu 
selection bar or the menu is being displayed. 
•  When a high-level audio signal, such as a DVD audio 
signal, is supplied to the AUDIO IN terminal, the out-
put from the speaker may be...

EN - 16
Menu operation
IMAGE
XGA60opt.
INSTALLATION
opt.XGA60
INSTALLATION
opt.
AUTO POWER 
ON
AUTO POWER 
OFF
OFF OFF
XGA60
AUTO POWER 
ON
AUTO POWER 
OFF
OFF OFF
AUTO POWER 
ON
AUTO POWER 
OFF
30 minOFF
Basic operation
Several settings can be adjusted using the menu. 
Example : Auto power off time setting 
1.  Press the MENU button.
2.  Press the  or  button to select INSTALLATION.
3.  Press the ENTER button (or  button).4.  Press the 
 or  button to select AUTO POWER 
OFF. 
5.  Press the  or ...

EN - 17
ENGLISH
INSTALLATION
opt.
ON
BACK COLOR AUTO POWER 
ON
AUTO POWER 
OFF
SPLASH 
SCREEN
MUTE MODE
LAMP MODEON
BLUE
BLACKOFF
IMAGE
CAPTURESETUPOFF
STANDARD
OFF IMAGE 
REVERSE
XGA60
CONTRAST
IMAGE
0
BRIGHTNESS 0
STANDARD
0
COLOR
AUTO0
XGA60
CineRichColor AUTO
COMPUTEROFF
TINT
0SHARPNESS
COLOR TEMP.
GAMMA MODE COLOR MATRIX sRGB
opt.
1 IMAGE
CONTRAST .......... Use to adjust the image contrast. The contrast becomes 
higher as the value increases.
BRIGHTNESS ....... Use to adjust the image brightness....

EN - 18
3 FEATURE
MENU POSITION .... Use to select the position of the menu on the screen,  1.  
(upper left) or 2. 
 (lower right).
EXPAND MODE .... Choose the mode for enlarging the image. See page 21.
CINEMA MODE .... When AUTO is selected, the fi lm mode will be automatically 
activated when a fi lm source signal is inputted. When OFF is 
selected, the fi lm mode will not be activated. 
VIDEO SIGNAL ..... When AUTO is selected, the appropriate video format is 
automatically selected depending on the...

EN - 19
ENGLISH
Image adjustment
CONTRAST R
COLOR TEMP.-USER
0
CONTRAST B 0
BRIGHTNESS R 0
BRIGHTNESS B 0
CONTRAST
IMAGE
0
BRIGHTNESS 0
STANDARD
0
COLOR
AUTO0
XGA60
CineRichColor AUTO
COMPUTEROFF
TINT
0SHARPNESS
COLOR TEMP.
GAMMA MODE COLOR MATRIX sRGB
opt.
4.  Press the 
 or  button to select the desired color.
•  If you want to adjust the all color balance of the 
image, select RGB-TINT.
5.  Press the  or  button to adjust the color balance 
of the selected color.
6.  Repeat steps 4 and 5 for...

EN - 20
Adjustment of the image from the computer
This projector adjusts the format of the video signal 
supplied from the computer. However, sometimes im-
ages are not projected correctly owing to the type of 
the computer used. When the image from the computer 
isnt projected correctly, press the AUTO POSITION 
button. (See page 15.) If the image isnt projected cor-
rectly yet, adjust the image from the computer using the 
menu.  
To move the image horizontally :
Adjust HORIZ. POSITION in the SIGNAL...