Mitsubishi Xd400u Data Projector User Manual

ENGLISH
XD480
XD450
XD400
DATA PROJECTOR
MODEL
XD480U
XD450U
XD400U
User Manual
This User Manual is important to you.
Please read it before using your projector. 

EN - 2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 
NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert 
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure 
that may be of suffi cient magnitude to constitute a risk of electric shock.
The exclamation point...

EN - 3
ENGLISH
Contents
Trademark, Registered trademark
Macintosh is registered trademark of Apple Computer Inc.
DLP™, Digital Micromirror Device and DMD are all trademarks of Texas Instruments.
Other brand or product names are trademarks or registered trademarks of their respective holders.
Declaration of Conformity
Model Number :   XD480U / XD450U / XD400U 
Trade Name :   MITSUBISHI ELECTRIC 
Responsible party :  Mitsubishi Digital Electronics America, Inc.
 9351 Jeronimo Road, Irvine, CA 92618 U.S.A...

EN - 4
Important safeguards
Please read all these instructions regarding your projec-
tor and retain them for future reference. Follow all warn-
ings and instructions marked on the projector.
1. Read instructions
  All the safety and operating instructions should be 
read before the appliance is operated.
2. Retain instructions
  The safety and operating instructions should be 
retained for future reference.
3. Warnings
  All warnings on the appliance and in the operating 
instructions should be adhered...

EN - 5
ENGLISH
WARNING:
Unplug immediately if there is something wrong with 
your projector.
Do not operate if smoke, strange noise or odor comes 
out of your projector. It may cause fi re or electric shock. 
In this case, unplug immediately and contact your 
dealer.
Never remove the cabinet.
This projector contains high voltage circuitry. An inad-
vertent contact may result in an electric shock. Except 
as specifi cally explained in User Manual, do not attempt 
to service this product by yourself. Please...

EN - 6
Overview
123456
98771011121314
1 FOCUS ring
2 ZOOM ring
3 Control panel
4  Air outlet grille
5  Remote control sensor (Front)
6  Air inlet grille
7  Air outlet grille
8 Terminal board
9  Kensington Security Lock Standard connector
10 Air inlet grille
Control panel
1 Power button
2 AUTO POSITION / 
 button
3 COMPUTER /  button
4 MENU button
5 STATUS indicator
6 POWER indicator
7 KEYSTONE/ENTER button
8 VIDEO/  button
9  button
Important:
•  While the menu or the screen for the keystone adjust-...

EN - 7
ENGLISH
Bottom side
32 1
COMPUTER
VIDEO
KEYSTONE
EXPAND
VOLUME
LASER P in P AUTO POSITION
MENUR-CLICKENTER
MUTESTILL16 : 9
SELECTDVD VIDEO
12
12
MEMORY
1
2
3
4
5
6
7
8
9
10
11
1223
22
21
24 20
19
18
17
16
15
14
13
1  Adjustment foot (Front)
2 Lamp cover
3 Adjustment feet (Rear)
Caution:
Do not replace the lamp immediately after using the pro-
jector because the lamp would be extremely hot and it 
may cause burns.
Remote control1 Laser aperture
2 Transmission window
3 Indicator
4 POWER button
5...

EN - 8
Remote control
Battery installation
Use two AA size batteries.
1.  Remove the back cover of the remote control by pushing the battery compartment door in the direction of the ar-
row.
2.  Load the batteries making sure that they are positioned correctly (+ to +, and - to -).
•  Load the batteries from - spring side, and make sure to set them tightly.
3.  Replace the back cover.
Caution:
•  Use of a battery of wrong type may cause explosion.  
•  Only Carbon-Zinc or Alkaline-Manganese Dioxide type...

 EN - 9
ENGLISH
40 102 32 81 24 61 51 1.3 62 1.6 2.8 7.2
60 152 48 122 36 91 77 2.0 94 2.4 4.3 10.9
80 203 64 163 48 122 103 2.6 125 3.2 5.7 14.5
100 254 80 203 60 152 130 3.3 157 4.0 7.1 18.1
150 381 120 305 90 229 196 5.0 237 6.0 10.7 27.1
200 508 160 406 120 305 262 6.6 316 8.0 14.2 36.2
250 635 200 508 150 381 327 8.3 – – 17.8 45.2
300 762 240 610 180 457 393 10.0 – – 21.4 54.3
Installation
Layout of the projector
Image size varies depending on the distance between the screen and the projector.
Front...

EN - 10
S-VIDEO IN
VIDEO IN AUDIO IN (1/2)
VCR, etc.
to video output
to audio output
to S-video output
Basic connections
This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal 
computer that have analog RGB output connectors. 
Important:
• Make sure that the connected device is turned off before starting connection.
•  Plug in the power cords of the projector and the connected devices fi rmly. When unplugging, hold and pull the 
plug. Do not pull...