Mitsubishi Xd211u Data Projector User Manual
Here you can view all the pages of manual Mitsubishi Xd211u Data Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
EN-11 ENGLISH Basic connections (continued) Projector + Computer For computer with Mini D-SUB For analog connection: 1. Connect one end of the supplied RGB cable to the COMPUTER IN terminal of the projector. 2. Connect the other end of the RGB cable to the monitor port of the computer. For monitor connection:Connect the RGB cable from the monitor to the MONITOR OUT terminal of the projector. • Images may not be displayed correctly depending on the type of the input signal. See the instruction manual...
Page 12
EN-12 Preparation Preparation for projection 1. Attach the provided power cord to the projector. 2. Plug the power cord in the wall outlet. 3. Remove the lens cap. Warning: • Do not look into the lens directly when the projector is on. • The lens cap is for protecting the lens. If you leave the lens cap on the lens with the projector turned on, it may be deformed because of heat build-up. Remove the lens cap when you turn on the pro- jector. • One of power cords for the U.S., Europe and U.K. is...
Page 13
EN-13 ENGLISH Basic operation Power-on 1. Turn on the device connected to the projector first. 2. Plug the power cord in the wall outlet. • The POWER indicator lights up. • If the power cord is unplugged from the wall outlet before the projector is cooled down completely after use, it can happen that the lamp does not turn on in next time because of the high temperature of lamp. In this case, wait a few minutes and try to light the lamp again. 3. Press the ON button on the remote control. • It...
Page 14
EN-14 Basic operation (continued) Power-off Use the following procedure to turn off the projector. The lamp may deteriorate if the projector is powered off and on repeatedly within 30 minutes after the lamp is lighted. 1.Press the STANDBY button on the remote control. • The message Power Off? Press Power again appears on the screen. • To cancel, press any button except the POWER button. (Some buttons on the remote control don’t function for can- cel.) 2.Press the STANDBY button on the remote control...
Page 15
EN-15 ENGLISH Menu operation * Menus are not displayed when no signal is supplied to the projector. *1 Default setting varies depending on input signals. *2 Available only when the input signal is PC or Video or S-Video 4/5 line component signal. *3 Setting value varies depending on the setting of Image. *4 Only adjustable when Image setting is User. *5 Adjustable range and default setting vary depending on signal type. *6 Not available when the input signal is Video or S-Video. *7 Only...
Page 16
EN-16 Menu operation (continued) Basic operationSeveral settings can be adjusted using the menu. Example : Brightness setting 1. Press the MENU button. 2. Press the S or T button to select Picture. 3. Press the X button. 4. Press the S or T button to select Brightness. 5. Press the W or X button to adjust the brightness. 6. Exit the menu by pressing the MENU button several times Important: • When the button doesnt function, unplug the power cord from the wall outlet. Wait about 10 minutes, plug the...
Page 17
EN-17 ENGLISH Menu operation (continued) 2. Computer Image menuThe projector adjusts the format of the video signal supplied from the computer. However, sometimes images are not projected correctly owing to the type of the computer used. When the image from the computer isnt projected correctly, press the AUTO POSITION button. If the image isnt projected correctly yet, adjust the image from the computer using the menu. In this menu, the setting value is not saved after turning off the projector or when...
Page 18
EN-18 Menu operation (continued) 5. Setting menu 6. Language menu 7. Factory Default menu Menu option Setting Feature description Menu Position 5 options Choose the menu location on the display screen. Mounting 4 optionsAdjust the picture to match the orientation of the projector: upright or upside-down, in front of or behind the screen. Invert or reverse the image accordingly. Logo On, Off Choose to display the logo or not. Signal TypeRGB For VGA signal YCbCr/YPbPr For Component I,P signal Lamp...
Page 19
EN-19 ENGLISH Image adjustment You can adjust projected images by using Picture and Video Image menus. To adjust the brightness and contrast:You can make adjustments of the brightness of the projected image using the menu. (See page 16 for the menu options.) 1. Display the Picture menu. 2. Select Brightness or Contrast by pressing the S or T button. 3. Adjust the selected option by pressing the W or X button. To cancel the menu: 4. Press the MENU button. Brightness Every time the X button is pressed,...
Page 20
EN-20 Lamp replacement This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as pos- sible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector. Contact your dealer for purchase of the lamp. Replace the spare lamp using the lamp attachment unit that is equipped with the spare lamp (separately sold) designed...