Mitsubishi X30 Projector User Manual

E – 29
ENGLISH
⇔ ⇔
Using the Power Saving Function
When there is no signal input for a period of 5 min. or
more, the power is automatically turned off and standby
status is activated.
1With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor $ / % buttons to select “SETUP”.
2When SETUP menu is displayed, use the
cursor { / } keys to select “AU TO
POWER OFF”.
3Use the cursor $ / % keys to set Power
Saving to ON or OFF.
To close the menu...

E – 30
Selecting a Menu Language
Any one of eight different languages can be selected for
menu displays.
1With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor $ / % keys to select “OPTION”.
2When OPTION menu is displayed, use the
cursor { / } keys to select “LAN-
GUAGE”, then press the ENTER button.
3Use the cursor { / } keys to select one
of the following languages.

English

German

French

Italian

Swedish

Spanish

Chinese...

E – 31
ENGLISH
Symptom
The power will not turn on.
No image
Distorted images
Blurred images
Images are offset vertically or
horizontally and are not
correctly displayed
The remote control does not
work
The wireless mouse does not
work
The STATUS indicator blinks
Flickering text or offset colors
with RGB inputProcedure
• Is the power plug connected to the power outlet?
• Is the lamp cover correctly installed?
• Is the internal temperature too high? A protective feature prevents the
power turning on when...

E – 32
Condition
OFF
On Continually
Flashing Very Rapidly (On and off
in a cycle of 1 sec.)
Flashing Rapidly
(On and off in a cycle of 4 sec.)
Flashing Slowly (On and off in a
cycle of 8 sec.)
Flashing Very Slowly (On and off in
a cycle of 12 sec.)Status
Normal
The lamp usage has exceeded 1000 hours of operation and should be replaced.
•The lamp cover is not correctly attached. Replace it correctly.
•The temperature protector has been triggered. If the room temperature is high,
move the unit to a cool...

E – 33
ENGLISH
The rated lamp life is about 1,000 hours. The rated lamp life is the average
life of the lamps produced and tested (under the test conditions of our
company) for a  long term, however, it may become shorter depending on
the conditions of usage.
After the lamp has been operating for 1000 hours or longer, the STATUS
indicator on the control panel will light and the “LAMP USAGE” icon
which shows hours of total lamp usage will be displayed on the screen.
When this happens, turn off the unit...

E – 34
Optical
DMDTMSingle Chip Digital Micro Device (DMDTM)
1024 × 768 dots
Lens Manual focus fixed lens
F=3.0 f=23 mm
Lamp High Performance Compact Lamp
Image Size 914 to 5080 mm (36 to 200 in.) diagonal
Projection Distance 1.2 to 6.8m (3.9 to 22.3 ft.)
Light Output 800 ANSI lumens (normally white)
Contrast Ratio 800 : 1
Electrical
Inputs Video (NTSC / PAL / PAL_M / PAL_N / PAL60 / SECAM / NTSC4.43)
RGB (H:15 to 91 kHz, V: 50 to 85 Hz)
Color Reproduction Full color, 16.7 million colors simultaneously....

E – 35
ENGLISH
Dimensions
OPEN
POWER STATUS
POWER
SOURCE
AUTO
230 mm/9.0″
177 mm/7.0″48 mm/
1.9″11 mm/
0.4″
27 mm/
1.1″ 

Printed in Japan
Manufactured by Mitsubishi Electric Corporation
1 Zusho Baba, Nagaokakyo-City, Kyoto Japan