Mitsubishi X100a Projector User Manual

41
7. Repeat steps 4 to 6 for other images.
8. Choose [
Save presentation...] under the [File] menu.
9. Choose [E
xit] under the [File] menu to quit from PCV.
Editing the presentation
Delete the image
1. Select the image to be deleted.
2. Choose [
Delete image...] under the [File] menu.
Sequencing
A. Exchange images
You can exchange the images among images next to each other.
1. Select an image to be exchanged.
2. Drag the image and drop on the next or previous image.
B. Move images
You can move images...

42
Note: If the only serial port is a “modem/printer”, use it.
Projector + NEC PC 98 and EPSON series Projector + Macintosh Note: If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector,
a 25-pin serial port adapter is required. Contact your dealer for details.
RS-232C cable  RS-232C
adapter for NEC
(option)
to RS-232C terminalto RS-232C terminal
B. PCGC (Personal Computer Graphic Control)
By connecting to personal computer is RS-232C port, you can operate your computer...

43 Installation of software
For Macintosh
1.  Insert the floppy disk of PROJECTOR DRIVER (2/5) PCGC (Mac) to the floppy disk drive.
2.  Copy PCGC” folder to anywhere on the hard disk.
For Microsoft
® Windows®
1.  Start up Microsoft® Windows®.
2. Insert the floppy disk labeled PROJECTOR DRIVER (1/5) PCGC (Win) to the floppy disk drive.
If  you use the Microsoft
® Windows® 95 Operating System or a more recent version
3. Click the [Start] button and select the [Run (
R)] command. Then the  [Run] dialog box...

44
B. Sub menu control window
The window is changed according to the selected position of the main menu selection.
C. Remote control window
CONTRASTPCGC
BRIGHTNESS TINT COLOR
GAMMA CORRECTION
R / G / B
RESET
  0
R / G / B
USER
  0  0  0
Remote
FOCUS/ZOOM ENTER
PinP REAL
AUTO FRAME
CAPTURE
Note:
•When you operate the PCGC, do not use SpacePointer.
•Make sure proper connection shave been made, or else the PCGC will not start up.
•When you operate the PCGC, switch off the menu display on the projector.
When...

45 C. SpacePointer
The remote control provides remote PC operation for presentation from PC. (Space pointer)
Connection
The connection is the same as for PCGC. Refer to page 42.
Installation of software
For Macintosh
1. Insert the floppy disk of PROJECTOR DRIVER (4/5) POINTER DRIVER (Mac) to the floppy
disk drive.
2. Copy Space pointer in the “US” folder to the system folder.
3. Restart the Macintosh.
For Microsoft
® Windows®
1.  Start up Microsoft® Windows®.
2. Insert the floppy disk labeled PROJECTOR...

46
Setting of SpacePointer
You can set the several settings in the Space Pointer control panel in the control panel folder.
SpacePointer
SpacePointer®
Enable/Disable
SLOW
Help Apply
Cancel
OKFAST Enable
ON
COM1 COM2 COM3 COM4Disable
OFF ReceiverCheck
ConnectPort
Port selection
Used to select the port connected to
the projector.
Tracking speed
If you click Fast, the cursor moves
more than twice as fast as you move
the space pointer. When you first try
the remote control, set it to slow.
Uninstallation of...

47 Cleaning the air-filter
Clean the air-filter frequently. If the filter or ventilation slots become clogged with dirt or dust, the
temperature inside of the projector may rise and shut of the power (the thermal indicator starts to
blink red). Caution:
Be sure to turn off the projector and unplug the power cord from the wall outlet before you perform
any maintenance on the projector.
Maintenance
1. Press and raise the air-filter cover with a screwdriver
(-).
2. Wash the air-filter.
Use water or a mild...

48
Replacement of a light source lamp
The light source lamp is designed to project the image on the LCD panel. When the light source lamp
no longer functions, replace it with a new one to ensure optimum performance.
Caution:
•Do not remove the light source lamp from inside of this equipment immediately after using the
projector, you may get burned because of the high temperature of the light source lamp.
•When you replace the light source lamp, press the power button to power off, then wait for 120...

49
4. Hold onto the projector by the handle and insert it securely
into the projector body.
•Be sure that the projector guide is firmly inserted between
the right and left lamp guides.
Do not touch the lamp directly, place a cloth over the
replacement lamp.
Important:
•Replace with same type lamp rated.
•Avoid squeezing the light sources lamp or getting
finger prints on it. Mishandling the lamp can shorten the lamp life, cause it to burst during
operation or reduce its illumination.
5. Tighten up the two...

50
Indicators / TEMP, LAMP, POWER
The projector has three indicators each of which shows the working condition of the projector.
•Though the LAMP and TEMP indicators are on the main menu control window of PCGC, the each
indicator may not match the one of those on the control panel.
INDICATOR
TEMP
INDICATORSHOWS
blinking redCONDITION
•Unusual temperature
Normal
Lamp is almost used up.
•Lamp is used up.
•The power is not turned on.(Power indicator lights up red.)
Standby
Power-on Steady greenSteady...