Mitsubishi X100a Projector User Manual
Here you can view all the pages of manual Mitsubishi X100a Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
21 Projector + AV equipment Make sure that your equipment is turned off before connection. Important: S-video signals take priority over video signals. If you input both S-video signals and normal video signals at the same time, the normal video input automatically shuts off. to audio outputto video output to S-video output to audio outputto video output to S-video output UHF antennaVHF antenna Connect either one of these. Connect either one of these. VCR, othersDVD player, others to audio input 1 to...
Page 22
22 To operate projector power ON POWER red green red LAMP - green - when light source lamp is on when light source lamp does not light up indicator condition stand-by LAMP SOURCEFREEZE /CAPTURE TEMP 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up red. 2. Turn on the equipment connected to the projector. 3. Turn the projector on by pressing the POWER button. The light source lamp starts warming up, eventually turn on. Numbers 1~10 correspond to the...
Page 23
23 4. Select the desired external input source by using the SOURCE button. The source changes in the sequence shown below: •The projector automatically selects the appropriate signal system. When the source is selected to RGB1 or RGB2 and the image is not in the right place, set to display as blightest signal as pos- sible, then press the AUTO button. If the image is still not in the right place, refer to USER PRESETS on page 32. •The projector automatically convert the image into full screen size. By...
Page 24
24 Menu operation Several settings can be adjusted using Menu. There are 5 modes. You can also make adjustments using PCGC (personal computer graphic controller). See pages 42 ~ 44 for details. MENU layers • If the menu operation is not working, simultaneously press the MENU and POWER button. MAIN MENU POINTER CURSOR SELECT SIZE DEFAULT POS CURSOR TRAILS COLOR WIDTH NORMAL CONTRAST BRIGHTNESS TINT COLOR GAMMA CORRECTION ENHANCED IMAGE REVERSE ZOOM/SUPER SOURCE ID BLUE BACK TEST PATTERN AUDIO...
Page 25
25 CONTRAST BRIGHTNESS TINT COLORGAMMA CORRECTION R / G / B RESET 0 R / G / BUSER 0 0 0 HELP NORMAL ENHANCED POINTER AUDIO OPTION QUIT CONTRAST BRIGHTNESS R / G / B 0 R / G / B 0 HELP NORMAL ENHANCED POINTER AUDIO OPTION QUIT CONTRAST BRIGHTNESS R / G / B 0 R / G / B -15 HELP NORMAL ENHANCED POINTER AUDIO OPTION QUIT CONTRAST BRIGHTNESS R / G / B 0 R / G / B 0 HELP NORMAL ENHANCED POINTER AUDIO OPTION QUIT Basic operation EXAMPLE: Brightness adjustment 2, 42, 4 1, 51, 5 LAMP SOURCEMENU...
Page 26
26 NORMAL menu The following adjustments to the projected image can be done in this menu. CONTRAST BRIGHTNESS TINT COLORGAMMA CORRECTION R / G / B RESET 0 R / G / BUSER 0 0 0 HELP NORMAL ENHANCED POINTER AUDIO OPTION QUIT Adjusts the picture contrast. The contrast becomes higher as the number increases. If you wish to select the color, select R/G/B and press the ENTER button. (The R/G/B setting menu will be displayed.) To exit the R/G/B setting menu, select RETURN and press the ENTER button. To...
Page 27
27 GAMMA CORRECTION menu
The proportion of the brightness of input signals to that of output signals can be corrected effectively
by adjusting GAMMA.
1. Select GAMMA CORRECTION of NORMAL menu and then press the ENTER button. (The
GAMMA CORRECTION menu appears on-screen display.)
Horizontal axis: brightness of the input signals
Vertical axis: brightness of the output signals
Inclination: GAMMA
2. Press the ª or º buttons on the control panel (or { or } buttons on the remote control) to
select MASTER.
3....
Page 28
28 ENHANCED menu The following adjustments for enhanced items can be done in this menu. HELPIMAGE REVERSEKEYSTONE OFFON OFF 1 2 3 4 5 MIRROR INVERT INVERT MIRROR SOURCE IDBLUE BACKTEST PATTERNZOOM/ SUPER ZOOM NORMAL ENHANCED POINTER AUDIO OPTION QUITRESETOFFON OFF SUPER IMPOSE 0˚ 3˚ 6˚ 9˚ 12˚ 15˚ Use to reverse or invert the projected image. MIRROR is usedfor rear projection. INVERT is effective when the projector is ceiling-mounted. Adjusts keystone correction of the image. If the image becomes keystone...
Page 29
29
VIDEO11
2
3
4
51
2
3
SOURCE FRAME
POSFRAME
SIZESUPER
IMPOSE
RETURN
RESET
VIDEO2
RGB1
RGB2
PC1
PC2
Selects the desired input source of the sub-image. Select the desired input source
by pressing the ª or º buttons on the control panel (or { or } buttons on the
remote control).
Selects the desired position of the sub-image. Select the desired position by pressing
the ª or º buttons on the control panel (or { or } buttons on the remote con-
trol).
Selects the desired size of the sub-image. Select the...
Page 30
30 POINTER menu
The following adjustments to the cursor and cursor trails can be done in this menu.
SELECT CURSORCURSOR TRAILS
SIZE DEFAULT POS
H-POS
V-POS 50
50COLOR WIDTH
RESET
1
2
3
4
51
2
3
4
5
6
71
2
3
4
5
6 1
2
3
HELP
NORMAL
ENHANCED
POINTER
AUDIO
OPTION
QUIT
Selects the desired color of the cursor. Select the desired color by pressing the ª or
º buttons on the control panel (or { or } buttons on the remote control).
Selects the desired size of the cursor. Select the desired shape by pressing the...