Mitsubishi X100 Projector User Manual

31 OPTION menu
The following adjustments to optional items can be done in this menu.
AUTO POWER OFF PC CARD PLAYSIGNAL RECEIVEUSER PRESETSLANGUAGE
USER
NO
English
Espanol
Deutsche
Francais
ItalianoMANUAL FRONT
REARAUTOAUTO
NTSC
PAL
SECAM
4.43NTSC USER
RESET  30
USER
HELP
NORMAL
ENHANCED
POINTER
AUDIO
OPTION
QUIT
Select either FRONT or REAR to receive the infrared signal from the remote
control.
Use to select the length of time before the projector switches to standby when there
is no input signal...

32 USER PRESETS menu
If you select USER and press the ENTER button, the user setting menu appear.
Use to adjust the horizontal position of the image. The image moves to the right as
the number increases.
Use to adjust the vertical position of the image. The image moves down as the
number increases.
Use to match the clock signals of the projector with the input signal to avoid image
noise such as wide stripes.
Use to adjust the height of the image. The image size grows higher as the number
increases....

33
Advanced feature for presentation
Cursor operation
1. Press the CURSOR button.
The cursor appears on the screen.
• The default position where the cursor appears on the screen can be set by using this on-screen
menu.
2. Press the START/STOP button to ON.
The operation indicator will be illuminated.
(The operation indicator will turn off if the remote control is not used for a period of five minutes.)
3. Move the cursor by using the remote control.
Refer to page 13 for moving the cursor.
4. Press the...

34
Advanced feature for presentation (continued)
Expand
By pressing the EXPAND button on the remote control, you can view the detailed image of the
picture.
1. Press the MENU button once to display the on-screen menu.
2. Press the ª or º buttons on the control panel (or { or } buttons on the remote control) to
select ENHANCED.
3. Press the 
 or buttons on the control panel (or $ or % on the remote control) to select PC
ZOOM/SUPER.
4. Press the ª or º buttons on the control panel (or { or } buttons on the...

35 Super impose (Picture in Picture)
One of the special features of this unit is the picture-in-picture (PinP) mode. PinP allows you to view
different sources at the same time. The sub image will become a still picture.
1. Press the PinP button on the remote control. Pressing the PinP button repeatedly will select on
and off.
•In PinP mode, the sound will be switched off.
•When the main image is set to PC1 or PC2, the main and sub image will become still pictures.
•When the main image and sub image are...

36
PC-CARD
The projector can record one frame at a time and play back an image by using the PC-CARD.
You can also play back the PC-CARD through the personal computer. See pages 39 - 41.
Using the PC-CARD
Use only the flash memory card of PCMCIA•ATA compatible type II.
• Due to PC-CARD type, some images can not be properly recorded.
• Before recording the images into the PC-CARD, prepare the group (GRP0) in the PC-CARD using
the attached utility software PCV (PC-CARD viewer).
Setting up / replacing the...

37
2. Press the MENU button once to display the on-screen menu.
3. Press the ª or º buttons on the control panel (or { or } buttons on the remote control) to
select OPTION.
4. Press the 
 or buttons on the control panel (or $ or % on the remote control) to select PC
CARD PLAY.
5. Press the ª or º buttons on the control panel (or { or } buttons on the remote control) to
select MANUAL.
6. Press the MENU button to exit the menu system.
7. Press the SOURCE button repeatedly until PC-1 (or PC-2) appear on the...

38
Advanced feature with PC
There are three types of application software provided.
1. PCV (PC Card Viewer)
2. PCGC (Personal Computer Graphic Controller)
3. SpacePointer (Driver for PC control by the remote controller)
Environment
The following system software and hardware are necessary to use the projector.
When you use Macintosh
PC Macintosh series loading more than 68030 in CPU and a video card with
which more than 256 colors are available
System software 7.1 or newer
Note: You cannot use the PCV...

39 A. PCV (PC Card Viewer)
PC-CARD viewer (PCV) is a utility software that lets you record and project an  image to a PC-CARD
by using a personal computer.
Installation of software
1.  Start up Microsoft® Windows®.
2. Insert the floppy disk labeled  PROJECTOR DRIVER (5/5) PCV (PC Card Viewer)  in the projec-
tor floppy disc drive.
If  you use the Microsoft
® Windows® 95 Operating System or a more recent version
3. Start up Program Manager.
Click the [Start] button and select the [Run (
R)] command. Then...

40 Recording the image
When you wish to record the image of the display to a PC-CARD.
1. In the PCV main window choose [
Select card drive...] under the [Option] menu and then choose
the PC-CARD drive.
2. Choose [
New presentation...] under the [File] menu.
The new presentation window will open.
3. Choose [
Capture...] under the [Tool] menu.
The PCV windows disappear and the capture dialog box appears.
4. Display the image you wish to record on the screen.
5. Click the capture button.
The Format setting...