Mitsubishi Wd390u Est Projector User Manual

EN-21
How to set the menus
1. Press the MENU button. 
•	 The	Main	Menu	appears	on	the	screen.
Confirm Exit
SelectMENU
Main Menu
opt.
R G BR G B
Pictur e
Video Image
Signal
Audio
Installation
Option
Network Cong
Information
The item being selected is displayed in r ed letters 
on a blue backgr ound.
2. Press the   or  button to select a menu to use. 
Confirm Exit
SelectMENU
Main Menu
opt.
R G BR G B
Pictur e
Video Image
Signal
Audio
Installation
Option
Network Cong
Information
3.  Press the ENTER button...

EN-22
Menu items
Set the following items provided in the respective menus.
Picture menu
Picture
AdjustMENUExit
Select
Image
Brightness
Contrast
Color T
emp.
Color Management
Aspect Ratio
Input Level
3D
3D Sync Invert Auto
Mid
Auto Of f
Of f
Red
Normal
00
ITEMSETTINGFUNCTION
ImageAutoAutomatically sets an optimal color balance based on the input signal. Use this setting for most cases.
TheaterMakes projected images soft and smooth. Best suited for movies.
PresentationMakes projected images bright and...

EN-23
Video Image menu
Video Image
AdjustMENUExit
Select
Color
Sharpness
Tint
0
0
0
ITEMSETTINGFUNCTION
Color±10Adjusts the color tone of projected images. (See page 30.) You cannot select this setting when the Computer1, Computer2 or HDMI is selected as the input source.
Sharpness
±5Adjusts the sharpness of projected images. (See page 30.)
Tint±10Adjusts the color tint of projected images. (See page 30.) You can select this setting only when NTSC is selected as the input signal.
•	 You	cannot	adjust...

EN-24
Signal menu
Signal
AdjustMENUExit
Select
V.
 Position
Fine sync
Computer Input
Overscan
Hold
User
On
OK
Auto 90%
00T racking 0
H. Position 0
User
AdjustMENUExit
Select
Clamp Width
Shutter(U)
Shutter(L)
Shutter(LS)
Shutter(RS)
Of
f
1LPF
00
00
Clamp Position1
ITEMSETTINGFUNCTION
H. Position0-999Select this setting to adjust the horizontal position of projected images.V. Position0-999Select this setting to adjust the vertical position of projected images.Fine sync0-31Select this setting to eliminate...

EN-25
Audio menu
Audio
AdjustMENUExit
Select
V
olume
Audio Input
Auto
16
ITEMSETTINGFUNCTION
Audio InputAutoSelects Audio 1 when the input source is Computer1, selects Audio 2 when the input source is Computer2, selects Audio 3 when the input source is Video/S-Video, and selects HDMI when the input source is HDMI.
Audio 1 / Audio 2 / 
Audio 3Selects audio input.
Mix 
Selects mix signal of Audio 1 and Audio 2. You can change the balance of 
Audio 1/Audio 2 using Mix .
Volume 0-21Adjusts the volume of the...

EN-26
Installation menu
Installation
AdjustMENUExit
Select
Menu Position
Image Reverse
Auto Power On
Auto Power Of
f
Auto Keystone
Language
Reset All Upper Left
Off
Of f
English
Of f5Min
Standby Mode LowLamp ModeStandar
d
E-Zoom/Shift
OK
OK
ITEMSETTINGFUNCTION
Menu Position5 optionsUse this setting to change the position of the menu on the screen.
Lamp ModeStandardSelect this option when you want to view images in a well-lit room.
LowSelect to moderate the intensity of the lamp. The operating sound is...

EN-27
Option menu
Option
AdjustMENUExit
Select
Passwor
d
WXGA
Set Up
Image Captur e
Splash Scr een
Back Color
AV  Mute Mode Of
f
Original Blue
BlackOf f
Auto
Video Signal AutoCinema ModeAuto
Closed CaptionOK
OK
ITEMSETTINGFUNCTION
PasswordOK Use this setting to activate or deactivate the password lock.
Cinema ModeAuto / OffSelect Auto to automatically activate the film mode when the input video signal is a video signal from a film.
Video Signal8 optionsSelect Auto to automatically set the appropriate...

EN-28
Network Config menu
Network Cong
AdjustMENUExit
Select
Pr
ojector Name
Network Certication
Network Passwor d
IP Cong
Wir eless Setting
AMX Device Discovery
Network Initialization
Network Restart
OK
SET
OK
OKOK
OK
Wir eless Setting
AdjustMENUExit
Select
SSID
Channel
Encryption
Wir
eless Setup
OK
Auto
Of f
MENU
IP Cong
Adjust Exit
Select
DHCP
IP Addr
ess
Subnet Mask
Default Gateway
MAC Addr ess
DHCP Function
Start IP Addr ess
End IP Addr ess
IP Cong Setup
On
OK
xx-xx-xx-xx-xx-xx Of f
169-
-
-255
169...

EN-29
Information menu
Information
MENUExit
Lamp Time
H. Fr
equency
V.  Fr equency
Sync. T ype 2000H
60.00 kHz 60.00 Hz 3Wir e
Resolution
1024x768
Input
Computer1
ITEMDESCRIPTION
Lamp TimeThis menu shows a lamp operating time (hour) calculated assuming that \
Lamp Mode is Low. 
•	 When	the	Lamp	Mode	is	Standard,	this	menu	shows	a	longer	lamp	operating	time	than	the	
actual time. (See page 59 for the interval of lamp replacement.)
InputIndicates the name of the terminal to which the currently projected...

EN-30
To adjust the tone of white (Color 
Temp.): 
You can select a preset color temperature (white tone) 
using the menu. 
(See page 21 for menu setting.) 
1. Display the Picture menu. 
2. Select Color Temp. by pressing the  or  button. 
3. Select your desired color temperature by pressing 
the  or  button. 
To cancel the menu:
4. Press the MENU button. 
To adjust the tone of white (To customize 
the color temperature): 
To set (and store) a user-defined color temperature, 
perform the following...