Mitsubishi Wd390u Est Projector User Manual

WD390U-EST
This User Manual is important to you.
Please read it before using your projector.
DLP™ PROJECTOR
MODEL
WD390U-EST
User Manual 

EN-2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert 
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure 
that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an...

EN-3
Contents
Important safeguards ........................................................................\
................................................4
Overview ............................................................................................\
................................................6
Remote control  ...........................................................................................\
.......................................8
Installation...

EN-4
Important safeguards
Please read all these instructions regarding your 
projector and retain them for future reference. Follow 
all warnings and instructions marked on the projector.
1. Read instructions
 All the safety and operating instructions should be 
read before the appliance is operated.
2. Retain instructions
 The safety and operating instructions should be 
retained for future reference.
3. Warnings
 All warnings on the appliance and in the operating 
instructions should be adhered to.
4....

EN-5
Important safeguards (continued)
WARNING:
Unplug immediately if there is something wrong 
with your projector.
Do not operate if smoke, strange noise or odor comes 
out of your projector. It may cause fire or electric 
shock. In this case, unplug immediately and contact 
your dealer.
Never remove the cabinet.
This projector contains high voltage circuitry. An 
inadvertent contact may result in an electric shock. 
Except as specifically explained in User Manual, do 
not attempt to service this...

EN-6
8105
2
1
34
9
7
6
64 2
89 531
7
1  FOCUS ring
2 Lamp cover
3 Control panel
4 Intake vent
5 Remote control sensor (front)
6 Exhaust vent
7 Terminal panel
8 Speaker
9 Adjustment feet
10 Lock bar
Caution:
•	 Do	not	replace	the	lamp	immediately	after	using	the	
projector because the lamp would be extremely hot 
and it may cause burns.
Control panel
1 POWER button (ON/STANDBY)
The status is changed between ON and STANDBY.
2 POWER indicator
3 MENU button
4 STATUS indicator
5 KEYSTONE/ENTER button
6 AUTO...

EN-7
1
Overview (continued)
Bottom side
1 Adjustment feet
ON
ASPECTMA GNIFY
KEYST ONE VO
L
UP
3DDO WN
STANDBY
MENU
FREEZE
AU
TO
PO SITION
AV
MUTE
ENTER
1
2COMPUTER VIDEO
VIEWER
UNPLUGS-VIDEO
USB DISP.
LAN DISP.DVI HDMI
1
2
3
4
5
6
7
10
11
8
9 18
19 15 14
16
17
20
12
13
Remote control
1 
ON button
2 MAGNIFY button
3 VOLUME UP, DOWN buttons
4 KEYSTONE button
5 MENU button
6 ENTER button
7 AV (Audio/Video) MUTE button
8 VIEWER button
9 UNPLUG button
10 USB DISP. button
11 LAN DISP. button
12 STANDBY button...

EN-8
Remote control
Battery installation
Use two (AA, R6) size batteries.
Inserting the batteries into the remote control
1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the 
arrow.
2.	 Load	the	batteries	making	sure	that	they	are	positioned	correctly	(+	to	+,	and	-	to	-).
•	 Load	the	batteries	from	-	spring	side,	and	make	sure	to	set	them	tightly.
3. Replace the back cover.
Removing the batteries from the remote control
Remove the back cover of...

EN-9
Screen size and projection distance
Refer to the following tables to determine the screen size and projection distance.
•	 The	figures	in	the	tables	are	approximate	and	may	be	slightly	different	from	the	actual	measurements.
SH
Hd
L
SW
A
A=BB
Screen size (16:10)Projection distance: LHdDiagonal sizeWidth: SWHeight: SH
inchcminchcminchcminchminchcm70178591513794220.564.612802036817242108250.645.313
1002548521553135320.826.617...

EN-10
Installation (continued)
Front projection, ceiling mounting
For ceiling mounting, you need the ceiling mount 
kit designed for this projector. Ask a specialist for 
installation. For details, consult your dealer.
•	 The	warranty	on	this	projector	does	not	cover	any	
damage caused by use of any non-recommended 
ceiling mount kit or installation of the ceiling mount 
kit in an improper location.
•	 When	using	the	projector	mounted	on	the	ceiling,	
set Image Reverse in the Installation menu to Mirror...