Mitsubishi Sl1u Projector User Manual
Here you can view all the pages of manual Mitsubishi Sl1u Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
´EN – 11 ENGLISH LS-VIDEO VIDEO AUDIO IN VIDEO INMAIN AC IN R COMPUTER INRS-232C COMPUTER OUT AUDIO OUT MONITOR OUTPUT to COMPUTER IN to AUDIO INto monitor port to COMPUTER OUT to PC audio output PC audio cable (option) When outputting to both a PC monitor and the projector.RGB cable for PC RGB cable for PC (option) computer Projector + Personal computer Important: •When you use a long RGB cable instead of the cable provided, the picture quality may be deteriorated. •Connectors or analog RGB output...
Page 12
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector. 2. Connect the power cord to the wall power outlet. 3. Remove the lens cap. Warning: •Do not look directly into the lens when projector is “ON”. •The lens cap is for protecting the lens. If you leave the power on with the cap on, the cap may be warped. Please remove the lens cap when you turn the power on. •This projector is equipped with the power cords...
Page 13
´EN – 13 ENGLISH To operate projector power ON •When the lamp indicator is blinking red, the lamp should be replaced. Replace the lamp. See pages 21 and 24. •The picture might not be of optimum performance in extreme hot or cold conditions. (The projector is not malfunctioning.) 4. Select the desired external input source by using the COMPUTER or VIDEO buttons. •Pressing the VIDEO button repeatedly will select VIDEO IN and S-VIDEO IN. •The COMPUTER or VIDEO buttons do not work when MENU is displayed....
Page 14
EN – 14 30 To operate projector power ON (Continue) Turning off the projector 7. Press the POWER button. The message “POWER OFF? YES : PRESS AGAIN” appears on the screen. •To exit from this mode, press any button except POWER, STILL and VOLUME + and - buttons. 8. Press the POWER button again. The light source lamp will be turned off. Pressing the POWER button second time will shut off the light source lamp, but the exhaust fan con- tinues to operate for 60 seconds to cool down the light source lamp...
Page 15
EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the INSTALLA-
TION menu.
3. Press the ENTER button (or } button).4. Press the { or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, press the
RESET button on the terminal...
Page 16
EN – 16 FEATURE XGA60 MENU POSITION1. EXPAND MODE 1.AA RESET ALLEnglish LANGUAGEAË ANAMORPHIC OFF VIDEO SIGNAL AUTO? OK AUDIO MODECOMPUTER VIDEO opt. IMAGE REVERSE OFF AUTO POWER ONOFFAUTO POWER OFF IRIS OFF KEYSTONE ON INSTALLATION ON STANDARD BACK COLOR OFF BLUE XGA60 LAMP MODE SPLASH SCREEN 0˚ opt. 1 IMAGE CONTRAST.........Adjusts the picture contrast. The contrast becomes higher as the number increases. BRIGHTNESS.....Adjusts the image brightness. The image becomes brighter as the number...
Page 17
EN – 17 ENGLISH CLAMP POSITION SIGNAL-USER 0 CLAMP WIDTH 0 HORIZ. PIXELS 0 SHUTTER(RS) 0 VERT. LINES 0 VERT. SYNC. AUTO SHUTTER(LS) 0 SHUTTER(L) 0 SHUTTER(U) 0 MEMORY CALL SIGNAL AUTO HORIZ. POSITION 0 VERT. POSITION 0 TRACKING 0 COMPUTER INPUT RGB FINE SYNC. 0 HOLD AUTO USERMEMORIZEDELETE DEFAULT R G BR G B A U XGA60opt. VIDEO SIGNAL ... When AUTO is selected, the appropriate video format is automatically selected depending on the input signal. If the image isn’t displayed correctly, select the desired...
Page 18
EN – 18 Adjusting the image You can adjust the picture by using the IMAGE menu. To control the level of white-to-black in the image : Adjust CONTRAST in IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. To control the light level of the image : Adjust BRIGHTNESS in IMAGE menu. Press the % button to lighten the image and the $ button to darken the image. To determine the intensity of the color : Adjust COLOR in IMAGE menu. Press the % button to increase the amount...
Page 19
EN – 19 ENGLISH Adjustment from personal computer Although this projector sets proper signal systems automatically for the image signal from personal computers, it cannot be applied to some of personal computers. In this case, press the AUTO POSITION button. If the images are still not projected correctly, use the MENU display to adjust the projected im- ages. Image moved to right or left : Adjust HORIZ. POSITION in SIGNAL menu. Press the % button to move the image to left. Press the $ button to move...
Page 20
EN – 20
Advanced features for presentation
Expand
By pressing the EXPAND button on the remote con-
trol, you can magnify the detailed image of the picture.
Using the Expand mode
1. Press the EXPAND button.
• You can magnify different areas of the active pic-
ture by pressing the {, }, $, % button.
• You can change the magnification of the zoomed area
by pressing the + or - button.
2. Press the EXPAND button on the remote control
again.
The normal screen display will appear on the screen.
• Display...