Mitsubishi Sd220u Projector User Manual
Here you can view all the pages of manual Mitsubishi Sd220u Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
EN-21 ENGLISH Menu operation (continued) 3. FEATURE menu You can select CINEMA MODE only when the input signal is a TV60, TV50, 480i, or 576i video signal. Menu option Setting Fe ature description ASPECT NORMAL Automatically sets the aspect ratio in relative to the input signal. Use this setting for most cases. 16:9 Selects a desired screen position for anamorphically squeezed or hor- izontally compressed images stored on DVD disks. You can select from CENTER, UPPER, and LOWER by pressing the ENTER...
Page 22
EN-22 Menu operation (continued) 4. SINGAL menu Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction. When you change the value of the horizontal or vertical position drastically, noise may appear. The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary ev en when the value is changed. These conditions are not a malfunction. SHUTTER does not work correctly during keystone...
Page 23
EN-23 ENGLISH Image adjustment Adjusting projected images To adjust the brightness (CONTRAST and BRIGHT- NESS): You can make adjustments of the brightness of the projected image using the menu. (See page 17 or 19 for the menu options.) 1. Display the QUICK MENU or the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the S or T button. 3. Adjust the selected option by pressing the W or X button. To cancel the menu: 4. Press the MENU button. CONTRASTSelect to adjust the contrast of the image....
Page 24
EN-24 Image adjustment (continued) BrilliantColorTM Use this setting to make colors with medium brightness, such as yel- low and the skin tone appear natural. Press the W button to decrease the value to lessen the effect. Press the X button to increase the value to heighten the effect. (BrilliantColor TM has no effect at value 0.) 6. Select a value by pressing the W or X button. For more enhanced color reproduction, set BrilliantColor TM to 0. The white area of the color wheel is disabled, and...
Page 25
EN-25 ENGLISH Advanced features Freeze To stop the motion in the image temporarily (or to dis- play a still image): Press the FREEZE button on the remote control. The image freezes temporarily. To resume the motion in the image:Press the FREEZE button on the remote control again. Important: Do not keep displaying a still picture for an extended period of time, as the afterimages may linger on the screen. Password functionThis projector provides the password function that is intended to pre- vent wrong...
Page 26
EN-26 Lamp replacement This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possi- ble. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector. Cont act your dealer for purchase of the lamp. Replace the spare lamp using the lamp attachment unit that is equipped with the spare lamp (separ ately sold) designed...
Page 27
EN-27 ENGLISH Lamp replacement (continued) 5. Remove the lamp attachment unit. Pull the lamp unit out of the projector slowly. If it is pulled out quickly, the lamp may break, scattering glass fragments. Do not spill liquid on the removed lamp unit or do not place it near any flammable object or where children can reach to pre- vent injuries or fire. When the projector is mounted to the ceiling: Confirm that the lamp unit (j) is se curely held inside the lamp dispos- able bag of the lamp attachment...
Page 28
EN-28 Troubleshooting Before asking for repair of the projector, check the following. If the symptom persists, stop using the projector, be sure to unplug the power plug, and then contact your dealer. No image appears on the screen. ProblemSolution Power can not be turned on. Check whether the indicators are on or off and how they are lightning. No image appears on the screen. Cancel the AV mute by pressing the AV MUTE button. It may take about 1 minute for the lamp to light up. The lamp fails...
Page 29
EN-29 ENGLISH Troubleshooting (continued) Images are not displayed correctly. ProblemSolution Projected images are shaking. Projected images are displaced. Check that the cable connected to the external device isn’t intermittent. Connect the cable’s plug with the external device’s connector firmly. Press the AUTO POSITION button. Some computers output out-of-spec signals on rare occasion. Adjust the SIGNAL menu. (See page 24.) When the input signal is a WXGA video signal, confirm the setting...
Page 30
EN-30 Troubleshooting (continued) Others If the following problem occurs after the lamp is replaced, check the following first. Maintenance Warning:Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols when cleaning the projector body and lens. Flammable substances may ignite causing fire or breakdown while the lamp is illuminating. Caution: Be sure to turn off the lamp and unplug the power cord from the wall outlet before you perform any maintenance on the projector ....