Mitsubishi S290u Projector User Manual
Here you can view all the pages of manual Mitsubishi S290u Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
EN – 21 ENGLISH Mouse remote control By connecting to personal computer through the USB, PS/2 or ADB port, you can operate your computer with the projector remote control. Connection Projector + PC with USB connector Operation Projector + Macintosh •Turn off personal computer and the projector before connecting with PS/2 port or ADB port. If connecting the personal computer with the projector when the personal computer is on, the remote control does not work as a mouse. In that case, restart the personal...
Page 22
EN – 22 The lamp is designed to project the image on the LCD panels. When the lamp no longer functions, replace it with a new one. Caution: •Do not remove the lamp immediately after using the projector, you may get burned because of the high temperature of the lamp. •When you replace the lamp, press the power button to power off, then wait for 120 seconds in stand-by mode to allow the lamp and LCD panels to cool. Turn off the main switch, unplug the power cord from the outlet, and wait one hour so that...
Page 23
EN – 23 ENGLISH Maintenance Caution: Be sure to turn off the projector and unplug the power cord from the wall outlet before you perform any main- tenance on the projector. Cleaning the air-filter This projector has two air-filters, for bottom air-outlet slots and for front air outlet slots. Clean the air-filter frequently. If the filter or ventilation slots become clogged with dirt or dust, the temperature inside the projector may rise and shut off the power (the TEMP indicator starts to blink red). For...
Page 24
EN – 24 Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. CAUSE •The air inlet slots, outlet slots or air filter is clogged with dust or some objects. POWER indicator does not light up. •Power cord is unplugged from the outlet. •Power cord is disconnected from the projector. •The main switch is turned off. •The lamp lid is open. POWER indicator blinks red. •The projector has been turned...
Page 25
EN – 25 ENGLISH Indicators The projector has three indicators each of which shows the working condition of the projector. The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your dealer. POWER indicator LAMP indicator TEMP indicator LAMP VOLUMEZOOM/ FOCUSTEMP VIDEO ENTER COMPUTER MUTE AUTO POSITION MENU Normal condition Abnormal condition Steady red Steady green Steady greenBlinking green Steady green POWER LAMP TEMPCONDITION Notes The POWER...
Page 26
EN – 26 Specifications LCD projector S290U AC100 - 240V, 50 / 60Hz 2.9 A 1.3-inch LCD panel: 3 pieces (for R, G, B) Pixels 800 × 600 = 480,000 pixels Total 1,440,000 pixels Active pixel rate: 99.99 % or more (each panel) 16,770,000 colors F 1.8 - 2.2 f = 52 ~ 66 mm 190 W NSH 40 - 300 inch (aspect ratio 4:3) Resolution : 640 x 400 - 800 x 600 + Compressed 1024 x 768 Sync on Green available NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60 DVD (Component) / HDTV (1080i) 2 W stereo 6 cm...
Page 27
EN – 27 ENGLISH 1 Remote control 939P790-40 1 Remote control cable 246C217-30 1 User’s manual 871D344-10 1 Quick reference card 857B017-10 2 Battery for remote– Connectors PC analog RGB input Use to input video signals (analog RGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) PIN NO. SPEC PIN NO. SPEC 1 R(RED)/CR9– 2G(GREEN)/Y10 GROUND 3B(BLUE)/CB11 GROUND 4 GROUND 12 – 5 GROUND 13 HD/CS 6 GROUND 14 VD 7 GROUND 15 – 8 GROUND RS-232C input Use to control the projector with the personal...
Page 28
Printed in Japan 871D344A10 Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan