Mitsubishi S120 Projector User Manual

1
ENGLISH
S 12 0
LCD
Projector
User Manual
MODEL   LVP-S120A
FRANÇAIS
ESPAÑOL
APPENDIX 

2
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock.
The exclamation point within an equilateral...

3
ENGLISH
Contents
Important safeguards ........................................................................... 4
Overview of the projector ...................................................................... 6
Overview of the remote control ............................................................ 8
Battery installation ............................................................................................. 9
Preparing the projector for operation...

4
Important safeguards
PLEASE READ ALL THESE INSTRUCTIONS RE-
GARDING YOUR LCD PROJECTOR  AND RETAIN
THEM FOR FUTURE REFERENCE. FOLLOW ALL
WARNINGS AND INSTRUCTIONS MARKED ON
THE  LCD PROJECTOR.
1. Read instructions
All the safety and operating instructions should
be read before the appliance is operated.
2. Retain instructions
The safety and operating instructions should be
retained for future reference.
3. Warnings
All warnings on the appliance and in the oper-
ating instructions should be adhered to....

5
ENGLISH
WARNING:
Unplug immediately if there is
something wrong with your projector.
Do not operate if smoke, strange noise or odor comes
out of your projector. It might cause fire or electric
shock. In this case, unplug immediately and contact
your dealer.
Never remove the cabinet.
This projector contains high voltage circuitry. An
inadvertent contact may result in an electric shock.
Except as specifically explained in the Owners
Guide, do not attempt to service this product
yourself. Please contact...

6
Overview of the projector
RGB LAMP
TEMP
CARDSOURCEMENU
ENTER
VOL
VIDEO
PC CARD
handle
Hold here to carry this projector.
remote control sensor (Front / Rear)
input source (RGB, VIDEO, PC CARD)
Use to select the input source you wish to watch. You can select PC CARD when 
the CARD indicator ON.
menu
Use to project menu display. 
direction
VOL +, -
Press to turn the volume up or down.  During playback 
of PC card, use to select group of the PC card.
 release button
Press to adjust the angle of...

7
ENGLISH
PC analog RGB input
Use to input video signals (analog
RGB) of a personal computer.
(Pin assignment of Mini D-SUB 15P jack)
PIN NO. SPEC PIN NO. SPEC
1 R(RED)/CR9–
2G(GREEN)/Y10 GROUND
3B(BLUE)/CB11 GROUND
4 GROUND 12 –
5 GROUND 13 HD/CS
6 GROUND 14 VD
7 GROUND 15 –
8 GROUND
15
1115
RS-232C input
Use to control the projector with the
personal computer, or control the per-
sonal computer with remote control. Use
the provided RS-232C cable (Mini DIN
8P– D-SUB 9P) for the connection.
PIN NO. NAME...

8
Overview of the remote control
card auto play 
Press to start auto play function of the 
PC CARD. See page 24.  The buttons with 
*mark work as same 
as the buttons on the projector.
PC card release
Press this button to be able to eject PC 
card. Make sure to press this button all the 
time to eject the PC card. See page 23. 
* input source
still
Use to freeze the image. See page 22.
* power
right click
This operates in the same way as the right 
button on the computer mouse. 
See page 31.
* direction...

9
ENGLISH
Battery installation
Use two AA size batteries.
1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the
arrow.
2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -).
3. Replace the back cover.
Important:
•Do not use a new battery with an old one.
•Load batteries in the correct position.
•Do not heat, take apart, or throw batteries into fire.
•Do not try to recharge batteries.  Do not use rechargeable...

10
Preparing the projector for operation
Orientation of the projector
Picture size can be set by changing the distance between the screen and the projector.
Front projection
To find the approximate distance
between the projector and screen:
Multiply the width of the screen
✕ 2.0 (max.) , Multiply the width of
the screen ✕ 2.5 (min.).
• Refer to the chart to recom-
mended distances in maximum
zoom and minimum zoom.
Diagonal size
 (inch)
23 
40 
60 
80 
100 
150 
200 
245 
Height inches
 (inch)
13.8 
24...