Mitsubishi Projector Xd1000u User Manual

EN-31
ENGLISH
Supervising and controlling by computer
You can supervise and control the projector’s operation using a personal computer via a LAN network. 
•  To supervise and control the projector, install the software “Mitsubishi Projector Control Device Installer *” con-
tained in the attached CD-ROM. For the installation procedure and usage of the software, see “Operation manual 
for LAN control utility” contained in the attached CD-ROM. 
 *) Functions
•  Setting of the projector’s IP address
•...

EN-32
Replacing the lamp
This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness 
may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to replace the 
lamp with a new lamp separately sold that is exclusive to this projector. Contact your dealer for purchase of the lamp. 
WARNING:
•  Be careful not to drop the lamp fi xing screws into the inside of the projector. Don’t put a metal piece or fl...

EN-33
ENGLISH
To replace the lamp: 
1.  Reverse the projector gently.
2.  Loosen the screw (a) using a Phillips screwdriver (+), and 
remove the lamp cover (b).
3.  Loosen the screws (c) using a Phillips screwdriver (+).
4.  Pull up the handle. 
5.  Pull out the lamp box by the handle while holding the 
projector.
•  Pull the lamp box out of the projector slowly. If it is 
pulled out quickly, the lamp may break scattering glass 
fragments. 
•  Do not spill liquid on the removed lamp box or do not 
place...

EN-34
POWER
Off
Steady red
Blinking 
red / green
STATUS
Off
Off
Blinking 
orange
Blinking 
green
Steady red
Off
Steady
or
Blinking
  Solution
•  Connect the power cord to the projector. 
• Plug the power cord into a wall outlet. 
•  If any objects are blocking the air inlet or outlet grille, remove them and carry 
out the following.
1.  Turn off the main power swich.
2.  Make sure that the projector has cooled off. 
3.  Turn on the main power swich.
4.  Press the POWER button.
•  If any objects are...

EN-35
ENGLISH
Images are not displayed correctly. 
Problem
Projected images are 
shaking.
Projected images are 
displaced. 
Projected images are 
distorted. 
Projected images are 
dark. 
Projected images are 
blurred. 
White dots are seen 
on projected images. 
Black dots are seen on 
projected images. 
Rainbow effect is seen 
on projected images. 
Fine streaks are seen 
on projected images. 
Projected images 
become wavy. 
Hue is not appropriate. 
Tint in projected 
images is incorrect.
Only the motion...

EN-36
Others
Problem
The exhaust vents 
emit warm air.
No audio is output. 
The menu can't be 
used. 
“TEMPERATURE!!” is 
displayed.
The 
 mark appears. 
The remote control 
doesn't function easily 
or at all.
The buttons on the 
control panel (except 
for the POWER 
button) don’t function. 
Abnormal sound is 
heard. Solution
•  This air comes out after cooling the inside of the projector. You may feel hot, but this is 
not a malfunction. 
•  Check that the volume isn't set to low. 
•  The...

EN-37
ENGLISH
Indicators
POWER
Steady 
green
or
Steady red
Steady red
Steady 
green
Steady red
Steady red
Blinking 
green/red
Blinking 
green/red
STATUS
Blinking orange
Blinking green
Blinking green/red
Blinking red
Steady red
Off
Steady
or
Blinking
CONDITION
Abnormal temperature
• The ventilation grilles are clogged with dust or dirt.
• The room temperature is high.
The protection circuit is working or the lamp is in an
abnormal condition. 
Lamp operation time warning. (Total lamp operation time...

EN-38
Speci cations
The specifi cations and outside appearance of the projector are subject to change without prior notice.
*1 : Wireless LAN unit isn’t packaged together with the projector.
Replacement part
(Option / Not included in the box)
Spare lamp                (VLT-XD2000LP)
Type  
Model 
Display Technology
 
Projection lens 
Light-source lamp 
Image size (Projection distance)
Maximum  
resolution Computer signal
 
Video signal 
Component  
signal
 
Computer/Component video input 
 
Video input...

EN-39
ENGLISH
 TV60, 480i(525i) -  15.73  59.94  1024 x 768  -  *1, *3
  TV50, 576i(625i)  -  15.63  50.00  1024 x 768  -  *1, *3
  1080i 60 (1125i 60)  -  33.75  60.00  1024 x 576  -  *1, *2
  1080i 50 (1125i 50)  -  28.13  50.00  1024 x 576  -  *1
  1080i 50a (1250i 50)  -  31.25  50.00  1024 x 576  -  *1
  480p (525p)  -  31.47  59.94  1024 x 768  -  *1, *2
  576p (625p)  -  31.25  50.00  1024 x 768  -  *1, *2
  720p 60 (750p 60)  -  45.00  60.00  1024 x 576  -  *1, *2
  720p 50 (750p 50)  -  37.50...

EN-40
 1  R(RED)/CR 2 G(GREEN)/Y
 3 B(BLUE)/CB
 4  GND
  5  GND   
  6  GND   
 7  GND
  8  GND    
 9  DDC 5V
 10  GND 
 11  GND 
 12  DDC Data
 13  HD/CS
 14  VD
 15  DDC Clock  1 
- - 2  TXD  IN 
 3  RXD  OUT
 4 
-   - 
 5  GND  - 6 - - 7 - - 
 8 - -
 9 - -
1 5
116 10
15SERIAL (D-SUB 9-pin)
  Pin No.  Name  I/O
COMPUTER IN / COMPONENT VIDEO IN
(Mini D-SUB 15-pin)
 Pin No.  Spec.
DVI-D (HDCP)
(DVI-D 24-pin)
 PIN No. SPEC PIN No. SPEC
 1  DATA 2-  13 - 2  DATA 2+ 14 +5V Power
  3  DATA 2 Shield 15...