Mitsubishi Projector Xd1000u User Manual

EN-21
ENGLISH
Setting the aspect ratio
You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the 
setting according to the type of the input video signal. 
How to change the settings:
With the remote control:
1.  Press the ASPECT button. 
•  Every time the ASPECT button is pressed, the aspect mode changes from AUTO to 16:9, to REAL, and back to 
AUTO. 
•  When the keystone adjustment is applied, the REAL mode can not be selected.
With the FEATURE...

EN-22
Menu operation
•  Menus are not displayed when no signal is supplied to the projector. 
* 1: Not available when COLOR ENHANCER is set to sRGB.
* 2: Not available with certain signals.
* 3: Available only when the input signal is TV50, TV60, 480i or 576i.
* 4: Available only when the source is a COMPUTER/COMPONENT 
VIDEO IN-1.
* 5: Setting range differs depending on the input signals.
* 6: Not available when the source is VIDEO IN or S-VIDEO IN.
How to set the menus:
Following describe how to set...

EN-23
ENGLISHIMAGE
opt.
CONTRAST
BRIGHTNESS0
0
STANDARD
0 0
0 COLOR
TINT
SHARPNESS
COLOR TEMP.
AUTO COLOR
ENHANCER
XGA60INSTALLATION
opt.
ONSPLASH 
SCREENAUTO POWER 
OFF
BACK COLOR
LAMP MODE
OFF OFF
ON
BLUE AUTO POWER 
ONSTANDARD
OFF IMAGE 
REVERSE
XGA60
TEST PATTERNCROSS HATCH
ZOOM/FOCUS 
LOCK
OFF OFF
LENS SHIFT LOCKLENS SHIFT 
RESETOK
FEATUREAUTO
XGA60
AUTO
opt.
MENU POSITION
VIDEO SIGNAL?
ASPECT
RESET ALLEnglish
LANGUAGEAËOK
SCART INPUT
DISPLAY INPUT PASSWORD
FUNCTION
CINEMA MODEAUTO1.
SET UP
AUTOOFF...

EN-24
3. FEATURE menu
ITEM SETTING FUNCTION
ASPECT  AUTO  Select to change the aspect ratio automatically depending on the input signal.   
(Select this option for normal use.) 
 16:9 
  This option allows you to select the display position of squeezed (or horizontally 
compressed) images stored on DVD discs. By pressing the ENTER button, you 
can select the display position among CENTER, UPPER, and LOWER.
  REAL  Select to project images in their original size as input. Not available when the 
keystone...

EN-25
ENGLISH
Adjusting projected images
To adjust the brightness (CONTRAST and BRIGHTNESS):
You can make adjustments for the brightness of the projected image using the menu. 
(See page 22 for menu setting.) 
1.  Display the IMAGE menu. 
2.  Select CONTRAST or BRIGHTNESS by pressing the 

 or 
 button. 
3.  Adjust the selected item by pressing the 
 or 
 button. 
To cancel the menu:
4.  Press the MENU button. 
CONTRAST 
Select to adjust the contrast of the image. Every time the 
 button is pressed,...

EN-26
To adjust the tone of white (COLOR TEMP.): 
You can select a preset color temperature (white tone) using the menu. 
(See page 22 for menu setting.) 
1.  Display the IMAGE menu. 
2.  Select COLOR TEMP.  by pressing the 

 or 
 button. 
3.  Select your desired color temperature by pressing the 
 or 
 button. 
To cancel the menu:
4.  Press the MENU button. 
To adjust the tone of white (To customize the color temperature): 
To customize (and store) the color temperature to your preference, carry out...

EN-27
ENGLISH
This projector automatically and properly projects video signals supplied from the computer. However, some video 
signals may not be projected, depending on the type of the computer. In such a case, press the AUTO POSITION 
button. (See page 16.) When the signal is still not projected properly, adjust the projected image using the SIGNAL 
menu. 
How to adjust the image supplied from the computer using the menu:
Carry out the following procedures according to the symptoms. 
Wide strips...

EN-28
MENU ACCESSFEATURE
XGA60opt.
LOCK
UNLOCKOK
OK
PASSWORD
CONFIRM
O K CANCEL
MENU ACCESSFEATURE
XGA60opt.
LOCK
UNLOCKOK
OK
PASSWORD
O K CANCEL
Password function
This projector is equipped with the password function 
that is designed for prevention of wrong operation by 
children and restriction on operation by other than 
specifi ed users. 
DISPLAY INPUT ...........When the projector is turned 
on, the startup screen (or splash screen) will appear 
and stay on the screen until the password is entered....

EN-29
ENGLISH
Expand
By pressing the EXPAND button on the remote control, 
you can magnify the image to view the details.
Picture in Picture (PinP) 
One of the special features of this projector is the 
picture-in-picture (PinP) mode. The PinP mode allows 
you to view the images from  different sources at the 
same time. 
To use the PinP mode
1.  Press the PinP button on the remote control. 
•  When you press the PinP button with the image 
from the COMPUTER/COMPONENT VIDEO IN (1 
or 2) terminal...

EN-30
Mouse remote control
By connecting to personal computer through the USB port, you can operate your computer with the projector remote 
control. 
Projector + computer with USB connector
Operation
•  You can use the mouse remote control function with a computer supporting USB only. 
•  When the lamp is turned ON, the computer connected with the USB cable may not work correctly. In this case, 
restart the computer.
•  The mouse doesn’t function for a while after the power is turned on. 
Mouse pointer...