Mitsubishi Mdt461s Users Manual

1-31 
English-30
Controlling the LCD monitor via RS-232C Remote Control
This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
Functions that can be controlled by a personal computer are:
• Power ON or OFF
• Switching between input signals
Connection
LCD Monitor + PC
NOTE:If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter
is required. Contact your dealer for details.
* RS-232C OUT terminal can...

1-32 
English-31
English
3) Control sequence
(1) The command from a computer to the LCD monitor will be sent in 400ms.
(2) The LCD monitor will send a return command 400ms* after it has received and encoded. If the command isn’t
received correctly, the LCD monitor will not send the return command.
(3) The personal computer checks the command and confirms if the command, which has been sent, has been executed or not.
(4) This LCD monitor sends various codes other than return code. When having a control...

1-33 
English-32
Features
Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight
limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another.
Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a
variety of standards.
Natural Color Matrix color matching Control System with sRGB: Combines Six-axis...

1-34 
English-33
English
Troubleshooting
No picture
• The signal cable should be completely connected to the display card/computer.
• The display card should be completely seated in its slot.
• Front Power Switch and computer power switch should be in the ON position.
• Check to make sure that a supported mode has been selected on the display card or system being used.
(Please consult display card or system manual to change graphics mode.)
• Check the monitor and your display card with respect to...

1-35 
English-34
Specifications for MDT402S
Product SpecificationsAnalog Input Digital Input
LCD Module 40" / 101.6cm diagonal
Pixel Pitch: 0.648mm
Resolution: 1366 x 768 dots
Color: Over 16 million colors (depending on video card used)
Brightness: 450cd/m
2(Typ.)
Contrast Ratio: 1000:1
Response time: 16ms(Tr+Tf)
Viewing Angle: Up 85°/ Down 85°/ Left 85°/ Right 85° (typ) @ CR>10
External speaker output impedance       Rating 7W x 7W (Ohm)
Frequency Horizontal: 15.625kHz, 15.734kHz, 31.5kHz - 91.1kHz...

1-36 
English-35
English
Specifications for MDT461S
Product SpecificationsAnalog Input Digital Input
LCD Module 46" / 116.8cm diagonal
Pixel Pitch: 0.7455mm
Resolution: 1366 x 768 dots
Color: Over 16 million colors (depending on video card used)
Brightness: 450cd/m
2(Typ.)
Contrast Ratio: 800:1
Response time: 16ms (Tr+Tf)
Viewing Angle: Up 85°/ Down 85°/ Left 85°/ Right 85° (typ) @ CR>10
External speaker output impedance       Rating 7W x 7W (Ohm)
Frequency Horizontal: 15.625kHz, 15.734kHz, 31.5kHz -...

1-37 
English-36
Pin Assignment
1) Analog RGB input (MiniDsub15p): R G B 2
Pin No Name
1 Video Signal Red
2 Video Signal Green
3 Video Signal Blue
4 GND
5 DDC-GND
6 Red-GND
7 Green-GND
8 Blue-GND
9 +5V (DDC)
10 SYNC-GND
11 GND
12 DDC-SDA
13 H-SYNC
14 V-SYNC
15 DDC-SCL
3) Digital RGB input (DVI-D): R G B 1
4) RS-232 input
Pin No Name
1NC
2 RXD
3 TXD
4NC
5 GND
6NC
7RTS
8 CTS
9NC
Pin - Assignment of DVI connector:
1 TX2- 9 TX1- 17 TX0-
2 TX2+ 10 TX1+ 18 TX0+
3 Shield (TX2 / TX4) 11 Shield (TX1 / TX3) 19...