Mitsubishi Mdt461s Users Manual

1-1 
Users Manual 
USER’S MANUAL
MANUEL UTILISATEUR
MANUAL DEL USUARIO
 

1-2 
English-1
English
Important Information ..................................................................................................... English-2
Safety Precautions, Maintenance & Recommended Use .............................................. English-4
Contents ......................................................................................................................... English-5
Parts Name and Functions
Control Panel...

1-3 
English-2
DECLARATION OF CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
U.S. Responsible Party: Mitsubishi Digital Electronics America, Inc.
Address: 9351 Jeronimo Road,
Irvine, California 92618 U.S.A.
Tel. No.: +1 - (949) 465-6000
Type of Product: Computer Monitor...

1-4 
English-3
English
We hereby certify that the color monitor MDT402S
(L404G6) / MDT461S (L464G7) is in compliance with
Council Directive 73/23/EEC:
– EN 60950-1
Council Directive 89/336/EEC:
– EN 55022
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
and marked withMitsubishi Electric Corporation
2-2-3, Marunouchi,
Chiyoda-Ku
Tokyo 104-8310, Japan
Declaration
Declaration of the Manufacturer
Important Information
Declaration of the Manufacturer
This LCD Monitor uses a lamp that contains mercury. Disposal of...

1-5 
English-4
FOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP AND USING
THE MDT402S / MDT461S LCD COLOR MONITOR:
•DO NOT OPEN THE MONITOR. There are no user
serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.
• Do not spill any liquids into the cabinet or use your monitor
near water.
• Do not insert objects of any kind into the cabinet slots, as
they may touch dangerous...

1-6 
English-5
English
Contents
Power Cord for
EU
User’s ManualVideo Signal Cable
(D-SUB to D-SUB Cable)
Wireless Remote Control
and AA BatteriesClamper x 3
CD-ROMFerrite Core x 2
Band x 2 Thumbscrew
for stand x 2
Stand for the
Independence x 2
Screw (M4 x 8) x 4 Main switch coverPower Cord for
North America
Speaker Plug x 1set
(Required for optional
Loudspeakers)
(Attached on external
speaker terminal)
Your new MDT402S / MDT461S monitor box* should contain the following:
• LCD monitor
• Power Cord (3m)...

1-7 
English-6
EXITMUTEINPUT
81234567
EXITMUTEINPUT
9
10
7 DOWN () button
Activates the OSD menu when the OSD menu is turned-off.
Acts as 
 button to move the highlighted area down to
select the adjustment with OSD menu.
8EXIT button
Activates the OSD menu when the OSD menu is turned-off.
Acts as EXIT button to move to previous menu with OSD
menu.
9Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the
wireless remote control). See also page 9.
Glows green...

1-8 
English-7
English
Terminal Panel
1 AC IN connector
Connects with the supplied power cord.
2 RGB 1 IN (DVI-D)
To input digital RGB signals from a computer or HDTV
device having a digital RGB output.
* This connector does not support analog input.
3 RGB 2 IN (mini D-Sub 15 pin)
To input analog RGB signals from a personal computer or
other RGB equipment.
4 RGB 3 [R, G, B, H, V] (BNC)
IN connector: To input analog RGB signals or signals from
other RGB equipment.
5 RGB OUT connector (BNC)
To output the...

1-9 
English-8
1 POWER button
Switches the power on/off.
* If Power Indicator is not glowing, then no controls will work.
2 INPUT button
Selects from input signal, [RGB1],  [RGB2],  [RGB3], [DVD/HD],
[VIDEO] and [VIDEO].
[VIDEO] is enabled by selecting the “SEPARATE” mode in
the OSD or by having the “S VIDEO” cable connected with the
“S VIDEO” signal present and selecting “PRIORITY”   MODE.
See page 26.
3 AUDIO INPUT button
Selects from input audio signal, [AUDIO1], [AUDIO2],
[AUDIO3].
4 SIZE button...

1-10 
English-9
English
3030
Point the top of the remote control toward the LCD monitor’s
remote sensor during button operation.
Use the remote control within a distance of about 7 m/23 ft.
from the front of the LCD monitor’s remote control sensor
and at a horizontal and vertical angle of within 30° within a
distance of about 3 m/10 ft.
Operating Range for the Remote Control
Caution:Important, the remote control system may not
function when direct sunlight or strong
illumination strikes the remote...