Mitsubishi Mdt321s Users Manual

1-31 
English-29
English
3) Control sequence
(1) The command from a computer to the LCD monitor will be sent in 600ms.
(2) The LCD monitor will send a return command 600ms* after it has received and encoded. If the command isn’t
received correctly, the LCD monitor will not send the return command.
(3) The personal computer checks the command and confirms if the command, which has been sent, has been executed or not.
(4) This LCD monitor sends various codes other than return code. When having a control...

1-32 
English-30
Features
Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight
limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another.
Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a
variety of standards.
sRGB Color Control: A new optimized color management standard which allows for color...

1-33 
English-31
English
Troubleshooting
No picture
• The signal cable should be completely connected to the display card/computer.
• The display card should be completely seated in its slot.
• Front Power Switch and computer power switch should be in the ON position.
• Check to make sure that a supported mode has been selected on the display card or system being used.
(Please consult display card or system manual to change graphics mode.)
• Check the monitor and your display card with respect to...

1-34 
English-32
Specifications
Product Specifications Analog Input Digital Input
LCD Module Diagonal: 32" / 80.0cm
Pixel Pitch: 0.511mm
Resolution: 1366 x 768 dots
Color: Over 16 million colors (depending on video card used)
Brightness: 500cd/m
2(Typ.)
Contrast Ratio: 600:1
Response time: 20ms  (Tr+Tf)
Viewing Angle: Up 88°/ Down 88°/ Left 88°/ Right 88° (typ) @ CR>10
Design View Distance: 875 mm/34.4 inches
Frequency Horizontal: 15.625/15.734kHz, 31.5kHz - 91.1kHz 31.5kHz - 91.1kHz
Vertical:...

1-35 
English-33
English
Pin Assignment
1) Analog RGB input (MiniDsub15p): R G B 2
Pin No Name
1 Video Signal Red
2 Video Signal Green
3 Video Signal Blue
4 GND
5 DDC-GND
6 Red-GND
7 Green-GND
8 Blue-GND
9 +5V (DDC)
10 SYNC-GND
11 GND
12 DDC-SDA
13 H-SYNC
14 V-SYNC
15 DDC-SCL
2) S-VIDEO input: V I D E O
Pin No Name
1 GND
2 GND
3 Y (Luminance)
4 C (Chroma)
3) Digital RGB input (DVI-D): R G B 1
4) RS-232 input
Pin No Name
1NC
2 RXD
3 TXD
4NC
5 GND
6NC
7RTS
8 CTS
9NC
Pin - Assignment of DVI connector:
1...

1-36 
Part No.1E504541
Printed in China
North AmericaMESCA (Mitsubishi Electric Sales Canada Inc.)
http://www.mitsubishielectric.ca
Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2,
Canada
Sales Phone: +1-(905) 475-7728
Fax: +1-(905) 475-7958
E-mail: [email protected]
Technical Phone: +1-(905) 475-7728
Fax: +1-(905) 475-7958
Customer Care
E-mail: [email protected]
MDEA (Mitsubishi Digital Electronics America, Inc.)
(Warranty Registration)...