Mitsubishi Mdt321s Users Manual

1-21 
English-19
English
MAIN MENUPICTURE
SCREEN
AUDIO
PIP
CONFIGURATION 1
CONFIGURATION 2
ADVANCED OPTION
:SELSET:NEXT:RETURNMENU:EXIT MENU
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
COLOR CONTROL
COLOR TEMPERATURE
PICTURE RESET
:SELSET:NEXTEXIT:RETURNMENU:EXIT MENU
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
COLOR CONTROL
COLOR TEMPERATURE
PICTURE RESET
:SELSET:NEXT:RETURNMENU:EXIT MENU+ -:ADJ:RETURNMENU:EXIT MENU
32BRIGHTNESS
EXITEXITEXIT
OSD (On-Screen-Display) Controls
Press MENU button...

1-22 
English-20
Adjust the tint of the screen.
Press + button to Skin color becomes greenish.
Press - button to Skin color becomes purplish.
Adjust the color depth of the screen.
Press + button to increase color depth.
Press - button to decrease color depth.
R, G, B: Increases or decreases Red, Green and Blue,
depending upon which is selected. The change in color
will appear on screen and the direction (increase or
decrease) will be shown by the color bars.
NOTE: sRGB picture mode is standard and cannot...

1-23 
English-21
English
Adjusts the vertical size by increasing or decreasing the
setting.
Press + button to expand the height of the image on the
screen.
Press - button to narrow the height of the image on
the screen.
Selects the screen zoom mode. Zoom mode will be
selected when you select the “ZOOM” by pushing the
“SIZE” button on remote controller.
When you select the “CUSTOM”, you will be able to
adjust optional horizontal and vertical size.
You can also select 16:9, 14:9 and DYNAMIC.
(INPUT...

1-24 
English-22
Main-Menu
PICTURE IN PICTURE
Sub-Menu
Selecting the size of picture inserted at the
“Picture-in-Picture” (PIP) mode.
“Large”, “Middle” and “Small” are available.
Selecting the sound source in PIP mode.
When selecting “MAIN AUDIO”, you will get the sound
for the main picture and when selecting “PIP AUDIO”,
you will get the sound for the picture instead.
Selecting PIP Reset allows you to reset all OSD
settings from PIP setting.
Select “Yes” and press “SET” button to restore the
factory...

1-25 
English-23
English
Select “SCREEN SAVER” functions to reduce the risk of
the “image persistence”.
GAMMA: The display gamma is changed and fixed when
selected “ON”.
COOLING FAN: The built in cooling fan is always on
when set “ON”.
BRIGHTNESS: The brightness is decreased when
selected “ON”.
MOTION: Image is slightly expanded and moves
4 directions (UP, DOWN, RIGHT, LEFT) periodically
(Need setting the time for movement).
Movement area is approximately +/- 10mm from original
position; Please locate...

1-26 
English-24
The OSD control menu will stay on as long as it is use.
In the OSD Turn Off submenu, you can select how long
the monitor waits after the last touch of a button to shut
off the OSD control menu. The preset choices are
10 -240 seconds.
Selects the information OSD display or not. The
information OSD will display when input signal or
source change or warning message like as no-signal or
out-of range.
A time between 3 to 10 seconds is available.
To select OFF TIMER mode ON/OFF.
In the OFF...

1-27 
English-25
English
Main-Menu
ADVANCED OPTION
Sub-Menu
Selects the S-Video input port function.
PRIORITY:
If cable is connected to the S-Video input, it will have
priority the composite input port.
SEPARATE:
S-Video port and Composite port are selectable as
independent input port.
Selects to decision of input signal about below timings,
1024x768, 1280x768 and 1360x768.
AUTO: Determines the resolution automatically.
1024x768: Determines the resolution as 1024x768
1280x768: Determines the resolution...

1-28 
English-26
TILING demonstrates multiple screens. This feature
provides a single large screen using up to 16 monitors.
It will be able to divide up to 4 each H and V.
This requires you to feed the PC output into each of the
monitors through a distributor.
H MONITORS: Select number of horizontal divide.
V MONITORS: Select number of vertical divide.
POSITION: Select a position to expand the screen.
FRAME COMP: Works in tandem with TILING to
compensate for the width of the tile bezels in order to...

1-29 
English-27
English
NOTE 1: IMAGE PERSISTENCEPlease be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when a
residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not
permanent, but constant images being displayed for a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For...

1-30 
English-28
Controlling the LCD monitor via RS-232C Remote Control
This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
Functions that can be controlled by a personal computer are:
• Power ON or OFF
• Switching between input signals
Connection
LCD Monitor + PC
NOTE:If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter
is required. Contact your dealer for details.
* RS-232 OUT terminal can connect...