Mitsubishi Fd730u Projector User Manual

EN-31
Network settings (continued)
Setting or Clearing DHCP
1.Disp lay the IP CONFIG menu.
2. Press the 
 or  bu tton to select DHC P.
3. Press the ENTER  button .
•C onrmation dialog appears .
4. Press the 
 or   button to select ON   or OFF  . 
5. Select the item to set, and press the ENTER  button .
•T o cancel the setting, pr ess the MENU  button .
•I t may take some time to  reect the settings .
• When setting DHCP to ON, IP ADDRES S, SUBNET MASK,  
and DE FAUL T GA TEWA Y cannot be set. If  you set...

EN-32
Network settings (continued)
How to Use Netw ork Function
•When connecting a computer and pr ojector with LAN, cong-
ur e the both IP Addr esses in the same network  group.
If connecting in dif fere nt network  group , be sur e to use a 
r outer . As for the settings of a r outer, ask the networ k adminis-
tr ato r.
•C ongure the IP  CONFIG corr ectly. If the settings ar e not cor-
re ct, the communication ma y be unavailab le. Fo r the detail, 
consult the network administ rato r.
•D epending on...

EN-33
Setting of the  image displa yed during  startup 
or  mu ting
You can display your desir ed image as the startup scr een (or splash 
scr een). Using the menu, y ou can also use such image as a ba ck-
gr ound that is displ ayed while the video is muted or no signal is sup -
plied.
Impor tant:
•Y ou can’ t set IMAGE CAPTURE when P ASSWORD FUNCTION in 
the FEA TURE menu has been set to SPLASH ID SCREEN to  
enab le the pass word lock.
•Y ou can’ t set IMAGE CAPTURE when the component video signal 
is...

EN-34
Advanced features (continued)
•When  you displa y 60-Hz and 50-Hz video signals at the 
same time , motion images ma y not be displayed pr operly.  In  
this  case, set VE RT. SYNC of USER  in the SIGNAL me nu to  
OFF  for the left scr een. (See page 25.)
• When BA CK COLOR of the INST ALLATION menu is set to  
IMAG E, you cannot use the split mode .
To chan ge the input sour ce of the left or right scr een:
•To change the input sour ce of the left screen, press the  bu tton  
on the r emote contr...

EN-35
Setting the efficient mode
By pressing the EFFICIENT MODE button, you 
can display the EFFICIENT MODE menu to set the 
following menu items: LAMP MODE, STANDBY 
MODE, and AUTO POWER OFF. (For details of each 
item, see page 23.)
1. Press the EFFICIENT MODE button.
•	 The	EFFICIENT	MODE	menu	appears.
LAMP MODE
STANDBY MODE ST
ANDA RD
ST
ANDA RD
EFFICIENT MODE
AUTO PO WER
OFF  OFF
2. 
Select an desired item to set by pressing the  or 
 button.
3. Set the selected item by pressing the  or ...

EN-36
Connection
For details of the connection, see “LAN control UTILITY operation manual” in the CD-ROM.
When STANDBY MODE in the INSTALLATION menu or the EFFICIENT MODE menu of the projector 
is set to LOW, the LAN network is disabled. To enable the LAN network, set STANDBY MODE to 
STANDARD. (See page 23.)
Configure the initial network settings first. 
You	can	configure	the	initial	settings	using	the	projector	menu	(see	pages	30	to	32)	or	ProjectorView	Global+	or	
ProjectorView.	For	details	of...

EN-37
This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector. Contact your dealer for purchase of the lamp. 
Spare lamp for FD730U/FD730U-G: VLT-XD700LP
Caution:•	 Do	not	remove	the	lamp	immediately	after	using	the	projector. You may get burned because the...

EN-38
Lamp replacement (continued)
3. Assemble the lamp replacement attachment by folding two taping portions (g) and two cutout portions (h) along the folding line as the figure.
(h)
(h)(g)
(g)
4.  Insert the two cutout portions (h) in the slit of the projector, paste the two taping portions (g) with the tape included in the lamp replacement attachment, and then fix the lamp replacement attachment to the projector.
(g)
(g)
(h)
5. Pull out the lamp unit (f) in the bag by the handle (e).
(f)
(e)
6....

EN-39
Troubleshooting
Before asking for repair of the projector, check the following. If the symptom persists, stop using the projector, be 
sure to unplug the power plug, and then contact your dealer.
No image appears on the screen.
ProblemSolution
Power can not be 
turned on.
•	 Check	whether	the	indicators	are	on	or	off	and	how	they	are	lightning.
POWERSTATUSSolution
OffOff•	 Connect	the	power	cord	to	the	projector.
•	 Plug	the	power	cord	into	a	wall	outlet.
Steady red
Off
•	 If	any	objects	are...

EN-40
Troubleshooting (continued)
No image appears on the screen. (continued) 
ProblemSolution
The screen for 
entering the password 
appears.
•	 PASSWORD	FUNCTION	in	the	FEATURE	menu	has	been	set	to	DISPLAY	INPUT	to	
enable the password lock. 
 Enter the password or contact the person in charge of management of the 
projector. (See page 34.)
“NO SIGNAL” is 
displayed.
•	 Turn	on	the	power	of	the	connected	device,	or	check	whether	there	is	something	
wrong with the connected device.
•	 Check	whether	the...