Mitsubishi Fd630u G Projector User Manual

EN-21
ENGLISH
Menu operation (continued)
Basic operationSeveral settings can be adjusted using the menu.
Example : Auto power off time setting
1. Press the MENU button.
2. Select the DETAIL MENU and press the ENTER button  (or T 
button).
3. Press the W or X button to select INSTALLATION. 
4. Press the ENTER button (or T button).5. Press the S or T button to select AUTO POWER OFF.
6. Press the W or X button to adjust the auto power off time.
7. Exit the menu by pressing the MENU button several times....

EN-22
Menu operation (continued)
2. INSTALLATION menu
 The STANDARD lamp mode is activated by default whenever the projector is turned on. When the LOW LAMP MODE has been chosen, the 
default STANDARD lamp mode is switched to the LOW lamp mode in 1 minute.
 In AUDIO INPUT, HDMI audio is selected when the Input Source is HDMI input. The audio of AUDIO 1, AUDIO 2, AUDIO 3, and MIX   cannot 
be selected.
Menu option Setting Feature description
WA LL  SC R EE NOFF/BEIGE / LIGHT 
BLUE / LIGHT GREEN / PINK...

EN-23
ENGLISH
Menu operation (continued)
3. FEATURE menu
 You can select CINEMA MODE only when the input signal is a TV60, TV50, 480i, 576i or 1080p video signal.
Menu option Setting Feature description
ASPECTAUTOSelect to change the aspect ratio automatically depending on the 
input signal. (Select this option for normal use.)
16:9Select to project images in full size (1920 x 1080 pixels) irrespective of 
type of input signal.
REAL Select to project images in their original size as input.
PASSWORD...

EN-24
Menu operation (continued)
4. SIGNAL menu
 Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.
 When you change the horizontal or vertical position to a large extent, noise may appear.
 The adjustable range of the vertical position varies depending on the type of the input signal. Though the image may stay in the same position 
even when the setting value is changed, such symptom is not a malfunction.
 SHUTTER will not work correctly during...

EN-25
ENGLISH
Menu operation (continued)
5. NETWORK menu
6. INFORMATION menu
Menu option Setting Feature description
NETWORK IP CONFIG 
menu
PROJECTOR NAME*****
...Displays PROJECTOR NAME. Displays PROJECTOR NAME in 
blank when PROJECTOR NAME is not set.
SET
 Set PROJECTOR NAME. Enter up to 15 characters (alphabets or 
numeric characters).
NETWORK PASSWORD OK
 Set the password for Web control or PJLink certification.
IP CONFIG OK Select this setting for IP Configuration.
DHCP ON  / OFF Use this setting...

EN-26
Image adjustment
Adjusting projected images
To adjust the brightness (CONTRAST and BRIGHT-
NESS):
You can make adjustments of the brightness of the projected image 
using the menu.
(See page 19 or 21 for the menu options.)
1. Display the QUICK MENU or the IMAGE menu.
2. Select CONTRAST or BRIGHTNESS by pressing the S or T 
button.
3. Adjust the selected option by pressing the W or X button.
To cancel the menu:
4. Press the MENU button.
CONTRASTSelect to adjust the contrast of the image. Every time...

EN-27
ENGLISH
Image adjustment (continued)
BrilliantColorTM
Use this setting to make colors with medium brightness, such as yellow and the skin tone appear natural. Press the W button to decrease the value 
to lessen the effect. Press the X button to increase the value to heighten the effect. (BrilliantColorTM has no effect at value 0.)
6. Select a value by pressing the W or X button.
 For more enhanced color reproduction, set BrilliantColor
TM to 0. The white area of the color wheel is disabled, and...

EN-28
Image adjustment (continued)
How to adjust the image supplied from the computer using the menu:Carry out the following procedures according to the symptoms.
Wide strips appear. ....................................................... Adjust TRACKING in the SIGNAL menu.
The projected image flickers.
The projected image is blurred.  .................................... Adjust FINE SYNC. in the SIGNAL menu.
The projected image is displaced horizontally.  ............. Adjust HORIZ. POSITION in the...

EN-29
ENGLISH
Network settings
You can set the network of the projector using the menu.
Setting Projector Name1. Display the NETWORK menu. (See page 21 for menu setting.)
2. Press the S or T button to select PROJECTOR NAME.
3. Press the W or X button to select SET   .
4. Press the ENTER button.
 PROJECTOR NAME screen appears.
5. Press the direction buttons to move the key cursor, select the 
characters or marks to enter, and press the ENTER button.
 Projector Name can be set using up to 15 characters...

EN-30
Network settings (continued)
Setting or Clearing DHCP1. Display the IP CONFIG menu.
2. Press the S or T button to select DHCP.
3. Press the ENTER button.
 Confirmation dialog appears.
4. Press the W or X button to select ON   or OFF   . 
5. Select the item to set, and press the ENTER button.
 To cancel the setting, press the MENU button.
 It may take some time to reflect the settings.
 When setting DHCP to ON, IP ADDRESS, SUBNET MASK, 
and DEFAULT GATEWAY cannot be set. If you set those set-...