Mitsubishi Electric Mdt651s Users Manual

English-47
English
OFF H FLIP
Horizontally 
rotatedV FLIP
Ver tically 
rotated
OSD screen functions (continued)
CONFIGURATION2
 CAT5 CONTROL
[CAT5 CABLE LENGTH]
Select the cable length, and the defaults of all the 
adjustment values are automatically determined.
Select the length that is closest to the actual length of your 
cable. 
[CAT5 EQ.]
Make adjustment so that blur and smear of the displayed 
letters and graphic objects are minimized.
[CAT5 RED GAIN, GREEN GAIN, BLUE GAIN]
When the displayed...

English-48
OSD screen functions (continued)
 SCHEDULE
You can program the LCD monitor operation schedules. (See 
page 35.)
< HOW TO SETUP SCHEDULE >
Using the “SCHEDULE” function allows you to set up to 
seven different scheduled time intervals when the LCD 
Monitor will be activated.
You can select the time the monitor turns on and turns off, 
the day of week the monitor is activated, and which input 
source the monitor will use for each scheduled activation 
period. A check mark in the box next to the...

English-49
English
OSD screen functions (continued)
ADVANCED OPTION
 INPUT RESOLUTION
* For the RGB3 and RGB4 inputs only.
You can select the following resolutions according to 
the input signal: AUTO, 1024x768, 1280x768, 1360x768, 
1366x768, 1400x1050, 1680x1050, 1600x1200, and 
1920x1200. AUTO selects the resolution automatically.
The setting you select becomes effective when POWER is 
turned OFF and ON again.
  BLACK LEVEL EXPANSION
Selects a level of black expansion from “OFF”, “MIDDLE” 
and...

English-50
OSD screen functions (continued)
 H E AT  S TAT U S
The statuses of the cooling fan, brightness, and internal 
temperature are displayed.
NOTE: The cooling fan starts running according to the 
operating temperature or when COOLING FAN is 
ON in the SCREEN SAVER menu.
  When the operating temperature substantially 
exceeds the operation guaranteed range, the 
message “TEMPERATURE WARNING!!” is displayed 
on the screen.
  POWER ON DELAY
You can adjust the delayed time until the power-on mode...

English-51
English
Picture size
RGB1, 2, 3, 4, 5, 6
 FULL  NORMAL  CUSTOM  REAL
DVD/HD
 FULL  NORMAL  DYNAMIC  CUSTOM  REAL
VIDEO, VIDEO
 FULL  NORMAL DYNAMIC  CUSTOM  REAL
NORMAL:  Images supplied from external devices such 
as PC and DVD fi t the screen, keeping their 
original aspect ratio.
FULL:  Images are displayed on the entire screen.
DYNAMIC:  4:3 images are enlarged on the entire 
screen with non-linearity. (Round images 
may be cut when enlarged.)
CUSTOM (ZOOM):  You can enlarge the displayed...

English-52
Master: Monitor confi gured as Master that detects the 
outside light (Monitor ID is “1”.)
Slave:  Monitor controlled by the Master monitor (Monitor 
ID is other than “1”.) 
Monitor
ID = 9
(Slave)
Monitor
ID = 6
(Slave)
Monitor
ID = 3
(Slave)Monitor
ID = 8
(Slave)
Monitor
ID = 5
(Slave)
Monitor
ID = 2
(Slave)Monitor
ID = 7
(Slave)
Monitor
ID = 4
(Slave)
Monitor
ID = 1
(Master)
Other functions (continued)
Supplemental information of the auto brightness function
To control multiple monitors...

English-53
English
PIP POP SIDE BY SIDE
ASPECTSIDE BY SIDE
FULLOFF
PIP, POP function
The following table shows the combinations of signal inputs with which the “PIP” and “POP” modes function. However, these modes 
do not function when the screen size is “CUSTOM” or “REAL”.
Sub screen
RGB1
(HDMI)RGB2
(DVI-D)RGB3
(D-SUB)RGB4
(BNC)RGB5
(CAT5)RGB6
(DISPLAY 
PORT)DVD/HD
(YPbPr)VIDEO VIDEO
Main screen
RGB1 (HDMI)×××××××

RGB2 (DVI-D)×××××××

RGB3 (D-SUB)×××××××

RGB4 (BNC)×××××××

RGB5 (CAT5)×××××××...

English-54
 Remote control numbering function
By connecting multiple MDT651S monitors using RS-232C cables, you can control any one monitor or all the monitors by one 
remote controller. 
1.  Assign arbitrary ID number to each of multi-connected MDT651S monitors using MONITOR ID. 
  ID numbers 1 to 26 are selectable. 
  It is recommended to assign sequential ID numbers from 1 and up. 
2.  The remote control mode of the fi rst MDT651S monitor is set to PRIMARY and those of the other monitors are set to...

English-55
English
No picture
•  The signal cable should be securely connected to the display card/computer.
•  The display card should be securely seated in its slot.
•  The Main Power Switch and the computer power switch should be in the ON position.
•  Make sure that the correct mode has been selected on the display card or system being used.
  (Please consult the display card or system manual to change the graphics mode.)
•  Check the monitor and your display card with respect to the compatibility...

English-56
Orientation Landscape / Portrait
Dimension (Unit: mm)
6076139
1498
873
1436
811
LCD ModuleScreen size (diagonal) 65” (1639 mm)
Panel Type VA
Panel Pitch 0.744 mm
Resolution 1920 x 1080 pixels (Full HD)
Color Approximately 1.06 Billion
Brightness (typ.) 700 cd/m2
Contrast ratio 2500 : 1
Viewing Angle (CR>
=10) Up/Down 178°, Left/Right 178°
Response time 8 ms (Gray to Gray)
Viewable Size (H x V ) 1428.5 mm x 803.5 mm / 56.2” x 31.6”
Power Management VESA DPM
Plug and Play VESA DDC2B, DDC/CI
Auto...