Mitsubishi Electric Mdt651s Users Manual

English-27
English
Connecting the power source
•  The power outlet socket should be installed as near the equipment as possible and should be easily accessible.
•  Fully insert the prongs into the power outlet socket. 
  Loose connection may cause noise.
NOTE:
Please refer to “Safety Precautions, Maintenance & Recommended Use” in this manual for proper selection of the AC power cord.
Use the clamper to prevent accidental disconnection of the power cord.
 P-8  Connecting the power cord to the monitor...

English-28
Flow of How to Using
U-1
U-2
U-3
U-4
U-5
U-6
U-7
U-8
U-9
U-10
U-11
Carry out as necessary
 Page 29
 Page 30
 Page 31
 Page 31
 Page 32
 Page 33
 Page 32
 Page 33
 Page 34
 Pages 34 to 35
 Pages 36 to 38
Turning on all the connected devices
Selecting the video input
Controlling the external devices
Selecting the OSD language
RGB3, RGB4, and RGB5 only
Auto-setup
Selecting the picture mode
Screen adjustment
Picture adjustment
Volume cont rol
Schedule setting
Remote control
How to Use
 

English-29
English
 U-1   Turning on all the connected devices
Wireless remote 
control  Power Indicator
Status LED
Power ON Green
Power OFF Red
Power Standby when 
“SCHEDULE” is enableRed On
Green Blinking
Power Standby Red, Green
Diagnosis (Detecting failure) Red Blinking
* See troubleshooting on page 55.
Turning on external devices
1.  Turn on the connected devices such as 
the computer and VCR. 
  Before turning on the monitor, turn on the computer.
Turning on the monitor
2. Turn on the Main Power...

English-30
You can select the desired video input using the wireless remote control or the INPUT button on the monitor.
  Select using the INPUT buttons on the wireless remote control.
  You can select the desired video input by pressing the corresponding INPUT button on the wireless remote control. 
  Selectable video inputs are [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [RGB5] (CAT5), [RGB6] (DISPLAY 
PORT), [DVD/HD] (YPbPr), [VIDEO], and [VIDEO]. 
  Select using the INPUT button on...

English-31
English
You can control the externally connected devices to display images supplied from them.
 U-4   Selecting the OSD language
Select the OSD language using LANGUAGE in the CONFIGURATION1 menu of the OSD screen function. See page 46.
 U-3   Controlling the external devices
VCR, etc.
Personal computer
 

English-32
HIGHBRIGHT:   The brightness is maximized.
STANDARD:   Factory default setting.
sRGB:   Suitable for color matching with sRGB-compliant devices.
CINEMA:   Suitable for viewing movies.
 U-5  Auto-setup  Analog inputs only
The AUTO SETUP button on the wireless remote control or AUTO SETUP in the OSD menu automatically adjusts the screen size, 
horizontal/vertical position, clock, clock phase, white level, and black level.
NOTE:
The auto setup works on RGB3, RGB4, and RGB5 only.
 U-6   Selecting...

English-33
English
When images aren’t displayed properly even after the auto setup, you can alternatively adjust the screen by pressing the MENU 
button on the wireless remote control or the control buttons on the rear of the monitor to display the OSD menu. Using the SCREEN 
settings in the OSD menu, you can adjust the horizontal/vertical position, clock, clock phase, zoom mode, CUSTOM ZOOM, 
horizontal resolution, and vertical resolution.
NOTE:
The position adjustment works on RGB3, RGB4, DVD/HD,...

English-34
When outputting audio from the option stereo speakers, you can control the volume level using the VOL button on the wireless 
remote control. 
In addition, you can adjust the volume by pressing the MENU button on the wireless remote control or the control buttons on the 
rear of the monitor to display the OSD menu. Using the AUDIO settings in the OSD menu, you can adjust the balance, treble, and 
bass.
 U-10  Schedule setting  Carry out as necessary
You can program the power-on/off and input...

English-35
English
How to set up schedule
When the cursor is on any of the check boxes showing the program numbers 1 to 7 on the left side of the screen, pressing the UP
(
) or DOWN () button moves the cursor vertically and pressing the PLUS (+) or MINUS (-) buttons moves it horizontally. 
By pressing the SET button, you can select or deselect the check boxes.
Check box:  When the check box is selected, the program is enabled. When it is cleared, the program is disabled. 
When the SCHEDULE screen is...

English-36
To RS-232C 
connector IN
To CAT5 RGB5 
connector OUTTo CAT5 RGB5 
connector OUT RS-232C cable
RS-232C cableUSB cableRS-232C cable
CAT5 cable CAT5 cable PC
PCType A Type BMonitor
MonitorMonitor
Monitor To RS-232C 
connector IN
To RS-232C 
connector INTo  C AT 5  
connector OUT CAT5 Tx BOX 
(accessor y)To RS-232C 
connector OUT
To CAT5 RGB5 
connector INTo CAT5 RGB5 
connector INTo RS-232C 
connector OUT
* This connection isn’t necessary 
when the USB COM port is used. 
 U-11  Remote control...