Mitsubishi Electric Ldt422v Users Manual

English-40
Enlarged
90%Motion
Move
The por tion (shaded par t) outside the 
display area isn’t displayed.
OSD screen functions (continued)
CONFIGURATION3
 POWER SAVE
When you select ON, the power management function 
(power save) is activated. 
When the RGB1, RGB2, RGB3, or RGB4 input is selected, 
the monitor goes into the sleep mode in several seconds 
after the sync signal is lost. 
When the DVD/HD or VIDEO input is selected, the monitor 
goes into the sleep mode in about 10 minutes after the input...

English-41
English
OSD screen functions (continued)
ADVANCED OPTION
 INPUT CHANGE
You can select the time for input switching from QUICK and 
NORMAL.
NOTE : When you select QUICK, slight noise may appear.
 TERMINAL SETTING
You can select the mode to display the RGB1 (HDMI) 
or RGB2 (DVI-D) signal according to their signal format 
depending on their source device.
DVI-MODE:
Select this setting when displaying the RGB2 (DVI-D) signal. 
Select DVI-PC when the source device is a PC.
Select DVI-HD when the...

English-42
Selecting a video source
To view a video source:
Use the input button to select [VIDEO].
Use the COLOR SYSTEM menu to select [AUTO], [NTSC], [PAL], 
[SECAM], [PAL60], or [4.43NTSC] according to your video 
device.
Picture size
RGB1, 2, 3, 4
 FULL  NORMAL  CUSTOM  REAL
DVD/HD
 FULL  NORMAL  DYNAMIC  CUSTOM  REAL
VIDEO, VIDEO
 FULL  NORMAL DYNAMIC  CUSTOM  REAL
NORMAL:  Images supplied from external devices such 
as PC and DVD fi t the screen, keeping their 
original aspect ratio.
FULL:  Images...

English-43
English
PIP POPSIDE BY SIDE
ASPECTSIDE BY SIDE
FULL
OFF
PIP, POP function
The following table shows the combinations of signal inputs with which the “PIP” and “POP” modes function. However, these modes 
do not function when the screen size is “CUSTOM” or “REAL”.
Sub screen
RGB1 RGB2 RGB3 RGB4 DVD/HD VIDEO VIDEO
Main screen
RGB1 ××××

RGB2 ×××××

RGB3 ×××××

RGB4 ×××××

DVD/HD×××××

VIDEO
××
VIDEO
××
By pressing the PIP ON/OFF button on the wireless remote control, you can...

English-44
No picture
•  The signal cable should be securely connected to the display card/computer.
•  The display card should be securely seated in its slot.
•  The Main Power Switch and the computer power switch should be in the ON position.
•  Make sure that the correct mode has been selected on the display card or system being used.
  (Please consult the display card or system manual to change the graphics mode.)
•  Check the monitor and your display card with respect to the compatibility and...

English-45
English
Orientation Landscape / Portrait
Dimension (Unit: mm)
1023935
527614
4483
133
LCD ModuleDiagonal (inch) 42” (1067 mm)
Display Mode IPS
Panel Pitch 0.485 mm
Resolution 1920 x 1080 pixels (Full HD)
Color Approximately 1.06 Billion
Brightness (typ.) 500 cd/m2
Contrast ratio 1300 : 1
Viewing Angle (CR≥10) Up and Down 178° / Left and Right 178°
Response time 9 ms (Gray to Gray)
Viewable Size (H x V ) 930.2 mm x 523.3 mm / 36.6” x 20.6”
Power Management VESA DPM
Plug and Play VESA DDC2B,...

English-46
Mini D-SUB 15-pin
MINI DIN 4-pinHDMI
DVI-D
D-SUB 9-pin
116 5
1
10
15
3
1 4
2
1
9
16
8
1724
18 1
19
2
9 1
5
6
Pin Assignment
1)  Analog RGB input (Mini D-SUB 15-pin): RGB3
Pin No Name Pin No Name
1 Video Signal Red 9 +5V (DDC)
2 Video Signal Green 10 SYNC-GND
3 Video Signal Blue 11 GND
4GND 12DDC-SDA
5DDC-GND 13H-SYNC
6Red-GND 14V-SYNC
7Green-GND 15DDC-SCL
8Blue-GND
2)  Digital RGB input (HDMI): RGB1
Pin - Assignment of HDMI connector:
1 TMDS Data2+ 8 TMDS Data0 Shield 15 SCL
2 TMDS Data2...

Printed in China
AW-P0827B
North America
Canada (Mitsubishi Electric Sales Canada Inc.)
http://www.mitsubishielectric.ca
Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, 
Canada
Sales Phone  :+1-(905) 475-7728
 Fax  :+1-(905) 475-7958
 E-mail  :[email protected]
Technical Phone  :+1-(905) 475-7728
 Fax  :+1-(905) 475-7958
Customer Care
 E-mail  :[email protected]
U.S.A. (Mitsubishi Digital Electronics America, Inc.)
(Warranty Registration)...