Mitsubishi Electric Ldt422v Users Manual

English-20
BNC-RCA adaptor
HDMI cable  DVD/HD IN
 ( Y·Pb·Pr, Y·Cb·Cr)
 AUDIO IN2 (RCA)
 RGB1 IN (HDMI)
 To D connector output 
 To video output 
 To HDMI output 
 Audio output 
RCA cable (audio) Signal cable
(BNC x 3 to D connector)
BNC cable
(BNC x 3 to BNC x 3)
R
B G
H VDVI IN
D-SUB IND-SUB OUTHDMI
RS-232C IN
RS-232C OUTVIDEO IN
VIDEO OUTS-VIDEO
IN1IN2
IN3
OUTR
L
Connecting a video device (component video/HDMI device)
This monitor can be connected to a video device equipped with component output such...

English-21
English
BNC cable
RCA cable (audio)
 S-VIDEO IN AUDIO IN2
 AUDIO OUT VIDEO IN
 VIDEO OUT
 VIDEO IN
 To S video output  To video output  To Audio output 
 To Audio input 
RCA cable (audio)
S video cable
BNC cable
R
B G
H VDVI IN
D-SUB IND-SUB OUTHDMI
RS-232C IN
RS-232C OUTVIDEO IN
VIDEO OUTS-VIDEO
IN1IN2
IN3
OUTR
L
Connecting a video device (composite video/S video device)/stereo amplifi er
This monitor can be connected to a stereo amplifi er. 
Refer to the user’s manual of the stereo amplifi er...

English-22
Connecting the power source
•  The power outlet socket should be installed as near the equipment as possible and should be easily accessible.
•  Fully insert the prongs into the power outlet socket. 
  Loose connection may cause noise.
NOTE:
Please refer to “Safety Precautions, Maintenance & Recommended Use” in this manual for proper selection of the AC power cord.
 P-5  Connecting the power cord to the monitor
Use the clamper to secure the 
cable fi rmly.Clamper (Accessory)
Cable holder
Power...

English-23
English
Flow of How to Using
U-1
U-2
U-3
U-4
U-5
U-6
U-7
U-8
U-9
U-10
Carry out as necessary
 Page 24
 Page 25
 Page 26
 Page 26
 Page 27
 Page 26
 Page 27
 Page 28
 Pages 28 to 29
 Pages 30 to 31
Turning on all the connected devices
Selecting the video input
Controlling the external devices
RGB3 and RGB4 only
Auto-setup
Selecting the picture mode
Screen adjustment
Picture adjustment
Volume cont rol
Schedule setting
Remote control
How to Use
 

English-24
 U-1   Turning on all the connected devices
Wireless remote 
control  Power Indicator
Status LED
Power ON Green
Power OFF Red
Power Standby when 
“SCHEDULE” is enableRed On
Green Blinking
Power Standby Red, Green
Diagnosis (Detecting failure) Red Blinking
* See troubleshooting on page 44.
Turning on external devices
1.  Turn on the connected devices such as 
the computer and VCR. 
  Before turning on the monitor, turn on the computer.
Turning on the monitor
2. Turn on the Main Power Switch....

English-25
English
You can select the desired video input using the wireless remote control or the INPUT button on the monitor.
1.  Select using the INPUT buttons on the wireless remote control.
  You can select the desired video input by pressing the corresponding INPUT button on the wireless remote control. 
  Selectable video inputs are [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [DVD/HD] (YPbPr), [VIDEO] 
(VIDEO(S)), and [VIDEO] (VIDEO). 
NOTE:
The [CAT5] and [DISPL AY PORT ] buttons...

English-26
You can control the externally connected devices to display images supplied from them.
 U-4  Auto-setup  Analog inputs only
The AUTO SETUP button on the wireless remote control or AUTO SETUP in the OSD menu automatically adjusts the screen size, 
horizontal/vertical position, clock, clock phase, white level, and black level.
NOTE:
The auto setup works on RGB3 and RGB4 only.
 U-5   Selecting the picture mode
Using the PICTURE MODE button on the wireless remote control, you can select the...

English-27
English
When images aren’t displayed properly even after the auto setup, you can alternatively adjust the screen by pressing the MENU 
button on the wireless remote control or the control buttons on the bottom of the monitor to display the OSD menu. Using the 
SCREEN settings in the OSD menu, you can adjust the horizontal/vertical position, clock, clock phase, CUSTOM ZOOM, horizontal 
resolution, vertical resolution, and input resolution.
NOTE:
The position adjustment works on RGB3, RGB4,...

English-28
When outputting audio from the option stereo speakers, you can control the volume level using the VOL button on the wireless 
remote control. 
In addition, you can adjust the volume by pressing the MENU button on the wireless remote control or the control buttons on the 
bottom of the monitor to display the OSD menu. Using the AUDIO settings in the OSD menu, you can adjust the balance, treble, and 
bass.
 U-9  Schedule setting  Carry out as necessary
You can program the power-on/off and input...

English-29
English
How to set up schedule
When the cursor is on any of the check boxes showing the program numbers 1 to 7 on the left side of the screen, pressing the UP
(
) or DOWN () button moves the cursor vertically and pressing the PLUS (+) or MINUS (-) buttons moves it horizontally. 
By pressing the SET button, you can select or deselect the check boxes.
Check box:  When the check box is selected, the program is enabled. When it is cleared, the program is disabled. 
When the SCHEDULE screen is...