Mitsubishi Electric Ldt323v Users Manual

English-27
English
When images aren’t displayed properly even after the auto setup, you can alternatively adjust the screen by pressing the MENU 
button on the wireless remote control or the control buttons  on the bottom of the monitor to display the OSD menu. Using the  
SCREEN settings in the OSD menu, you can adjust the horizonta l/vertical position, clock, clock phase, CUSTOM ZOOM, horizontal 
resolution, vertical resolution, and input resolution. 
NOTE: 
The position adjustment works on RGB3, RGB4,...

English-28
When outputting audio from the option stereo speakers, you can control the volume level using the VOL button on the wireless 
remote control.  
In addition, you can adjust the volume by pressing the MENU bu tton on the wireless remote control or the control buttons on the 
bottom of the monitor to display the OSD menu. Using the AUDIO  settings in the OSD menu, you can adjust the balance, treble, and 
bass.
 U-9   Schedule setting  Carry out as necessary
You can program the power-on/off and...

English-29
English
How to set up schedule
When the cursor is on any of the check boxes showing the program numbers 1 to 7 on the left side of the screen, pressing the UP
(
) or DOWN () button moves the cursor vertically and pressing the PLUS (+ ) or MINUS (-) buttons moves it horizontally. 
By pressing the SET button, you can select or deselect the che ck boxes.
Check box:  When the check box is selected, the program is enabled . When it is cleared, the program is disabled. 
When the SCHEDULE screen is...

English-30To RS-232C 
connector IN
RS-232C cable 
(commercially available)
RS-232C cable 
(commercially available)
PC
To RS-232C 
connector IN To RS-232C 
connector OUT
 U-10  Remote control  Carry out as necessary
RS-232C Remote control
By connecting multiple LCD monitors and a computer using RS-232C  cables (commercially available), you can control the monitors 
from the computer for the following operations: 
  Power ON or OFF
  Switching between input signals
  Volume control and mute
  Auto...

English-31
English
3)  Control sequence(1)  A command is sent from the computer to the monitor. (Commands should be  sent at intervals of at least 600 ms.)
(2)  The monitor sends a return command within 600 ms* after r eceiving and encoding the command. If the monitor fails to 
receive the command, it doesn’t send any return command.
(3)  The computer checks the return command to see that the co mmand it sent was executed or not.
(4)  The monitor sends various codes other than the return code.  While...

English-32
Adjustment status 
The values adjusted by the wireless remote control and the 
PLUS and MINUS buttons on the monitor are displayed.
Sub menu (Adjustment items)
Adjustment items are displayed.
Operation buttons (Key guide) 
Buttons for controlling the displayed OSD menu are displaye d.
PICTURE 
SCREEN 
AUDIO 
PIP CONFIGURATION1
CONFIGURATION2 
CONFIGURATION3 
ADVANCED OPTION
Main menu 
Icons other than the one you selected are grayed out.
Sub menu screen 
When you select a sub menu, an OSD...

English-33
English
Basic operation of OSD
When the MENU button on the wireless remote control or the EXIT button on the monitor is pressed, the OSD screen is displayed.
Select a main menu by pressing the 
 or  button.
INPUT
INPUT
INPUT
Accept the selected main menu  
by pressing the SET button. Accept the selected main menu 
by pressing the INPUT button.INPUT button
  button
INPUT button INPUT button
  button
Select a sub menu by pressing  
the 
 or  button.
Select a sub menu by pressing  
the  or...

English-34
OSD screen functions
PICTURE
  BRIGHTNESS
You can adjust the brightness.  
Press the PLUS (+) button to increase the brightness. Press  
the MINUS (-) button to decrease the brightness.

  CONTRAST
You can adjust the contrast.
Adjust the contrast using the PLUS (+) or MINUS (-) button  
to obtain a desired result. 
NOTE : Brightness changes luminance of the backlight. 
Contrast changes signal levels, and therefore it is 
likely to lead to whiteness.
  SHARPNESS
You can adjust the sharpness....

English-35
English
OSD screen functions (continued)
SCREEN
  AUTO SETUP
* For the RGB3 and RGB4 inputs only.
Press the SET button to automatically adjust the screen  
size, horizontal position, vertical position, clock, cloc k 
phase, white level, and black level.
   AUTO ADJUST
* For the RGB3 and RGB4 inputs only.
When AUTO ADJUST is ON, the horizontal position, vertical  
position, and clock phase are automatically adjusted at the  
time of the timing switching.
   H POSITION
You can adjust the...

English-36
OSD screen functions (continued)
AUDIO
  BALANCE
You can adjust the balance of the right and left volumes.  
Press the PLUS (+) button to decrease the left volume.  
Press the MINUS (-) button to decrease the right volume.

  TREBLE
You can adjust the high frequency sound. 
Press the PLUS (+) button to increase the treble sound.  
Press the MINUS (-) button to decrease the treble sound.
  BASS
You can adjust the low frequency sound. 
Press the PLUS (+) button to increase the bass sound....