Mitsubishi Electric Ldt323v Users Manual

English-7
English
31.5 LCD Display MonitorMODEL
Contents Power Cord
For EU 
 Video Signal Cable
(Mini D-SUB 15-pin to 
Mini D-SUB 15-pin Cable)
  Clamper x 2
(To prevent from falling)
 Screw (3x6) x 2
(To  x Main switch cover)
 Main switch cover
 Cable Holder 
 Wireless Remote 
Control and A A A 
Batteries
Your LCD monitor (LDT323V ) comes with the following: 
*  For the use in the other regions, use a power cord that 
matches the AC voltage of the power outlet and has been  
approved by and complies...

English-8
1
2
345678910
5  INPUT button
Displays the OSD menu to switch the video input.  
You can select [RGB1], [RGB2], [RGB3], [RGB4], [DVD/HD], 
[VIDEO], or [VIDEO] using the UP (
) or DOWN () button.
6  PLUS (+) button
Acts as (+) button to increase the adjustment in the OSD menu.  
Increases the audio output level when the OSD menu is off.
7  MINUS (-) button
Acts as (-) button to decrease the adjustment in the OSD menu.  
Decreases the audio output level when the OSD menu is off.
8  UP () button...

English-9
English
1  AC IN (3-pin, with earth terminal)
Connects with the supplied power cord.
2  EXTERNAL SPEAKER TERMINAL
Connects with the special stereo speakers (option).
3  AUDIO IN
Connects with the audio output connector of external  
equipment such as a computer, VCR, and DVD player. 
(a) AUDIO1: ø3.5 stereo mini-jack connector
(b) AUDIO2: RCA connector
(c) AUDIO3: RCA connector
4  AUDIO OUT (RCA)
Outputs the signal that is supplied to the selected AUDIO IN  
connector. Connects with an external...

English-10
1  POWER button
Switches the power on/off. 
*  When the Power indicator is not glowing, no controls will work.
2  INPUT buttons
Select the input signal from [RGB1] (HDMI), [RGB2] (DVI-D),  
[RGB3] (D-SUB), [RGB4] (BNC), [DVD/HD] (YPbPr), [VIDEO ], 
and [VIDEO].  
NOTE: 
The [CAT5] and [DISPL AY PORT] buttons don’t work.
3  PICTURE MODE button
Selects the picture mode from [HIGHBRIGHT], [STANDARD],  
[sRGB], and [CINEMA]. See page 26.
  HIGHBRIGHT:  The brightness is maximized.
  STANDARD:...

English-11
English
O p e r a t i n g  R a n g e  o f  t h e  W i r e l e s s  R e m ot e  
Control
Point the wireless remote control toward the LCD monitor’s  
remote control sensor during button operation.
Use the wireless remote control within a distance of about 7 m 
from the front of the LCD monitor’s remote control sensor and  
at a horizontal and vertical angle of within 30° within a dist ance 
of about 3.5 m.
30° 30°
CAUTION:  
The remote control system may not function when direct 
sunlight or...

English-12
Flow of preparation
P-1
Preparation for installation 
- Determine the installation location
- Ventilation requirements for enclosure mounting Page 13
Carry out as necessary
P-2
P-3
P-4
P-5
Carry out as necessary
Installing the speakers
Inst
alling the monitor
- Installing and removing the stands (The stands are optiona lly available.)
- Installing the main switch cover 
- Using the wall mount or ceiling mount
- Installing in the portrait position
 Pages 14 to 15
 Page 16
 Pages 17 to 21
 Page...

English-13
English
 P-1   Preparation for installationThis LCD has a temperature sensor and cooling fan. If the LCD  
becomes hot, the cooling fan will turn on automatically. If t he 
LCD becomes overheated, the “Caution” menu will appear. 
If the “Caution” menu appears, stop using the monitor and  
allow it to cool. When the LCD monitor is used in an enclosure  
or with protection on LCD surface, please check the inside 
temperature of the monitor by “HEAT STATUS” (See page 40). If  
the temperature is...

English-14
 P-2   Installing the monitor  Carry out as necessary
Installing and removing the stands
The stands are available as option. 
Refer to the user’s manual of the stand for more information.
How to install the stands 
1.  Turn the monitor off.
2.  Fasten screws on both sides of the monitor. 
NOTE: 
Install the stands so that their longer portions co me to the front.
How to remove the stands
1.  Spread the protective sheet on a  at surface, such as a  desk.
2.  Place the monitor on the protective...

English-15
English
Installing in the portrait position
Conditions: 
LDT323V can be installed in the portrait position, under the 
following conditions: 
CAUTION: 
Portrait position is available only when the monitor is wall -
mounted or ceiling-mounted.
The stands (legs) can not be  tted to the monitor in the portrait 
position.
Placing the monitor in the portrait position will shorten th e 
average life of the LCD backlight.
Operation Environment (Temperature) shall be limited, as 
shown below:...

English-16
 To speaker terminal (L)  To speaker terminal (R) 
Red(+)/Black(-)
Red(+)/Black(-)
SPEAKER (S)(L)
SPEAKER (S)(R)
NOTE: 
The speaker cord has polarity (+ and -). Match the colors of the spea
ker terminal and the connector of the cord.
CAUTION: 
Do not move the monitor with the speakers installed. 
The monitor and the speakers may be damaged and you may be inju red if the monitor falls.
Left speaker Right speaker
Before connecting the signal cable to PC and Video  Optional speakers can be...