Minolta PagePro 1200W User Manual

Installing and setting up the printer2
2-1
2 Installing and setting up the printer
2.1 Overview of the printer
External features
4
56
7
3
1
8
1011
912 2
No.DescriptionNo.Description
1 Top cover release button 7 Paper guides for manual feed tray
2 Manual feed tray 8 Tray1 (multipurpose tray)
3 Power switch (ON/OFF) 9 USB interface connector
4 Face-down tray (printed side down) 10 Parallel interface connector
5 Control panel 11 Face-up/face-down selection switch 
(printed side up/down)
6 Top cover 12 Power...

2Installing and setting up the printer
2-2Inside the printer
23
1
No.DescriptionNo.Description
1 Fusing unit 3 Drum cartridge
2 Toner cartridge
Downloaded From ManualsPrinter.com Manuals 

Installing and setting up the printer2
2-3 Optional accessories
1
2
No.DescriptionNo.Description
1 Face-up tray
(printed side up)2 Lower feeder unit (Tray 2)
(500-sheet capacity)
Downloaded From ManualsPrinter.com Manuals 

2Installing and setting up the printer
2-4Printer control panel
The control panel has two indicators and one button.
For further information on the control panel, see chapter 6.
No.Description
1 Error indicator (orange)
2 Ready indicator (green)
3 Panel button
1
2
3
Downloaded From ManualsPrinter.com Manuals 

Installing and setting up the printer2
2-5
2.2 Installing your laser printer
Place of installation
Set up the printer in a place that is

dry and free from dust

on a stable surface

well ventilated

near an easily accessible power socket

away from objects which might obstruct the printer’s ventilation grille

away from highly flammable items (such as curtains)

away from splashing liquids

away from organic gases (such as ammonia)

away from direct sunlight

away from severe temperature fluctuations...

2Installing and setting up the printer
2-6Space requirements
Be sure to provide enough space around the printer to ensure easy printer 
operation, paper and toner replacement, and maintenance.
3.9 (100 mm)
3.9 (100 mm)
23.2 in. (589 mm)
11.8 5.9 
35.1 in. (891 mm) (150 mm)  (300 mm) 
16.1 in. (410 mm)
18.7 in. (475 mm)
21.7 (550 mm) 15.6 (395 mm)
11.2 (285 mm)
Downloaded From ManualsPrinter.com Manuals 

Installing and setting up the printer2
2-7
2.3 Setting up your laser printer
Loading paper in Tray 1 
1Lay Tray1 down flat. 
2Squeeze the right paper guide and 
open the media guides.
3Place a stack of paper in the tray.
?How many sheets may I place in 
the tray?
➜Tray 1 has a capacity of 150 
sheets of plain paper. The stack 
of paper should not rise above 
the media limit mark.
4Squeeze the right paper guide and 
adjust the media guides so that both 
the left and right sides of the paper 
stack are...

2Installing and setting up the printer
2-8
❍If you installed an optional face-
up tray and you want the sheets 
to come out face up, then open 
the face-up tray instead of the 
face-down tray, and set the 
face-up/face-down selection 
switch as shown.
Loading media in the manual feed tray 
1Open the media guides.
2Move each media guide to the mark 
identifying the size of the media to 
be loaded. The illustration shows 
the media guide positions for letter-
size media.
Face-up output
Face-down output...

Installing and setting up the printer2
2-9
3Insert a sheet of media as far as 
possible into the manual feed tray 
with the side to be printed facing up.
?How many sheets may I place in 
the tray?
➜Load only one sheet of media at 
a time.
Downloaded From ManualsPrinter.com Manuals 

2Installing and setting up the printer
2-10Connecting the power cord
WARNING
Use only the power cord shipped with the printer. Using the wrong 
power cord may lead to a short-circuit!
The use of a power cord of inadequate cross-section can lead to a short-
circuit.
➜Only use an extension cable which has a higher rating than the current 
consumption of the printer.
➜Only use grounded cords.
➜Always observe the relevant local regulations regarding the connec-
tion of electrical equipment to the main...