MikroTik Router OS V3.0 User Manual
Here you can view all the pages of manual MikroTik Router OS V3.0 User Manual. The MikroTik manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 303
8 pa=pb/(1-count*pb) * ( (min+2*max)/3 + 9 ( 0 3$7 Property Description bfifo-limit(integer; default:15000) -...
Page 304
red-limit(integer) - hard limit on queue size in bytes. If the real queue size (not average) exceeds this value then all further packets will be discarded until the queue size drops below. This should be higher than red-max-threshold+red-burst red-max-threshold(integer) - upper limit for average queue size, in bytes. When the size reaches this value, all further packets shall be dropped red-min-threshold(integer) - lower limit for average queue size, in bytes. When the size reaches this value, RED starts...
Page 305
•$7 7 8 •+ 8 ( •$ •0 /ip firewall mangle •! & ? Property Description burst-limit(integerinteger) - maximum data rate which can be reached while the burst is active, in form of in/out (target upload/download) burst-threshold(integerinteger) - average data rate limit, until which the burst is allowed. If the average data rate over the...
Page 306
time period total-burst-limit(integer) - burst limit for global-total (cumulative rate, upload + download) queue total-burst-threshold(integer) - burst threshold for global-total (cumulative rate, upload + download) queue total-burst-time(time) - burst time for global-total queue total-limit-at(integer) - limit-at for global-total (cumulative rate, upload + download) queue total-max-limit(integer) - max-limit for global-total (cumulative rate, upload + download) queue total-queue(name) - queuing...
Page 307
( 8 *$ [admin@MikroTik] ip address> printFlags: X - disabled, I - invalid, D - dynamic# ADDRESS NETWORK BROADCAST INTERFACE0 192.168.0.254/24 192.168.0.0 192.168.0.255 Local1 10.5.8.104/24 10.5.8.0 10.5.8.255 Public[admin@MikroTik] ip address> + [admin@MikroTik] ip route> printFlags: X - disabled, A - active, D - dynamic,C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,B - blackhole, U - unreachable, P -...
Page 308
[admin@MikroTik] queue simple> add name=Limit-Local interface=Local \\... target-address=192.168.0.0/24 max-limit=65536/131072[admin@MikroTik] queue simple> printFlags: X - disabled, I - invalid, D - dynamic0 name=Limit-Local target-addresses=192.168.0.0/24 dst-address=0.0.0.0/0interface=Local parent=none priority=8 queue=default/defaultlimit-at=0/0 max-limit=65536/131072 total-queue=default[admin@MikroTik] queue simple> ( # %...
Page 309
1.+ !(% 6 [admin@MikroTik] ip firewall mangle> add src-address=192.168.0.1/32 \\... action=mark-connection new-connection-mark=server-con chain=prerouting[admin@MikroTik] ip firewall mangle> add connection-mark=server-con \\... action=mark-packet new-packet-mark=server chain=prerouting[admin@MikroTik] ip firewall mangle> printFlags:...
Page 310
new-connection-mark=server-con 1 chain=prerouting connection-mark=server-con action=mark-packetnew-packet-mark=server 2 chain=prerouting src-address=192.168.0.2 action=mark-connectionnew-connection-mark=lap_works-con 3 chain=prerouting src-address=192.168.0.3 action=mark-connectionnew-connection-mark=lap_works-con 4 chain=prerouting connection-mark=lap_works-con action=mark-packetnew-packet-mark=lap_work[admin@MikroTik] ip firewall mangle> + A ...
All MikroTik manuals