Miele Wt 2679 I Wpm Operating Instructions

The Miele water protection
system
The Miele water protection system
protects machine from water damage.
The system consists of three main
components:
1) the inlet hose
2) the electronic unit and the machine
housing
3) the drain hose
1) Inlet hose
– The inlet hose is tested to withstand
pressure of more than 14,000 kPa.
– It has a protective sleeve which is
made from metal to protect the hose
from damage.
2) Electronic unit and machine
housing
– Sump
Any leaking water is collected in a
sump in the base of...

Connection to the water
supply
The machine should be connected to a
mains water supply in accordance with
local and national safety regulations.
The German authorities do not require it
to have a non-return valve as the
washer-dryer has been designed to
comply with DIN regulations.
The machine is designed to operate
with a flow pressure of between
100 kPa and 1,000 kPa. If it is higher
than 1,000 kPa it is essential to fit a
reducer valve.
Connection to the mains water supply
should incorporate a mains...

Connection to the drainage
system
The machine drains via a drain pump
with a delivery head of 1 metre. The
drain hose must not be kinked as this
restricts drainage. The swivel elbow at
the end of the hose can be turned in
either direction, or can be detached if
required, with a sharp twist and pull.
If required the drain hose can be
extended to a length of 5 m. The
necessary parts can purchased from
the Miele Spare Parts Department or
your Miele dealer.Drain hose connection:
1. Direct into a sink or...

Electrical connection U.K.
All electrical work should be carried out
by a suitably qualified and competent
person, in strict accordance with
national and local safety regulations.
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains supply.
The voltage and connected load are
given on the data plate. Please ensure
these match the household mains
supply. The...

Load Consumption data
Energy Water Duration
in kWh in litres Short Normal
Washing
Cottons95°C 5.0 kg 1.70 42 1 h 53 min 2 h 08 min
60°C1)5.0 kg 0.85 42 1 h 29 min 1 h 58 min
40°C1)5.0 kg 0.49 42 1 h 29 min 1 h 58 min
Minimum iron40°C1)2.5 kg 0.44 49 1 h 05 min 1 h 20 min
Delicates30°C 1.0 kg 0.33 65 49 min 59 min
Automatic40°C 2.5 kg 0.30 - 0.60 30 - 50 1 h 00 min 1 h 15 min
Express40°C 2.5 kg 0.30 30 - 32 min
Woollens/30°C 2.0 kg 0.22 35 - 39 min
Silks/30°C 1.0 kg 0.24 39 - 36 min
Drying...

Height 850 mm
Height for building under 820 mm
Width 595 mm
Depth with lid fitted 600 mm
Depth without lid 575 mm
Depth with door open 1180 mm
Weight 106 kg
Maximum floor load 1600 Newton (approx. 160 kg)
Capacity - Washing
Capacity - Drying5.0 kg dry laundry
2.5 kg dry laundry
Voltage see data plate
Connected load see data plate
Fuse rating see plug
Consumption data see Consumption data
Water flow pressure minimum 100 kPa (1 bar)
Drain hose length 1.000 kPa (10 bar)
Inlet hose length 1,60 m
Drain hose...

The Settings menu is used to alter the
machines electronics to suit
changing requirements.
Settings can be altered at any time.
To open theSettingsmenu
ASwitch on the machine. The main
menu will appear.
15:03
Select programme
BAfter a few seconds an additional line
will appear in the display.
15:03
Select programme
SettingsF...
CConfirm your selection by pressing
theOKbutton.
DThis will take you into theSettings
menu.
CBackA
LanguageF...
Time...H
EUse the–and+buttons to select the
setting you want and...

Time of day
You first have to decide whether you
want the time to show in the display.
Then you have to select either a 24 hour
or 12 hour clock.
Then set the current time of day.
To select a 24 hour or 12 hour clock
^Use the–and+buttons to select the
clock option setting you want and
confirm your selection by pressing
theOKbutton.
The display for setting the time of day
will then appear.
To set the time of day
00:00
Set the time
^Set the hour with the–and+buttons
and confirm your setting by pressing...

Gentle action
Activating gentle action reduces the
drum action and is suitable for
washing slightly soiled items more
gently. It should be activated for
garments with a single bar under the
care label and for articles which feel
too hard after they have been dried.
Gentle action can be activated for the
Cottonsand theMinimum iron
programmes.
If Gentle action has been activated the
wash rhythm will be gentle in all Cottons
and Minimum iron programmes.
The machine is delivered with the
Gentle action...

Distribution controller
The maximum final spin speed is
limited to prevent the laundry sticking
to the drum. (This setting is only
available when washing and drying in
a continuous sequence).
There are 4 different options:
1200 rpm (factory default setting)
1100 rpm
1000 rpm
900 rpm.
A tick will appear beside the option to
show that it has been set.
Alter time
The machine is designed to dry
effectively using as little energy as
possible. However, it ispossible to
lengthen or shorten the drying time
by up...