Miele W 2809 I Operating Instructions

Height 82.0 cm
Width 59.5 cm
Depth 57.5 cm
Depth with door open 118.0 cm
Weight 93 kg
Maximum floor load 1600 Newton (approx. 160 kg)
Capacity 5 kg dry laundry
Voltage see data plate
Connected load see data plate
Fuse rating see data plate / plug
Consumption data see Consumption data
Water flow pressure minimum 100 kPa (1 bar)
Water flow pressure maximum 1000 kPa (10 bar)
Inlet hose length 1.60 m
Drain hose length 1.50 m
Connection cable length 1.60 m
Drain pump head max. 1.00 m
Drain pump length max....

Programmable functions
for changing default settings
The programmable functions are used to alter the machines electronics to suit
changing requirements.
Programmable functions can be altered at any time.
 

To access programmable functions
The programmable functions are
accessed via the
Start/Stopbutton
and the programme selector.
Before you begin, first ensure that:
–The washing machine is switched off.
–The machine is properly closed.
APress the
Start/Stopbutton and keep
it pressed in whilst carrying out steps
B-C.
BPress the
I-On/0-Offbutton in.
CAs soon as . . .
LanguageF...
. . . appears in the display, release
the
Start/Stopbutton.
To select a programmable function
DTurn the programme selector until...

Water plus
This programmable function is used
to select the water intake setting for
the
Water plusextra option.
There are three different options:
Water +
(the machine is delivered with this
option selected)
The water level is increased in the wash
and rinse stages.
Extra rinse
An extra rinse is introduced.
Water+ & Extra rinse
The water intake is increased in the
wash and rinse stages and an
additional rinse is also introduced.
Gentle action
Activating gentle action reduces the
drum action and is...

Code
A code can be used to lock the
electronics on the washing machine
to prevent it being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Code ...
^Press theStart/Stopbutton.
To activate the code
Activate
^Press theStart/Stopbutton.
The display will now request that a
code is entered.
To enter the code
The code is125and cannot be altered.
O__ __
^
Turn the programme selector...

Temperature unit
You can chose for the temperature to
be displayed as
°C/Celsiusor
°F/Fahrenheit.
The machine is delivered with
°C/Celsius as the default setting.
Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
There are two volumes:
Normal
(the machine is delivered with this
option as the default setting.)
The buzzer sounds at the end of a
programme or when Rinse hold is
reached.
Loud
The buzzer sounds at maximum volume...

Standby display
To save energy, the display goes out
and the indicator light for the
Start/
Stop
button will start flashing slowly.
The display will always go out,
–if a programme is not selected within
10 minutes of the machine being
switched on.
–10 minutes after the end of a
programme.
Pressing one of the buttons switches
the display back on again.
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
On
The...

Alteration rights reserved/4906/W 2809iM.-Nr. 06 979 010 / 00
en-GB