Miele Pw 5065 Operating Manual

							Rinse water
The water type for the rinse cycle can
be selected for the COTTONS and
MINIMUM IRON programs. The hot
water intake will be only accessible at
a wash temperature of 122°F (50°C) or
higher.
The machine comes factory set with the
water type hot selected.
Low Water Pressure
With generally low water pressure
(under 100 kPa) this option can be
activated to obtain better water intake.
The machine comes factory set with this
option off.
COTTONS water level
The program COTTONS allows you
to increase the water level for the main
wash.
The machine comes factory set with the
option Block Parameter selected. (The
water level will be controlled according to
the factory set program data.)
MINIMUM IRON water level
The program MINIMUM IRON allows
you to increase the water level for the
main wash.
The machine comes factory set with the
option Block Parameter selected. (The
water level will be controlled according to
the factory set program data.)
Temperature pre-wash
For the programs COTTONS and
Grease and fat + the pre-wash
temperature can be selected.
The machine comes factory set with the
option Block Parameter selected. (The
temperature will be controlled
according to the factory set program
data.)
Pre-wash duration
The wash time for the pre-wash can
be extended.
The machine comes factory set with the
option Block Parameter selected. (The
wash time will be controlled according
to the factory set program data.)
COTTONS duration
The program COTTONS allows you
to extend the wash time for the main
wash.
The machine comes factory set with the
option Block Parameter selected. (The
wash time will be controlled according
to the factory set program data.)
Menu Settings - Supervisor level
61
 
						

							MINIMUM IRON duration
The program MINIMUM IRON
allows you to extend the wash time
for the main wash.
The machine comes factory set with the
option Block Parameter selected. (The
wash time will be controlled according
to the factory set program data.)
Special programs list
Special programs can be added to
the program selection.
Option 1: The programs Quick wash,
Shirts, Starch, Pillows, Outerwear and
Proofing are shown. (Factory set)
Option 2: In addition to option 1
Intensive wash is offered.
Option 3: In addition to option 1 Flour,
Flour + and Grease and fat are
offered.
Option 4: In addition to option 1
Grease and fat and Grease and fat +
are offered.
Option 5: In addition to option 1 Towels
short, Towels + and Capes are
offered.
Option 6: In addition to option 1 Chem.
Therm. Dis. (Chemothermal
Disinfection 20 minutes 60°C) is
offered.
Hygiene
If a temperature lower than 140°F
(60°C) was selected for the last
wash program Hygiene is
displayed.
The machine comes factory set with
this option off.
Pre-wash
For the programs COTTONS and
MINIMUM IRON pre-wash can be
permanently added.
If the pre-wash is permanently
selected, the indicator of the pre-wash
button lights.
The machine comes factory set with the
option Menu selection activated.
COTTONS rinses
The program COTTONS allows you
to change the number of rinses.
2 rinses (factory set)
3 rinses
4 rinses
5 rinses
Menu Settings - Supervisor level
62
 
						

							MINIMUM IRON rinses
The program MINIMUM IRON
allows you to change the number of
rinses.
2 rinses (factory set)
3 rinses
4 rinses
Pre-rinse COTTONS
The program COTTONS allows a
pre-rinse of the laundry.
The machine comes factory set with
this option turned off.
Pre-rinse MINIMUM IRON
The program MINIMUM IRON
allows a pre-rinse of the laundry.
The machine comes factory set with
this option turned off.
Spin - free of charge
When operated by a coin
mechanism, the program Spin can
be offered free of charge.
The machine comes factory set with
this option turned off.
External dosage
The washer is set for connection to
an external detergent dosage
system. To use the external dosage
system the setting must be
adjusted/set accordingly.
The machine comes factory set with
this option turned off.
Leaving the Settings menu
^Press back and confirm with OK.
The display shows the main menu.
Menu Settings - Supervisor level
63
 
						

							Alteration rights reserved / 0806M.-Nr. 06 787 080 / 01
en - USA